On 6/23/25 6:22 AM, Lukas Wunner wrote:
When pcie_failed_link_retrain() fails to retrain, it tries to revert to
the previous link speed. However it calculates that speed from the Link
Control 2 register without masking out non-speed bits first.
PCIE_LNKCTL2_TLS2SPEED() converts such incorrect values to
PCI_SPEED_UNKNOWN, which in turn causes a WARN splat in
pcie_set_target_speed():
pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port
pci 0000:00:01.1: broken device, retraining non-functional downstream link at 2.5GT/s
pci 0000:00:01.1: retraining failed
WARNING: CPU: 1 PID: 1 at drivers/pci/pcie/bwctrl.c:168 pcie_set_target_speed
RDX: 0000000000000001 RSI: 00000000000000ff RDI: ffff9acd82efa000
pcie_failed_link_retrain
pci_device_add
pci_scan_single_device
pci_scan_slot
pci_scan_child_bus_extend
acpi_pci_root_create
pci_acpi_scan_root
acpi_pci_root_add
acpi_bus_attach
device_for_each_child
acpi_dev_for_each_child
acpi_bus_attach
device_for_each_child
acpi_dev_for_each_child
acpi_bus_attach
acpi_bus_scan
acpi_scan_init
acpi_init
Per the calling convention of the System V AMD64 ABI, the arguments to
pcie_set_target_speed(struct pci_dev *, enum pci_bus_speed, bool) are
stored in RDI, RSI, RDX. As visible above, RSI contains 0xff, i.e.
PCI_SPEED_UNKNOWN.
Fixes: f68dea13405c ("PCI: Revert to the original speed after PCIe failed link retraining")
Reported-by: Andrew <andreasx0@xxxxxxxxxxxxxx>
Closes: https://lore.kernel.org/r/7iNzXbCGpf8yUMJZBQjLdbjPcXrEJqBxy5-bHfppz0ek-h4_-G93b1KUrm106r2VNF2FV_sSq0nENv4RsRIUGnlYZMlQr2ZD2NyB5sdj5aU=@protonmail.com/
Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # v6.12+
---
Looks good to me.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
drivers/pci/quirks.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index d7f4ee6..deaaf4f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -108,7 +108,7 @@ int pcie_failed_link_retrain(struct pci_dev *dev)
pcie_capability_read_word(dev, PCI_EXP_LNKCTL2, &lnkctl2);
pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta);
if (!(lnksta & PCI_EXP_LNKSTA_DLLLA) && pcie_lbms_seen(dev, lnksta)) {
- u16 oldlnkctl2 = lnkctl2;
+ u16 oldlnkctl2 = lnkctl2 & PCI_EXP_LNKCTL2_TLS;
pci_info(dev, "broken device, retraining non-functional downstream link at 2.5GT/s\n");
--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
