On Wed, Aug 27, 2025 at 06:32:30PM GMT, Bartosz Golaszewski wrote:
> On Tue, Aug 19, 2025 at 9:15 AM Manivannan Sadhasivam via B4 Relay
> <devnull+manivannan.sadhasivam.oss.qualcomm.com@xxxxxxxxxx> wrote:
> >
> > From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>
> >
> > As per PCIe spec r6.0, sec 6.6.1, PERST# is an auxiliary signal provided by
> > the system to a component as a Fundamental Reset. This signal if available,
> > should conform to the rules defined by the electromechanical form factor
> > specifications like PCIe CEM spec r4.0, sec 2.2.
> >
> > Since pwrctrl driver is meant to control the power supplies, it should also
> > control the PERST# signal if available. But traditionally, the host bridge
> > (controller) drivers are the ones parsing and controlling the PERST#
> > signal. They also sometimes need to assert PERST# during their own hardware
> > initialization. So it is not possible to move the PERST# control away from
> > the controller drivers and it must be shared logically.
> >
> > Hence, add a new callback 'pci_host_bridge::toggle_perst', that allows the
> > pwrctrl core to toggle PERST# with the help of the controller drivers. But
> > care must be taken care by the controller drivers to not deassert the
> > PERST# signal if this callback is populated.
> >
> > This callback if available, will be called by the pwrctrl core during the
> > device power up and power down scenarios. Controller drivers should
> > identify the device using the 'struct device_node' passed during the
> > callback and toggle PERST# accordingly.
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>
> > ---
> > drivers/pci/pwrctrl/core.c | 27 +++++++++++++++++++++++++++
> > include/linux/pci.h | 1 +
> > 2 files changed, 28 insertions(+)
> >
> > diff --git a/drivers/pci/pwrctrl/core.c b/drivers/pci/pwrctrl/core.c
> > index 6bdbfed584d6d79ce28ba9e384a596b065ca69a4..8a26f432436d064acb7ebbbc9ce8fc339909fbe9 100644
> > --- a/drivers/pci/pwrctrl/core.c
> > +++ b/drivers/pci/pwrctrl/core.c
> > @@ -6,6 +6,7 @@
> > #include <linux/device.h>
> > #include <linux/export.h>
> > #include <linux/kernel.h>
> > +#include <linux/of.h>
> > #include <linux/pci.h>
> > #include <linux/pci-pwrctrl.h>
> > #include <linux/property.h>
> > @@ -61,6 +62,28 @@ void pci_pwrctrl_init(struct pci_pwrctrl *pwrctrl, struct device *dev)
> > }
> > EXPORT_SYMBOL_GPL(pci_pwrctrl_init);
> >
> > +static void pci_pwrctrl_perst_deassert(struct pci_pwrctrl *pwrctrl)
> > +{
> > + struct pci_host_bridge *host_bridge = to_pci_host_bridge(pwrctrl->dev->parent);
> > + struct device_node *np = dev_of_node(pwrctrl->dev);
> > +
> > + if (!host_bridge->toggle_perst)
> > + return;
> > +
> > + host_bridge->toggle_perst(host_bridge, np, false);
> > +}
> > +
> > +static void pci_pwrctrl_perst_assert(struct pci_pwrctrl *pwrctrl)
> > +{
> > + struct pci_host_bridge *host_bridge = to_pci_host_bridge(pwrctrl->dev->parent);
> > + struct device_node *np = dev_of_node(pwrctrl->dev);
> > +
> > + if (!host_bridge->toggle_perst)
> > + return;
> > +
> > + host_bridge->toggle_perst(host_bridge, np, true);
> > +}
> > +
> > /**
> > * pci_pwrctrl_device_set_ready() - Notify the pwrctrl subsystem that the PCI
> > * device is powered-up and ready to be detected.
> > @@ -82,6 +105,8 @@ int pci_pwrctrl_device_set_ready(struct pci_pwrctrl *pwrctrl)
> > if (!pwrctrl->dev)
> > return -ENODEV;
> >
> > + pci_pwrctrl_perst_deassert(pwrctrl);
> > +
> > pwrctrl->nb.notifier_call = pci_pwrctrl_notify;
> > ret = bus_register_notifier(&pci_bus_type, &pwrctrl->nb);
> > if (ret)
> > @@ -103,6 +128,8 @@ void pci_pwrctrl_device_unset_ready(struct pci_pwrctrl *pwrctrl)
> > {
> > cancel_work_sync(&pwrctrl->work);
> >
> > + pci_pwrctrl_perst_assert(pwrctrl);
> > +
> > /*
> > * We don't have to delete the link here. Typically, this function
> > * is only called when the power control device is being detached. If
> > diff --git a/include/linux/pci.h b/include/linux/pci.h
> > index 59876de13860dbe50ee6c207cd57e54f51a11079..9eeee84d550bb9f15a90b5db9da03fccef8097ee 100644
> > --- a/include/linux/pci.h
> > +++ b/include/linux/pci.h
> > @@ -605,6 +605,7 @@ struct pci_host_bridge {
> > void (*release_fn)(struct pci_host_bridge *);
> > int (*enable_device)(struct pci_host_bridge *bridge, struct pci_dev *dev);
> > void (*disable_device)(struct pci_host_bridge *bridge, struct pci_dev *dev);
> > + void (*toggle_perst)(struct pci_host_bridge *bridge, struct device_node *np, bool assert);
>
> Shouldn't this be wrapped in an #if IS_ENABLED(PCI_PWRCTL)?
>
Ack.
- Mani
--
மணிவண்ணன் சதாசிவம்
