On 8/26/25 6:35 PM, Terry Bowman wrote:
> The CXL DVSECs are currently defined in cxl/core/cxlpci.h. These are not
> accessible to other subsystems.
>
> Change DVSEC name formatting to follow the existing PCI format in
> pci_regs.h. The current format uses CXL_DVSEC_XYZ. Change to be PCI_DVSEC_CXL_XYZ.
I don't think renaming is necessary. Especially changing all the existing CXL code. CXL isn't exactly considered a subset of PCI (not part of PCI consortium). IMO it may be better to leave it as it was. Maybe others have different opinions.
DJ
>
> Update existing occurrences to match the name change.
>
> Update the inline documentation to refer to latest CXL spec version.
>
> Signed-off-by: Terry Bowman <terry.bowman@xxxxxxx>
> ---
> drivers/cxl/core/pci.c | 62 +++++++++++++++++------------------
> drivers/cxl/core/regs.c | 12 +++----
> drivers/cxl/cxlpci.h | 53 ------------------------------
> drivers/cxl/pci.c | 2 +-
> drivers/pci/pci.c | 18 +++++-----
> include/uapi/linux/pci_regs.h | 60 ++++++++++++++++++++++++++++++---
> 6 files changed, 104 insertions(+), 103 deletions(-)
>
> diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
> index a3aef78f903a..d677691f8a05 100644
> --- a/drivers/cxl/core/pci.c
> +++ b/drivers/cxl/core/pci.c
> @@ -110,19 +110,19 @@ static int cxl_dvsec_mem_range_valid(struct cxl_dev_state *cxlds, int id)
> int rc, i;
> u32 temp;
>
> - if (id > CXL_DVSEC_RANGE_MAX)
> + if (id > PCI_DVSEC_CXL_RANGE_MAX)
> return -EINVAL;
>
> /* Check MEM INFO VALID bit first, give up after 1s */
> i = 1;
> do {
> rc = pci_read_config_dword(pdev,
> - d + CXL_DVSEC_RANGE_SIZE_LOW(id),
> + d + PCI_DVSEC_CXL_RANGE_SIZE_LOW(id),
> &temp);
> if (rc)
> return rc;
>
> - valid = FIELD_GET(CXL_DVSEC_MEM_INFO_VALID, temp);
> + valid = FIELD_GET(PCI_DVSEC_CXL_MEM_INFO_VALID, temp);
> if (valid)
> break;
> msleep(1000);
> @@ -146,17 +146,17 @@ static int cxl_dvsec_mem_range_active(struct cxl_dev_state *cxlds, int id)
> int rc, i;
> u32 temp;
>
> - if (id > CXL_DVSEC_RANGE_MAX)
> + if (id > PCI_DVSEC_CXL_RANGE_MAX)
> return -EINVAL;
>
> /* Check MEM ACTIVE bit, up to 60s timeout by default */
> for (i = media_ready_timeout; i; i--) {
> rc = pci_read_config_dword(
> - pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(id), &temp);
> + pdev, d + PCI_DVSEC_CXL_RANGE_SIZE_LOW(id), &temp);
> if (rc)
> return rc;
>
> - active = FIELD_GET(CXL_DVSEC_MEM_ACTIVE, temp);
> + active = FIELD_GET(PCI_DVSEC_CXL_MEM_ACTIVE, temp);
> if (active)
> break;
> msleep(1000);
> @@ -185,11 +185,11 @@ int cxl_await_media_ready(struct cxl_dev_state *cxlds)
> u16 cap;
>
> rc = pci_read_config_word(pdev,
> - d + CXL_DVSEC_CAP_OFFSET, &cap);
> + d + PCI_DVSEC_CXL_CAP_OFFSET, &cap);
> if (rc)
> return rc;
>
> - hdm_count = FIELD_GET(CXL_DVSEC_HDM_COUNT_MASK, cap);
> + hdm_count = FIELD_GET(PCI_DVSEC_CXL_HDM_COUNT_MASK, cap);
> for (i = 0; i < hdm_count; i++) {
> rc = cxl_dvsec_mem_range_valid(cxlds, i);
> if (rc)
> @@ -217,16 +217,16 @@ static int cxl_set_mem_enable(struct cxl_dev_state *cxlds, u16 val)
> u16 ctrl;
> int rc;
>
> - rc = pci_read_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, &ctrl);
> + rc = pci_read_config_word(pdev, d + PCI_DVSEC_CXL_CTRL_OFFSET, &ctrl);
> if (rc < 0)
> return rc;
>
> - if ((ctrl & CXL_DVSEC_MEM_ENABLE) == val)
> + if ((ctrl & PCI_DVSEC_CXL_MEM_ENABLE) == val)
> return 1;
> - ctrl &= ~CXL_DVSEC_MEM_ENABLE;
> + ctrl &= ~PCI_DVSEC_CXL_MEM_ENABLE;
> ctrl |= val;
>
> - rc = pci_write_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, ctrl);
> + rc = pci_write_config_word(pdev, d + PCI_DVSEC_CXL_CTRL_OFFSET, ctrl);
> if (rc < 0)
> return rc;
>
> @@ -242,7 +242,7 @@ static int devm_cxl_enable_mem(struct device *host, struct cxl_dev_state *cxlds)
> {
> int rc;
>
> - rc = cxl_set_mem_enable(cxlds, CXL_DVSEC_MEM_ENABLE);
> + rc = cxl_set_mem_enable(cxlds, PCI_DVSEC_CXL_MEM_ENABLE);
> if (rc < 0)
> return rc;
> if (rc > 0)
> @@ -304,11 +304,11 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
> return -ENXIO;
> }
>
> - rc = pci_read_config_word(pdev, d + CXL_DVSEC_CAP_OFFSET, &cap);
> + rc = pci_read_config_word(pdev, d + PCI_DVSEC_CXL_CAP_OFFSET, &cap);
> if (rc)
> return rc;
>
> - if (!(cap & CXL_DVSEC_MEM_CAPABLE)) {
> + if (!(cap & PCI_DVSEC_CXL_MEM_CAPABLE)) {
> dev_dbg(dev, "Not MEM Capable\n");
> return -ENXIO;
> }
> @@ -319,7 +319,7 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
> * driver is for a spec defined class code which must be CXL.mem
> * capable, there is no point in continuing to enable CXL.mem.
> */
> - hdm_count = FIELD_GET(CXL_DVSEC_HDM_COUNT_MASK, cap);
> + hdm_count = FIELD_GET(PCI_DVSEC_CXL_HDM_COUNT_MASK, cap);
> if (!hdm_count || hdm_count > 2)
> return -EINVAL;
>
> @@ -328,11 +328,11 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
> * disabled, and they will remain moot after the HDM Decoder
> * capability is enabled.
> */
> - rc = pci_read_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, &ctrl);
> + rc = pci_read_config_word(pdev, d + PCI_DVSEC_CXL_CTRL_OFFSET, &ctrl);
> if (rc)
> return rc;
>
> - info->mem_enabled = FIELD_GET(CXL_DVSEC_MEM_ENABLE, ctrl);
> + info->mem_enabled = FIELD_GET(PCI_DVSEC_CXL_MEM_ENABLE, ctrl);
> if (!info->mem_enabled)
> return 0;
>
> @@ -345,35 +345,35 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
> return rc;
>
> rc = pci_read_config_dword(
> - pdev, d + CXL_DVSEC_RANGE_SIZE_HIGH(i), &temp);
> + pdev, d + PCI_DVSEC_CXL_RANGE_SIZE_HIGH(i), &temp);
> if (rc)
> return rc;
>
> size = (u64)temp << 32;
>
> rc = pci_read_config_dword(
> - pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(i), &temp);
> + pdev, d + PCI_DVSEC_CXL_RANGE_SIZE_LOW(i), &temp);
> if (rc)
> return rc;
>
> - size |= temp & CXL_DVSEC_MEM_SIZE_LOW_MASK;
> + size |= temp & PCI_DVSEC_CXL_MEM_SIZE_LOW_MASK;
> if (!size) {
> continue;
> }
>
> rc = pci_read_config_dword(
> - pdev, d + CXL_DVSEC_RANGE_BASE_HIGH(i), &temp);
> + pdev, d + PCI_DVSEC_CXL_RANGE_BASE_HIGH(i), &temp);
> if (rc)
> return rc;
>
> base = (u64)temp << 32;
>
> rc = pci_read_config_dword(
> - pdev, d + CXL_DVSEC_RANGE_BASE_LOW(i), &temp);
> + pdev, d + PCI_DVSEC_CXL_RANGE_BASE_LOW(i), &temp);
> if (rc)
> return rc;
>
> - base |= temp & CXL_DVSEC_MEM_BASE_LOW_MASK;
> + base |= temp & PCI_DVSEC_CXL_MEM_BASE_LOW_MASK;
>
> info->dvsec_range[ranges++] = (struct range) {
> .start = base,
> @@ -781,7 +781,7 @@ u16 cxl_gpf_get_dvsec(struct device *dev)
> is_port = false;
>
> dvsec = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_CXL,
> - is_port ? CXL_DVSEC_PORT_GPF : CXL_DVSEC_DEVICE_GPF);
> + is_port ? PCI_DVSEC_CXL_PORT_GPF : PCI_DVSEC_CXL_DEVICE_GPF);
> if (!dvsec)
> dev_warn(dev, "%s GPF DVSEC not present\n",
> is_port ? "Port" : "Device");
> @@ -797,14 +797,14 @@ static int update_gpf_port_dvsec(struct pci_dev *pdev, int dvsec, int phase)
>
> switch (phase) {
> case 1:
> - offset = CXL_DVSEC_PORT_GPF_PHASE_1_CONTROL_OFFSET;
> - base = CXL_DVSEC_PORT_GPF_PHASE_1_TMO_BASE_MASK;
> - scale = CXL_DVSEC_PORT_GPF_PHASE_1_TMO_SCALE_MASK;
> + offset = PCI_DVSEC_CXL_PORT_GPF_PHASE_1_CONTROL_OFFSET;
> + base = PCI_DVSEC_CXL_PORT_GPF_PHASE_1_TMO_BASE_MASK;
> + scale = PCI_DVSEC_CXL_PORT_GPF_PHASE_1_TMO_SCALE_MASK;
> break;
> case 2:
> - offset = CXL_DVSEC_PORT_GPF_PHASE_2_CONTROL_OFFSET;
> - base = CXL_DVSEC_PORT_GPF_PHASE_2_TMO_BASE_MASK;
> - scale = CXL_DVSEC_PORT_GPF_PHASE_2_TMO_SCALE_MASK;
> + offset = PCI_DVSEC_CXL_PORT_GPF_PHASE_2_CONTROL_OFFSET;
> + base = PCI_DVSEC_CXL_PORT_GPF_PHASE_2_TMO_BASE_MASK;
> + scale = PCI_DVSEC_CXL_PORT_GPF_PHASE_2_TMO_SCALE_MASK;
> break;
> default:
> return -EINVAL;
> diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
> index 5ca7b0eed568..fb70ffbba72d 100644
> --- a/drivers/cxl/core/regs.c
> +++ b/drivers/cxl/core/regs.c
> @@ -271,10 +271,10 @@ EXPORT_SYMBOL_NS_GPL(cxl_map_device_regs, "CXL");
> static bool cxl_decode_regblock(struct pci_dev *pdev, u32 reg_lo, u32 reg_hi,
> struct cxl_register_map *map)
> {
> - u8 reg_type = FIELD_GET(CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK, reg_lo);
> - int bar = FIELD_GET(CXL_DVSEC_REG_LOCATOR_BIR_MASK, reg_lo);
> + u8 reg_type = FIELD_GET(PCI_DVSEC_CXL_REG_LOCATOR_BLOCK_ID_MASK, reg_lo);
> + int bar = FIELD_GET(PCI_DVSEC_CXL_REG_LOCATOR_BIR_MASK, reg_lo);
> u64 offset = ((u64)reg_hi << 32) |
> - (reg_lo & CXL_DVSEC_REG_LOCATOR_BLOCK_OFF_LOW_MASK);
> + (reg_lo & PCI_DVSEC_CXL_REG_LOCATOR_BLOCK_OFF_LOW_MASK);
>
> if (offset > pci_resource_len(pdev, bar)) {
> dev_warn(&pdev->dev,
> @@ -311,15 +311,15 @@ static int __cxl_find_regblock_instance(struct pci_dev *pdev, enum cxl_regloc_ty
> };
>
> regloc = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_CXL,
> - CXL_DVSEC_REG_LOCATOR);
> + PCI_DVSEC_CXL_REG_LOCATOR);
> if (!regloc)
> return -ENXIO;
>
> pci_read_config_dword(pdev, regloc + PCI_DVSEC_HEADER1, ®loc_size);
> regloc_size = FIELD_GET(PCI_DVSEC_HEADER1_LENGTH_MASK, regloc_size);
>
> - regloc += CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET;
> - regblocks = (regloc_size - CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET) / 8;
> + regloc += PCI_DVSEC_CXL_REG_LOCATOR_BLOCK1_OFFSET;
> + regblocks = (regloc_size - PCI_DVSEC_CXL_REG_LOCATOR_BLOCK1_OFFSET) / 8;
>
> for (i = 0; i < regblocks; i++, regloc += 8) {
> u32 reg_lo, reg_hi;
> diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h
> index 3959fa7e2ead..ad24d81e9eaa 100644
> --- a/drivers/cxl/cxlpci.h
> +++ b/drivers/cxl/cxlpci.h
> @@ -7,59 +7,6 @@
>
> #define CXL_MEMORY_PROGIF 0x10
>
> -/*
> - * See section 8.1 Configuration Space Registers in the CXL 2.0
> - * Specification. Names are taken straight from the specification with "CXL" and
> - * "DVSEC" redundancies removed. When obvious, abbreviations may be used.
