On 2025/8/7 15:09, Richard Zhu wrote:
EXTERNAL EMAIL
Some PCI host bridges have limitation that AER/PME can't work over MSI.
Vendors route the AER/PME via the dedicated SPI interrupter which is
only handled by the controller driver.
Because that aer and pme had been defined in the snps,dw-pcie.yaml
document. Fetch the vendor specific AER/PME interrupters if they are
defined in the fdt file by generic bridge->get_service_irqs hook.
Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
---
.../pci/controller/dwc/pcie-designware-host.c | 32 +++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 906277f9ffaf7..9393dc99df81f 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -13,11 +13,13 @@
#include <linux/irqdomain.h>
#include <linux/msi.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <linux/pci_regs.h>
#include <linux/platform_device.h>
#include "../../pci.h"
+#include "../../pcie/portdrv.h"
#include "pcie-designware.h"
static struct pci_ops dw_pcie_ops;
@@ -461,6 +463,35 @@ static int dw_pcie_host_get_resources(struct dw_pcie_rp *pp)
return 0;
}
+static int dw_pcie_get_service_irqs(struct pci_host_bridge *bridge,
+ int *irqs, int mask)
+{
+ struct device *dev = bridge->dev.parent;
+ struct device_node *np = dev->of_node;
+ int ret, count = 0;
+
+ if (!np)
+ return 0;
+
+ if (mask & PCIE_PORT_SERVICE_AER) {
+ ret = of_irq_get_byname(np, "aer");
+ if (ret > 0) {
+ irqs[PCIE_PORT_SERVICE_AER_SHIFT] = ret;
+ count++;
+ }
+ }
+
+ if (mask & PCIE_PORT_SERVICE_PME) {
+ ret = of_irq_get_byname(np, "pme");
+ if (ret > 0) {
+ irqs[PCIE_PORT_SERVICE_PME_SHIFT] = ret;
+ count++;
+ }
+ }
+
Hi Richard,
As far as I know, some SoCs directly use the misc SPI interrupt derived
from Synopsys PCIe IP. This includes PME, AER and other interrupts. So
here, can we assign the interrupt number ourselves?
Also, whether to trigger the AER/PME interrupt in a similar way.
(generic_handle_domain_irq)
Because there may be a misc SPI interrupt that requires a clear related
state, what is referred to here is not the AER/PME state.
Best regards,
Hans
+ return count;
+}
+
int dw_pcie_host_init(struct dw_pcie_rp *pp)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -476,6 +507,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
return -ENOMEM;
pp->bridge = bridge;
+ pp->bridge->get_service_irqs = dw_pcie_get_service_irqs;
ret = dw_pcie_host_get_resources(pp);
if (ret)
--
2.37.1
