Add a single sysfs read-only interface for reading PCIe device serial
numbers from userspace, using the same hexadecimal 1-byte dashed
formatting as lspci serial number capability output:
more /sys/devices/pci0000:c0/0000:c0:01.1/0000:c1:00.0/0000:c2:1f.0/0000:cc:00.0/device_serial_number
00-80-ee-00-00-00-41-80
If a device doesn't support the serial number capability, the
device_serial_number sysfs attribute will not be visible.
Comparing serial number format to lspci output:
sudo lspci -vvv -s cc:00.0
cc:00.0 Serial Attached SCSI controller: Broadcom / LSI PCIe Switch management endpoint (rev b0)
Subsystem: Broadcom / LSI Device 0144
...
Capabilities: [100 v1] Device Serial Number 00-80-ee-00-00-00-41-80
...
This PCIe device sysfs attribute eliminates the need for parsing lspci
output (e.g. regexp) for userspace applications that utilize serial
numbers.
Matthew Wood (1):
PCI/sysfs: Expose PCIe device serial number
drivers/pci/pci-sysfs.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
--
2.50.0
