From: Brian Norris <briannorris@xxxxxxxxxx>
As the comments in pci_pm_thaw_noirq() suggest, pci_restore_state() may
need to restore MSI-X state in MMIO space. This is only possible if we
reach D0; if we failed to power up, this might produce a fatal error
when touching memory space.
Check for errors (as the "verify" in "pci_pm_power_up_and_verify_state"
implies), and skip restoring if it fails.
This mitigates errors seen during resume_noirq, for example, when the
platform did not resume the link properly.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxx>
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
---
drivers/pci/pci-driver.c | 12 +++++++++---
drivers/pci/pci.c | 13 +++++++++++--
drivers/pci/pci.h | 2 +-
3 files changed, 21 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 302d61783f6c..d66d95bd0ca2 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -557,7 +557,13 @@ static void pci_pm_default_resume(struct pci_dev *pci_dev)
static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
{
- pci_pm_power_up_and_verify_state(pci_dev);
+ /*
+ * If we failed to reach D0, we'd better not touch MSI-X state in MMIO
+ * space.
+ */
+ if (pci_pm_power_up_and_verify_state(pci_dev))
+ return;
+
pci_restore_state(pci_dev);
pci_pme_restore(pci_dev);
}
@@ -1101,8 +1107,8 @@ static int pci_pm_thaw_noirq(struct device *dev)
* in case the driver's "freeze" callbacks put it into a low-power
* state.
*/
- pci_pm_power_up_and_verify_state(pci_dev);
- pci_restore_state(pci_dev);
+ if (!pci_pm_power_up_and_verify_state(pci_dev))
+ pci_restore_state(pci_dev);
if (pci_has_legacy_pm_support(pci_dev))
return 0;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e698278229f2..c75fec3b094f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3144,10 +3144,19 @@ void pci_d3cold_disable(struct pci_dev *dev)
}
EXPORT_SYMBOL_GPL(pci_d3cold_disable);
-void pci_pm_power_up_and_verify_state(struct pci_dev *pci_dev)
+int pci_pm_power_up_and_verify_state(struct pci_dev *pci_dev)
{
- pci_power_up(pci_dev);
+ int ret;
+
+ ret = pci_power_up(pci_dev);
pci_update_current_state(pci_dev, PCI_D0);
+
+ if (ret < 0 && pci_dev->current_state == PCI_D3cold) {
+ dev_err(&pci_dev->dev, "Failed to power up device: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
}
/**
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 1c48bc447f58..87ad201417d5 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -233,7 +233,7 @@ void pci_dev_adjust_pme(struct pci_dev *dev);
void pci_dev_complete_resume(struct pci_dev *pci_dev);
void pci_config_pm_runtime_get(struct pci_dev *dev);
void pci_config_pm_runtime_put(struct pci_dev *dev);
-void pci_pm_power_up_and_verify_state(struct pci_dev *pci_dev);
+int pci_pm_power_up_and_verify_state(struct pci_dev *pci_dev);
void pci_pm_init(struct pci_dev *dev);
void pci_ea_init(struct pci_dev *dev);
void pci_msi_init(struct pci_dev *dev);
--
2.51.0.rc1.193.gad69d77794-goog
