Add WAKE# gpio which is needed to bring PCIe device state
from D3cold to D0.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 1 +
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 1 +
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 1 +
3 files changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 10c152ac03c874df5f1dc386d9079d3db1c55362..27cd94cb48d91e57d07cb38e008859d0c354b8fc 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -810,6 +810,7 @@ &mdss_edp_phy {
&pcieport1 {
reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
};
&pcie1 {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 60b3cf50ea1d61dd5e8b573b5f1c6faa1c291eee..d435db860625d52842bf8e92d6223f67343121db 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -477,6 +477,7 @@ &pcie1 {
&pcieport1 {
reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
};
&pm8350c_pwm {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 0b0212b670797a364d7f0e7a458fc73245fff8db..762615a61e046c711b248579abcbc58b86e428c1 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -418,6 +418,7 @@ &lpass_va_macro {
&pcieport1 {
reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
};
&pcie1 {
--
2.34.1
