Re: [PATCH v6] PCI/PM: Skip resuming to D0 if disconnected

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 08, 2025 at 04:29:32PM -0500, Mario Limonciello (kernel.org) wrote:
> On 9/8/2025 4:03 PM, Bjorn Helgaas wrote:
> > On Mon, Aug 11, 2025 at 11:35:10AM -0500, Mario Limonciello (AMD) wrote:
> > > When a USB4 dock is unplugged the PCIe bridge it's connected to will
> > > issue a "Link Down" and "Card not detected event". The PCI core will
> > > treat this as a surprise hotplug event and unconfigure all downstream
> > > devices. This involves setting the device error state to
> > > `pci_channel_io_perm_failure` which pci_dev_is_disconnected() will check.
> > 
> > There's nothing special about USB4 here, right?  I guess the same
> > happens with any surprise hotplug remove?
> 
> Correct.
> 
> > pciehp_unconfigure_device() does the pci_dev_set_io_state(dev,
> > pci_channel_io_perm_failure) part on everything that got removed, so
> > that part is pretty straightforward.
> > 
> > > It doesn't make sense to runtime resume disconnected devices to D0 and
> > > report the (expected) error, so bail early.
> > 
> > Can you include a hint about where the runtime resume happens?  It
> > seems unintuitive to power up removed devices.
> 
> Here's the whole trace.  Basically as part of the base driver release the
> device is runtime resumed.
> 
> Do you want me to respin and try to incorporate a sentence or two into the
> commit text?

Yes, please.  I guess maybe we are basically here inside the
pm_runtime_get_sync() here?

  pciehp_unconfigure_device
    pci_stop_and_remove_bus_device
      device_release_driver
        device_remove
          pci_device_remove
            pm_runtime_get_sync    <--
              drv->remove

I guess it's the pm_runtime_get_sync() that eventually lands us in
pci_power_up()?

And I guess we can't really check whether the device is already gone
in pci_device_remove() because we still want to run the driver
.remove() method and other things to clean up.

I suppose everything we call just needs to be aware that its device
may be already gone?

> [   37.237841] dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
> [   37.237858] pci_power_up.cold+0x86/0xc1
> [   37.237867] ? __pfx_pci_power_up (drivers/pci/pci.c:1360)
> [   37.237876] ? prb_commit (kernel/printk/printk_ringbuffer.c:1748)
> [   37.237883] ? __pfx_prb_read_valid
> (kernel/printk/printk_ringbuffer.c:2184)
> [   37.237889] pci_pm_power_up_and_verify_state (drivers/pci/pci.c:1146
> drivers/pci/pci.c:1201 drivers/pci/pci.c:3206)
> [   37.237897] ? __pfx_pci_pm_power_up_and_verify_state
> (drivers/pci/pci.c:3204)
> [   37.237903] ? __pfx_rpm_resume (drivers/base/power/runtime.c:785)
> [   37.237911] pci_pm_runtime_resume (drivers/pci/pci-driver.c:561
> drivers/pci/pci-driver.c:1349)
> [   37.237918] __rpm_callback (drivers/base/power/runtime.c:406)
> [   37.237923] ? __pfx__raw_spin_lock (kernel/locking/spinlock.c:153)
> [   37.237932] rpm_callback (drivers/base/power/runtime.c:444)
> [   37.237936] ? __pfx_pci_pm_runtime_resume (drivers/pci/pci-driver.c:1338)
> [   37.237941] rpm_resume (drivers/base/power/runtime.c:943)
> [   37.237946] ? __pfx_rpm_resume (drivers/base/power/runtime.c:785)
> [   37.237951] ? _raw_spin_lock_irqsave (./include/linux/instrumented.h:96
> ./include/linux/atomic/atomic-instrumented.h:1301
> ./include/asm-generic/qspinlock.h:111 ./include/linux/spinlock.h:187
> ./include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162)
> [   37.237954] ? __pfx__raw_spin_lock_irqsave
> (kernel/locking/spinlock.c:161)
> [   37.237958] ? mutex_lock (./include/linux/instrumented.h:96
> ./include/linux/atomic/atomic-instrumented.h:4457 kernel/locking/mutex.c:157
> kernel/locking/mutex.c:273)
> [   37.237965] __pm_runtime_resume (drivers/base/power/runtime.c:1192)
> [   37.237971] device_release_driver_internal (drivers/base/dd.c:1111
> (discriminator 1) drivers/base/dd.c:1252 (discriminator 1)
> drivers/base/dd.c:1297 (discriminator 1))
> [   37.237978] ? pci_pme_active (drivers/pci/pci.c:2521)
> [   37.237984] pci_stop_bus_device (drivers/pci/remove.c:44
> drivers/pci/remove.c:107)
> [   37.237992] pci_stop_bus_device (drivers/pci/remove.c:102 (discriminator
> 1))
> [   37.237997] pci_stop_and_remove_bus_device (drivers/pci/remove.c:142)
> [   37.238003] pciehp_unconfigure_device
> (drivers/pci/hotplug/pciehp_pci.c:124)
> [   37.238011] ? __pfx_pciehp_unconfigure_device
> (drivers/pci/hotplug/pciehp_pci.c:96)
> [   37.238017] ? _dev_info (drivers/base/core.c:4983)
> [   37.238025] pciehp_disable_slot (drivers/pci/hotplug/pciehp_ctrl.c:115
> drivers/pci/hotplug/pciehp_ctrl.c:355 drivers/pci/hotplug/pciehp_ctrl.c:364)
> [   37.238030] ? __pfx_pciehp_disable_slot
> (drivers/pci/hotplug/pciehp_ctrl.c:360)
> [   37.238035] ? __pfx_mutex_unlock (kernel/locking/mutex.c:531)
> [   37.238039] ? mutex_lock_interruptible (kernel/locking/mutex.c:992)
> [   37.238047] pciehp_handle_presence_or_link_change
> (drivers/pci/hotplug/pciehp_ctrl.c:253)
> [   37.238054] ? down_read (kernel/locking/rwsem.c:174
> kernel/locking/rwsem.c:182 kernel/locking/rwsem.c:257
> kernel/locking/rwsem.c:249 kernel/locking/rwsem.c:1260
> kernel/locking/rwsem.c:1274 kernel/locking/rwsem.c:1539)
> [   37.238061] ? __pfx_pciehp_handle_presence_or_link_change
> (drivers/pci/hotplug/pciehp_ctrl.c:232)
> [   37.238068] ? __pfx_down_read (kernel/locking/rwsem.c:1535)
> [   37.238074] ? __pfx_pciehp_ist (drivers/pci/hotplug/pciehp_hpc.c:728)
> [   37.238079] pciehp_ist (drivers/pci/hotplug/pciehp_hpc.c:788)
> [   37.238085] ? __pfx_pciehp_ist (drivers/pci/hotplug/pciehp_hpc.c:728)
> [   37.238091] irq_thread_fn (kernel/irq/manage.c:1131)
> [   37.238098] irq_thread (./arch/x86/include/asm/bitops.h:206
> ./arch/x86/include/asm/bitops.h:238
> ./include/asm-generic/bitops/instrumented-non-atomic.h:142
> kernel/irq/manage.c:1244)
> [   37.238104] ? __pfx_irq_thread_fn (kernel/irq/manage.c:1130)
> [   37.238110] ? __pfx_irq_thread (kernel/irq/manage.c:1233)
> [   37.238115] ? __pfx_irq_thread_dtor (kernel/irq/manage.c:1167)
> [   37.238123] ? __kthread_parkme (./arch/x86/include/asm/bitops.h:206
> ./arch/x86/include/asm/bitops.h:238
> ./include/asm-generic/bitops/instrumented-non-atomic.h:142
> kernel/kthread.c:290)
> [   37.238130] ? __pfx_irq_thread (kernel/irq/manage.c:1233)
> [   37.238136] ? __pfx_irq_thread (kernel/irq/manage.c:1233)
> [   37.238141] kthread (kernel/kthread.c:463)
> [   37.238147] ? __pfx_kthread (kernel/kthread.c:412)
> [   37.238153] ? finish_task_switch.isra.0
> (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:119
> kernel/sched/sched.h:1531 kernel/sched/core.c:5105 kernel/sched/core.c:5223)
> [   37.238161] ? __pfx_kthread (kernel/kthread.c:412)
> [   37.238166] ret_from_fork (arch/x86/kernel/process.c:154)
> [   37.238175] ? __pfx_kthread (kernel/kthread.c:412)
> [   37.238180] ? __pfx_kthread (kernel/kthread.c:412)
> [   37.238184] ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
> [   37.238192]  </TASK>
> 
> > 
> > > Suggested-by: Lukas Wunner <lukas@xxxxxxxxx>
> > > Reviewed-by: Lukas Wunner <lukas@xxxxxxxxx>
> > > Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
> > > Acked-by: Rafael J. Wysocki <rafael@xxxxxxxxxx>
> > > Signed-off-by: Mario Limonciello (AMD) <superm1@xxxxxxxxxx>
> > > ---
> > > v6:
> > >   * rebase on v6.17-rc1
> > > v5:
> > >   * Pick up tags, rebase on linux-next
> > >   * https://lore.kernel.org/linux-pci/20250709205948.3888045-1-superm1@xxxxxxxxxx/T/#mbd784f786c50a3d1b5ab1833520995c01eae2fd2
> > > ---
> > >   drivers/pci/pci.c | 5 +++++
> > >   1 file changed, 5 insertions(+)
> > > 
> > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > > index b0f4d98036cdd..036511f5b2625 100644
> > > --- a/drivers/pci/pci.c
> > > +++ b/drivers/pci/pci.c
> > > @@ -1374,6 +1374,11 @@ int pci_power_up(struct pci_dev *dev)
> > >   		return -EIO;
> > >   	}
> > > +	if (pci_dev_is_disconnected(dev)) {
> > > +		dev->current_state = PCI_D3cold;
> > > +		return -EIO;
> > > +	}
> > > +
> > >   	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
> > >   	if (PCI_POSSIBLE_ERROR(pmcsr)) {
> > >   		pci_err(dev, "Unable to change power state from %s to D0, device inaccessible\n",
> > > 
> > > base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585
> > > -- 
> > > 2.43.0
> > > 
> 




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux