Older steppings of the Loongson 3C6000 series incorrectly report the
supported link speeds on their PCIe bridges (device IDs 3c19, 3c29) as
only 2.5 GT/s, despite the upstream bus supporting speeds from 2.5 GT/s
up to 16 GT/s.
As a result, certain PCIe devices would be incorrectly probed as a Gen1-
only, even if higher link speeds are supported, harming performance and
prevents dynamic link speed functionality from being enabled in drivers
such as amdgpu.
Manually override the `supported_speeds` field for affected PCIe bridges
with those found on the upstream bus to correctly reflect the supported
link speeds.
This patch is found from AOSC OS[1].
Link: https://github.com/AOSC-Tracking/linux/pull/2 #1
Tested-by: Lain Fearyncess Yang <fsf@xxxxxxxx>
Tested-by: Mingcong Bai <baimingcong@xxxxxxx>
Tested-by: Ayden Meng <aydenmeng@xxxxxxxx>
Signed-off-by: Ayden Meng <aydenmeng@xxxxxxxx>
Signed-off-by: Zi Yao <liziyao@xxxxxxxxxxxxx>
---
drivers/pci/quirks.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index
d97335a401930fe8204e7ca91a8474b6b02554c1..8d29b130f45854d2bff8c47e6529a41a3231221e
100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1956,6 +1956,30 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_E7525_MCH, quir
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610,
PCI_CLASS_BRIDGE_PCI, 8, quirk_pcie_mch);
+/*
+ * Older steppings of the Loongson 3C6000 series incorrectly report the
+ * supported link speeds on their PCIe bridges (device IDs 3c19, 3c29) as
+ * only 2.5 GT/s, despite the upstream bus supporting speeds from 2.5 GT/s
+ * up to 16 GT/s.
+ */
+static void quirk_loongson_pci_bridge_supported_speeds(struct pci_dev
*pdev)
+{
+ switch (pdev->bus->max_bus_speed) {
+ case PCIE_SPEED_16_0GT:
+ pdev->supported_speeds |= PCI_EXP_LNKCAP2_SLS_16_0GB;
+ case PCIE_SPEED_8_0GT:
+ pdev->supported_speeds |= PCI_EXP_LNKCAP2_SLS_8_0GB;
+ case PCIE_SPEED_5_0GT:
+ pdev->supported_speeds |= PCI_EXP_LNKCAP2_SLS_5_0GB;
+ case PCIE_SPEED_2_5GT:
+ pdev->supported_speeds |= PCI_EXP_LNKCAP2_SLS_2_5GB;
+ default:
+ break;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, 0x3c19,
quirk_loongson_secondary_bridge_supported_speeds);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, 0x3c29,
quirk_loongson_secondary_bridge_supported_speeds);
+
/*
* HiSilicon KunPeng920 and KunPeng930 have devices appear as PCI but are
* actually on the AMBA bus. These fake PCI devices can support SVA via
---
base-commit: 3957a5720157264dcc41415fbec7c51c4000fc2d
change-id: 20250822-loongson-pci-0cca9e050843
Best regards,
--
Zi Yao <liziyao@xxxxxxxxxxxxx>
