Add a node for the TC9563 PCIe switch, which has three downstream ports.
Two embedded Ethernet devices are present on one of the downstream ports.
As all these ports are present in the node represent the downstream
ports and embedded endpoints.
Power to the TC9563 is supplied through two LDO regulators, controlled by
two GPIOs, which are added as fixed regulators. Configure the TC9563
through I2C.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 128 +++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +-
2 files changed, 129 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 5fbcd48f2e2d839835fa464a8d5682f00557f82e..1dc4b498d39565398f83f9bfecbde19e68a61030 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -261,6 +261,30 @@ vph_pwr: vph-pwr-regulator {
regulator-max-microvolt = <3700000>;
};
+ vdd_ntn_0p9: regulator-vdd-ntn-0p9 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_NTN_0P9";
+ gpio = <&pm8350c_gpios 2 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <899400>;
+ regulator-max-microvolt = <899400>;
+ enable-active-high;
+ pinctrl-0 = <&ntn_0p9_en>;
+ pinctrl-names = "default";
+ regulator-enable-ramp-delay = <4300>;
+ };
+
+ vdd_ntn_1p8: regulator-vdd-ntn-1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_NTN_1P8";
+ gpio = <&pm8350c_gpios 3 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ pinctrl-0 = <&ntn_1p8_en>;
+ pinctrl-names = "default";
+ regulator-enable-ramp-delay = <10000>;
+ };
+
wcn6750-pmu {
compatible = "qcom,wcn6750-pmu";
pinctrl-0 = <&bt_en>;
@@ -834,6 +858,78 @@ &pcie1_phy {
status = "okay";
};
+&pcie1_port0 {
+ pcie@0,0 {
+ compatible = "pci1179,0623";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ device_type = "pci";
+ ranges;
+ bus-range = <0x2 0xff>;
+
+ vddc-supply = <&vdd_ntn_0p9>;
+ vdd18-supply = <&vdd_ntn_1p8>;
+ vdd09-supply = <&vdd_ntn_0p9>;
+ vddio1-supply = <&vdd_ntn_1p8>;
+ vddio2-supply = <&vdd_ntn_1p8>;
+ vddio18-supply = <&vdd_ntn_1p8>;
+
+ i2c-parent = <&i2c0 0x77>;
+
+ reset-gpios = <&pm8350c_gpios 1 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&tc9563_rsex_n>;
+ pinctrl-names = "default";
+
+ pcie@1,0 {
+ reg = <0x20800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ device_type = "pci";
+ ranges;
+ bus-range = <0x3 0xff>;
+ };
+
+ pcie@2,0 {
+ reg = <0x21000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ device_type = "pci";
+ ranges;
+ bus-range = <0x4 0xff>;
+ };
+
+ pcie@3,0 {
+ reg = <0x21800 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges;
+ bus-range = <0x5 0xff>;
+
+ pci@0,0 {
+ reg = <0x50000 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges;
+ };
+
+ pci@0,1 {
+ reg = <0x50100 0x0 0x0 0x0 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges;
+ };
+ };
+ };
+};
+
&pm7325_gpios {
kypd_vol_up_n: kypd-vol-up-n-state {
pins = "gpio6";
@@ -1039,6 +1135,38 @@ &sdhc_2 {
status = "okay";
};
+&pm8350c_gpios {
+ ntn_0p9_en: ntn-0p9-en-state {
+ pins = "gpio2";
+ function = "normal";
+
+ bias-disable;
+ input-disable;
+ output-enable;
+ power-source = <0>;
+ };
+
+ ntn_1p8_en: ntn-1p8-en-state {
+ pins = "gpio3";
+ function = "normal";
+
+ bias-disable;
+ input-disable;
+ output-enable;
+ power-source = <0>;
+ };
+
+ tc9563_rsex_n: tc9563-resx-state {
+ pins = "gpio1";
+ function = "normal";
+
+ bias-disable;
+ input-disable;
+ output-enable;
+ power-source = <0>;
+ };
+};
+
&tlmm {
gpio-reserved-ranges = <32 2>, /* ADSP */
<48 4>; /* NFC */
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 64a2abd3010018e94eb50c534a509d6b4cf2473b..7a840c90505e83b3c233ab13c53be818824c9b8d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2294,7 +2294,7 @@ pcie1: pcie@1c08000 {
status = "disabled";
- pcie@0 {
+ pcie1_port0: pcie@0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
--
2.34.1
