> -----Original Message-----
> From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
> Sent: 2025年7月8日 3:34
> To: Hongxing Zhu <hongxing.zhu@xxxxxxx>
> Cc: Frank Li <frank.li@xxxxxxx>; l.stach@xxxxxxxxxxxxxx;
> lpieralisi@xxxxxxxxxx; kwilczynski@xxxxxxxxxx; mani@xxxxxxxxxx;
> robh@xxxxxxxxxx; bhelgaas@xxxxxxxxxx; shawnguo@xxxxxxxxxx;
> s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> linux-pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> imx@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v2] PCI: imx6: Correct the epc_features of i.MX8M chips
>
> On Tue, Jun 17, 2025 at 03:34:41PM +0800, Richard Zhu wrote:
> > i.MX8MQ PCIes have three 64-bit BAR0/2/4 capable and programmable
> BARs.
> > But i.MX8MM and i.MX8MP PCIes only have BAR0/BAR2 64bit
> programmable
> > BARs, and one 256 bytes size fixed BAR4.
> >
> > Correct the epc_features for i.MX8MM and i.MX8MP PCIes here. i.MX8MQ
> > is the same as i.MX8QXP, so set i.MX8MQ's epc_features to
> > imx8q_pcie_epc_features.
> >
> > Fixes: 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
> > Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
> > Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
>
> "Correct the epc_features" doesn't include any specific information, and it's
> hard to extract the changes for a device from the commit log.
>
> This is really two fixes that should be separated so the commit logs can be
> specific:
Yes, it's right.
Since it's just one line change for i.MX8MQ. So, I combine the changes into
this commit for i.MX8M chips.
Hi Mani:
Since it had been applied, I don't know how to proceed.
Should I separate this commit into two patches, and re-send them again?
Thanks.
Best Regards
Richard Zhu
>
> - For IMX8MQ_EP, use imx8q_pcie_epc_features (64-bit BARs 0, 2, 4)
> instead of imx8m_pcie_epc_features (64-bit BARs 0, 2).
>
> - For IMX8MM_EP and IMX8MP_EP, add fixed 256-byte BAR 4 in
> imx8m_pcie_epc_features.
>
> > ---
> > drivers/pci/controller/dwc/pci-imx6.c | 4 +++-
> > 1 file changed, 3 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> > b/drivers/pci/controller/dwc/pci-imx6.c
> > index 5a38cfaf989b..9754cc6e09b9 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -1385,6 +1385,8 @@ static const struct pci_epc_features
> imx8m_pcie_epc_features = {
> > .msix_capable = false,
> > .bar[BAR_1] = { .type = BAR_RESERVED, },
> > .bar[BAR_3] = { .type = BAR_RESERVED, },
> > + .bar[BAR_4] = { .type = BAR_FIXED, .fixed_size = SZ_256, },
> > + .bar[BAR_5] = { .type = BAR_RESERVED, },
> > .align = SZ_64K,
> > };
> >
> > @@ -1912,7 +1914,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
> > .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > .mode_off[1] = IOMUXC_GPR12,
> > .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> > - .epc_features = &imx8m_pcie_epc_features,
> > + .epc_features = &imx8q_pcie_epc_features,
> > .init_phy = imx8mq_pcie_init_phy,
> > .enable_ref_clk = imx8mm_pcie_enable_ref_clk,
> > },
> > --
> > 2.37.1
> >
