DTS example in the bindings should be indented with 2- or 4-spaces, so
correct a mixture of different styles to keep consistent 4-spaces.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/pci/amd,versal2-mdb-host.yaml | 2 +-
.../bindings/pci/qcom,pcie-sa8255p.yaml | 74 +++++++++----------
2 files changed, 38 insertions(+), 38 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml b/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml
index 421e1116ae7e..406c15e1dee1 100644
--- a/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml
+++ b/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml
@@ -138,6 +138,6 @@ examples:
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
- };
+ };
};
};
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml
index ef705a02fcd9..bdddd4f499d1 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml
@@ -77,46 +77,46 @@ examples:
#size-cells = <2>;
pci@1c00000 {
- compatible = "qcom,pcie-sa8255p";
- reg = <0x4 0x00000000 0 0x10000000>;
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x02000000 0x0 0x40100000 0x0 0x40100000 0x0 0x1ff00000>,
- <0x43000000 0x4 0x10100000 0x4 0x10100000 0x0 0x40000000>;
- bus-range = <0x00 0xff>;
- dma-coherent;
- linux,pci-domain = <0>;
- power-domains = <&scmi5_pd 0>;
- iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
- <0x100 &pcie_smmu 0x0001 0x1>;
- interrupt-parent = <&intc>;
- interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi0", "msi1", "msi2", "msi3",
- "msi4", "msi5", "msi6", "msi7";
+ compatible = "qcom,pcie-sa8255p";
+ reg = <0x4 0x00000000 0 0x10000000>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x02000000 0x0 0x40100000 0x0 0x40100000 0x0 0x1ff00000>,
+ <0x43000000 0x4 0x10100000 0x4 0x10100000 0x0 0x40000000>;
+ bus-range = <0x00 0xff>;
+ dma-coherent;
+ linux,pci-domain = <0>;
+ power-domains = <&scmi5_pd 0>;
+ iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+ <0x100 &pcie_smmu 0x0001 0x1>;
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3",
+ "msi4", "msi5", "msi6", "msi7";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
- pcie@0 {
- device_type = "pci";
- reg = <0x0 0x0 0x0 0x0 0x0>;
- bus-range = <0x01 0xff>;
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
};
};
};
--
2.48.1
