From: Hans Zhang <hans.zhang@xxxxxxxxxxx>
Add pcie_x*_rc node to support Sky1 PCIe driver based on the
Cadence PCIe core.
Supports Gen1/Gen2/Gen3/Gen4, 1/2/4/8 lane, MSI/MSI-x interrupts
using the ARM GICv3.
Signed-off-by: Hans Zhang <hans.zhang@xxxxxxxxxxx>
Reviewed-by: Peter Chen <peter.chen@xxxxxxxxxxx>
Reviewed-by: Manikandan K Pillai <mpillai@xxxxxxxxxxx>
---
arch/arm64/boot/dts/cix/sky1.dtsi | 150 ++++++++++++++++++++++++++++++
1 file changed, 150 insertions(+)
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
index 9c723917d8ca..1dac0e8d5fc1 100644
--- a/arch/arm64/boot/dts/cix/sky1.dtsi
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -289,6 +289,156 @@ mbox_ap2sfh: mailbox@80a0000 {
cix,mbox-dir = "tx";
};
+ pcie_x8_rc: pcie@a010000 { /* X8 */
+ compatible = "cix,sky1-pcie-host";
+ reg = <0x00 0x0a010000 0x00 0x10000>,
+ <0x00 0x0a000000 0x00 0x10000>,
+ <0x00 0x2c000000 0x00 0x4000000>,
+ <0x00 0x60000000 0x00 0x00100000>;
+ reg-names = "reg", "rcsu", "cfg", "msg";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH 0>;
+ max-link-speed = <4>;
+ num-lanes = <8>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0xc0 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0x0 0x60100000 0x0 0x60100000 0x0 0x00100000>,
+ <0x02000000 0x0 0x60200000 0x0 0x60200000 0x0 0x1fe00000>,
+ <0x43000000 0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>;
+ msi-map = <0xc000 &gic_its 0xc000 0x4000>;
+ vendor-id = <0x1f6c>;
+ device-id = <0x0001>;
+ cdns,no-inbound-bar;
+ sky1,pcie-ctrl-id = <0x0>;
+ status = "disabled";
+ };
+
+ pcie_x4_rc: pcie@a070000 { /* X4 */
+ compatible = "cix,sky1-pcie-host";
+ reg = <0x00 0x0a070000 0x00 0x10000>,
+ <0x00 0x0a060000 0x00 0x10000>,
+ <0x00 0x29000000 0x00 0x3000000>,
+ <0x00 0x50000000 0x00 0x00100000>;
+ reg-names = "reg", "rcsu", "cfg", "msg";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH 0>;
+ max-link-speed = <4>;
+ num-lanes = <4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x90 0xbf>;
+ device_type = "pci";
+ ranges = <0x01000000 0x00 0x50100000 0x00 0x50100000 0x00 0x00100000>,
+ <0x02000000 0x00 0x50200000 0x00 0x50200000 0x00 0x0fe00000>,
+ <0x43000000 0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>;
+ msi-map = <0x9000 &gic_its 0x9000 0x3000>;
+ vendor-id = <0x1f6c>;
+ device-id = <0x0001>;
+ cdns,no-inbound-bar;
+ sky1,pcie-ctrl-id = <0x1>;
+ status = "disabled";
+ };
+
+ pcie_x2_rc: pcie@a0c0000 { /* X2 */
+ compatible = "cix,sky1-pcie-host";
+ reg = <0x00 0x0a0c0000 0x00 0x10000>,
+ <0x00 0x0a060000 0x00 0x10000>,
+ <0x00 0x26000000 0x00 0x3000000>,
+ <0x00 0x40000000 0x00 0x00100000>;
+ reg-names = "reg", "rcsu", "cfg", "msg";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH 0>;
+ max-link-speed = <4>;
+ num-lanes = <2>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x60 0x8f>;
+ device_type = "pci";
+ ranges = <0x01000000 0x0 0x40100000 0x0 0x40100000 0x0 0x00100000>,
+ <0x02000000 0x0 0x40200000 0x0 0x40200000 0x0 0x0fe00000>,
+ <0x43000000 0x10 0x00000000 0x10 0x00000000 0x04 0x00000000>;
+ msi-map = <0x6000 &gic_its 0x6000 0x3000>;
+ vendor-id = <0x1f6c>;
+ device-id = <0x0001>;
+ cdns,no-inbound-bar;
+ sky1,pcie-ctrl-id = <0x2>;
+ status = "disabled";
+ };
+
+ pcie_x1_0_rc: pcie@a0d0000 { /* X1_0 */
+ compatible = "cix,sky1-pcie-host";
+ reg = <0x00 0x0a0d0000 0x00 0x10000>,
+ <0x00 0x0a060000 0x00 0x10000>,
+ <0x00 0x20000000 0x00 0x3000000>,
+ <0x00 0x30000000 0x00 0x00100000>;
+ reg-names = "reg", "rcsu", "cfg", "msg";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>;
+ max-link-speed = <4>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0x2f>;
+ device_type = "pci";
+ ranges = <0x01000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000>,
+ <0x02000000 0x0 0x30200000 0x0 0x30200000 0x0 0x07e00000>,
+ <0x43000000 0x08 0x00000000 0x08 0x00000000 0x04 0x00000000>;
+ msi-map = <0x0000 &gic_its 0x0000 0x3000>;
+ vendor-id = <0x1f6c>;
+ device-id = <0x0001>;
+ cdns,no-inbound-bar;
+ sky1,pcie-ctrl-id = <0x4>;
+ status = "disabled";
+ };
+
+ pcie_x1_1_rc: pcie@a0e0000 { /* X1_1 */
+ compatible = "cix,sky1-pcie-host";
+ reg = <0x00 0x0a0e0000 0x00 0x10000>,
+ <0x00 0x0a060000 0x00 0x10000>,
+ <0x00 0x23000000 0x00 0x3000000>,
+ <0x00 0x38000000 0x00 0x00100000>;
+ reg-names = "reg", "rcsu", "cfg", "msg";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 2 &gic 0 0 GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 3 &gic 0 0 GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH 0>,
+ <0 0 0 4 &gic 0 0 GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH 0>;
+ max-link-speed = <4>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x30 0x5f>;
+ device_type = "pci";
+ ranges = <0x01000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>,
+ <0x02000000 0x0 0x38200000 0x0 0x38200000 0x0 0x07e00000>,
+ <0x43000000 0x0C 0x00000000 0x0C 0x00000000 0x04 0x00000000>;
+ msi-map = <0x3000 &gic_its 0x3000 0x3000>;
+ vendor-id = <0x1f6c>;
+ device-id = <0x0001>;
+ sky1,pcie-ctrl-id = <0x3>;
+ cdns,no-inbound-bar;
+ status = "disabled";
+ };
+
gic: interrupt-controller@e010000 {
compatible = "arm,gic-v3";
reg = <0x0 0x0e010000 0 0x10000>, /* GICD */
--
2.49.0