> - */
> -#define PCI_DVSEC_HEADER1_LENGTH_MASK GENMASK(31, 20)
> -
> -/* CXL 2.0 8.1.3: PCIe DVSEC for CXL Device */
> -#define CXL_DVSEC_PCIE_DEVICE 0
> -#define CXL_DVSEC_CAP_OFFSET 0xA
> -#define CXL_DVSEC_MEM_CAPABLE BIT(2)
> -#define CXL_DVSEC_HDM_COUNT_MASK GENMASK(5, 4)
> -#define CXL_DVSEC_CTRL_OFFSET 0xC
> -#define CXL_DVSEC_MEM_ENABLE BIT(2)
> -#define CXL_DVSEC_RANGE_SIZE_HIGH(i) (0x18 + (i * 0x10))
> -#define CXL_DVSEC_RANGE_SIZE_LOW(i) (0x1C + (i * 0x10))
> -#define CXL_DVSEC_MEM_INFO_VALID BIT(0)
> -#define CXL_DVSEC_MEM_ACTIVE BIT(1)
> -#define CXL_DVSEC_MEM_SIZE_LOW_MASK GENMASK(31, 28)
> -#define CXL_DVSEC_RANGE_BASE_HIGH(i) (0x20 + (i * 0x10))
> -#define CXL_DVSEC_RANGE_BASE_LOW(i) (0x24 + (i * 0x10))
> -#define CXL_DVSEC_MEM_BASE_LOW_MASK GENMASK(31, 28)
> -
> -#define CXL_DVSEC_RANGE_MAX 2
> -
> -/* CXL 2.0 8.1.4: Non-CXL Function Map DVSEC */
> -#define CXL_DVSEC_FUNCTION_MAP 2
> -
> -/* CXL 2.0 8.1.5: CXL 2.0 Extensions DVSEC for Ports */
> -#define CXL_DVSEC_PORT_EXTENSIONS 3
> -
> -/* CXL 2.0 8.1.6: GPF DVSEC for CXL Port */
> -#define CXL_DVSEC_PORT_GPF 4
> -#define CXL_DVSEC_PORT_GPF_PHASE_1_CONTROL_OFFSET 0x0C
> -#define CXL_DVSEC_PORT_GPF_PHASE_1_TMO_BASE_MASK GENMASK(3, 0)
> -#define CXL_DVSEC_PORT_GPF_PHASE_1_TMO_SCALE_MASK GENMASK(11, 8)
> -#define CXL_DVSEC_PORT_GPF_PHASE_2_CONTROL_OFFSET 0xE
> -#define CXL_DVSEC_PORT_GPF_PHASE_2_TMO_BASE_MASK GENMASK(3, 0)
> -#define CXL_DVSEC_PORT_GPF_PHASE_2_TMO_SCALE_MASK GENMASK(11, 8)
> -
> -/* CXL 2.0 8.1.7: GPF DVSEC for CXL Device */
> -#define CXL_DVSEC_DEVICE_GPF 5
> -
> -/* CXL 2.0 8.1.8: PCIe DVSEC for Flex Bus Port */
> -#define CXL_DVSEC_PCIE_FLEXBUS_PORT 7
> -
> -/* CXL 2.0 8.1.9: Register Locator DVSEC */
> -#define CXL_DVSEC_REG_LOCATOR 8
> -#define CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET 0xC
> -#define CXL_DVSEC_REG_LOCATOR_BIR_MASK GENMASK(2, 0)
> -#define CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK GENMASK(15, 8)
> -#define CXL_DVSEC_REG_LOCATOR_BLOCK_OFF_LOW_MASK GENMASK(31, 16)
> -
> /*
> * NOTE: Currently all the functions which are enabled for CXL require their
> * vectors to be in the first 16. Use this as the default max.
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index bd100ac31672..bd95be1f3d5c 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -933,7 +933,7 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> cxlds->rcd = is_cxl_restricted(pdev);
> cxlds->serial = pci_get_dsn(pdev);
> cxlds->cxl_dvsec = pci_find_dvsec_capability(
> - pdev, PCI_VENDOR_ID_CXL, CXL_DVSEC_PCIE_DEVICE);
> + pdev, PCI_VENDOR_ID_CXL, PCI_DVSEC_CXL_DEVICE);
> if (!cxlds->cxl_dvsec)
> dev_warn(&pdev->dev,
> "Device DVSEC not present, skip CXL.mem init\n");
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 9e42090fb108..d775ed37a79b 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -5031,7 +5031,7 @@ static int pci_dev_reset_slot_function(struct pci_dev *dev, bool probe)
> static u16 cxl_port_dvsec(struct pci_dev *dev)
> {
> return pci_find_dvsec_capability(dev, PCI_VENDOR_ID_CXL,
> - PCI_DVSEC_CXL_PORT);
> + PCI_DVSEC_CXL_PORT_EXT);
> }
>
> static bool cxl_sbr_masked(struct pci_dev *dev)
> @@ -5043,7 +5043,9 @@ static bool cxl_sbr_masked(struct pci_dev *dev)
> if (!dvsec)
> return false;
>
> - rc = pci_read_config_word(dev, dvsec + PCI_DVSEC_CXL_PORT_CTL, ®);
> + rc = pci_read_config_word(dev,
> + dvsec + PCI_DVSEC_CXL_PORT_EXT_CTL_OFFSET,
> + ®);
> if (rc || PCI_POSSIBLE_ERROR(reg))
> return false;
>
> @@ -5052,7 +5054,7 @@ static bool cxl_sbr_masked(struct pci_dev *dev)
> * bit in Bridge Control has no effect. When 1, the Port generates
> * hot reset when the SBR bit is set to 1.
> */
> - if (reg & PCI_DVSEC_CXL_PORT_CTL_UNMASK_SBR)
> + if (reg & PCI_DVSEC_CXL_PORT_EXT_CTL_UNMASK_SBR)
> return false;
>
> return true;
> @@ -5097,22 +5099,22 @@ static int cxl_reset_bus_function(struct pci_dev *dev, bool probe)
> if (probe)
> return 0;
>
> - rc = pci_read_config_word(bridge, dvsec + PCI_DVSEC_CXL_PORT_CTL, ®);
> + rc = pci_read_config_word(bridge, dvsec + PCI_DVSEC_CXL_PORT_EXT_CTL_OFFSET, ®);
> if (rc)
> return -ENOTTY;
>
> - if (reg & PCI_DVSEC_CXL_PORT_CTL_UNMASK_SBR) {
> + if (reg & PCI_DVSEC_CXL_PORT_EXT_CTL_UNMASK_SBR) {
> val = reg;
> } else {
> - val = reg | PCI_DVSEC_CXL_PORT_CTL_UNMASK_SBR;
> - pci_write_config_word(bridge, dvsec + PCI_DVSEC_CXL_PORT_CTL,
> + val = reg | PCI_DVSEC_CXL_PORT_EXT_CTL_UNMASK_SBR;
> + pci_write_config_word(bridge, dvsec + PCI_DVSEC_CXL_PORT_EXT_CTL_OFFSET,
> val);
> }
>
> rc = pci_reset_bus_function(dev, probe);
>
> if (reg != val)
> - pci_write_config_word(bridge, dvsec + PCI_DVSEC_CXL_PORT_CTL,
> + pci_write_config_word(bridge, dvsec + PCI_DVSEC_CXL_PORT_EXT_CTL_OFFSET,
> reg);
>
> return rc;
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index a3a3e942dedf..b03244d55aea 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -1225,9 +1225,61 @@
> /* Deprecated old name, replaced with PCI_DOE_DATA_OBJECT_DISC_RSP_3_TYPE */
> #define PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL PCI_DOE_DATA_OBJECT_DISC_RSP_3_TYPE
>
> -/* Compute Express Link (CXL r3.1, sec 8.1.5) */
> -#define PCI_DVSEC_CXL_PORT 3
> -#define PCI_DVSEC_CXL_PORT_CTL 0x0c
> -#define PCI_DVSEC_CXL_PORT_CTL_UNMASK_SBR 0x00000001
> +/* Compute Express Link (CXL r3.2, sec 8.1)
> + *
> + * Note that CXL DVSEC id 3 and 7 to be ignored when the CXL link state
> + * is "disconnected" (CXL r3.2, sec 9.12.3). Re-enumerate these
> + * registers on downstream link-up events.
> + */
> +
> +#define PCI_DVSEC_HEADER1_LENGTH_MASK GENMASK(31, 20)
> +
> +/* CXL 3.2 8.1.3: PCIe DVSEC for CXL Device */
> +#define PCI_DVSEC_CXL_DEVICE 0
> +#define PCI_DVSEC_CXL_CAP_OFFSET 0xA
> +#define PCI_DVSEC_CXL_MEM_CAPABLE BIT(2)
> +#define PCI_DVSEC_CXL_HDM_COUNT_MASK GENMASK(5, 4)
> +#define PCI_DVSEC_CXL_CTRL_OFFSET 0xC
> +#define PCI_DVSEC_CXL_MEM_ENABLE BIT(2)
> +#define PCI_DVSEC_CXL_RANGE_SIZE_HIGH(i) (0x18 + (i * 0x10))
> +#define PCI_DVSEC_CXL_RANGE_SIZE_LOW(i) (0x1C + (i * 0x10))
> +#define PCI_DVSEC_CXL_MEM_INFO_VALID BIT(0)
> +#define PCI_DVSEC_CXL_MEM_ACTIVE BIT(1)
> +#define PCI_DVSEC_CXL_MEM_SIZE_LOW_MASK GENMASK(31, 28)
> +#define PCI_DVSEC_CXL_RANGE_BASE_HIGH(i) (0x20 + (i * 0x10))
> +#define PCI_DVSEC_CXL_RANGE_BASE_LOW(i) (0x24 + (i * 0x10))
> +#define PCI_DVSEC_CXL_MEM_BASE_LOW_MASK GENMASK(31, 28)
> +
> +#define PCI_DVSEC_CXL_RANGE_MAX 2
> +
> +/* CXL 3.2 8.1.4: Non-CXL Function Map DVSEC */
> +#define PCI_DVSEC_CXL_FUNCTION_MAP 2
> +
> +/* CXL 3.2 8.1.5: Extensions DVSEC for Ports */
> +#define PCI_DVSEC_CXL_PORT_EXT 3
> +#define PCI_DVSEC_CXL_PORT_EXT_CTL_OFFSET 0x0c
> +#define PCI_DVSEC_CXL_PORT_EXT_CTL_UNMASK_SBR 0x00000001
> +
> +/* CXL 3.2 8.1.6: GPF DVSEC for CXL Port */
> +#define PCI_DVSEC_CXL_PORT_GPF 4
> +#define PCI_DVSEC_CXL_PORT_GPF_PHASE_1_CONTROL_OFFSET 0x0C
> +#define PCI_DVSEC_CXL_PORT_GPF_PHASE_1_TMO_BASE_MASK GENMASK(3, 0)
> +#define PCI_DVSEC_CXL_PORT_GPF_PHASE_1_TMO_SCALE_MASK GENMASK(11, 8)
> +#define PCI_DVSEC_CXL_PORT_GPF_PHASE_2_CONTROL_OFFSET 0xE
> +#define PCI_DVSEC_CXL_PORT_GPF_PHASE_2_TMO_BASE_MASK GENMASK(3, 0)
> +#define PCI_DVSEC_CXL_PORT_GPF_PHASE_2_TMO_SCALE_MASK GENMASK(11, 8)
> +
> +/* CXL 3.2 8.1.7: GPF DVSEC for CXL Device */
> +#define PCI_DVSEC_CXL_DEVICE_GPF 5
> +
> +/* CXL 3.2 8.1.8: PCIe DVSEC for Flex Bus Port */
> +#define PCI_DVSEC_CXL_FLEXBUS_PORT 7
> +
> +/* CXL 3.2 8.1.9: Register Locator DVSEC */
> +#define PCI_DVSEC_CXL_REG_LOCATOR 8
> +#define PCI_DVSEC_CXL_REG_LOCATOR_BLOCK1_OFFSET 0xC
> +#define PCI_DVSEC_CXL_REG_LOCATOR_BIR_MASK GENMASK(2, 0)
> +#define PCI_DVSEC_CXL_REG_LOCATOR_BLOCK_ID_MASK GENMASK(15, 8)
> +#define PCI_DVSEC_CXL_REG_LOCATOR_BLOCK_OFF_LOW_MASK GENMASK(31, 16)
>
> #endif /* LINUX_PCI_REGS_H */
