Re: Does dwc/pci-layerscape.c support AER?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 02, 2025 at 04:44:48PM -0700, Brian Norris wrote:
> Hi Frank,
>
> On Wed, Jul 02, 2025 at 07:09:42PM -0400, Frank Li wrote:
> > > Does the AER driver actually work on these platforms?
> ...
> > There are several attempts to upstream customer Aer irq support in past years.
> >
> > For example:
> >   https://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg1161848.html
> >
> > some change port drivers.
> >
> > If you think it is valuable to support customer AER IRQ support, I can restart
> > this work.
>
> Interesting thread. I read through it, but I'm still not convinced about
> one detail:
>
> Are you sure that AER can't possibly work over MSI? Even today, the
> Synopsys manuals say that their integrated MSI receiver "terminate[s]
> inbound MSI requests (received on the RX wire)" and after terminating,
> "an interrupt is signaled locally through the msi_ctrl_int output."
>
> That means that their msi_ctrl_int signal only handles MSI requests from
> downstream functions, and it implies that the default
> drivers/pci/controller/dwc/pcie-designware-host.c
> dw_pcie_msi_domain_info implementation will not actually see MSIs from
> the root port (such as PME and AER). So yes, it *appears* that AER does
> not work over MSI.
>
> But crucially, it does *not* mean that the port will not generate valid
> MSI requests, if you have some kind of logic that will receive it. So
> for instance, I pointed out in another reply that some SoCs choose to
> hook up GIC ITS:
>
>  commit 9c4cd0aef259 ("arm64: dts: qcom: x1e80100: enable GICv3 ITS for
>  PCIe")
>
> """
>     Note that using the GIC ITS on x1e80100 will cause Advanced Error
>     Reporting (AER) interrupts to be received on errors unlike when using
>     the internal MSI controller. Consequently, notifications about
>     (correctable) errors may now be logged for errors that previously went
>     unnoticed.
> """
>
> And in fact, your arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi seems
> to be doing the same. I'd be surprised if these port MSIs still don't
> work after that.
>
> OTOH, I do also believe there are SoCs where DWC PCIe is available, but
> there is no external MSI controller, and so that same problem still may
> exist. I may even have such SoCs available...

I saw AER and PME irq registed. But I have not seen irq increased. I am not
sure how to inject an error to test it.

I suppose it go through AER irq line.

Frank

>
> Brian




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux