On Fri, May 30, 2025 at 03:57:14PM +0200, Niklas Cassel wrote:
> On Wed, May 28, 2025 at 05:42:51PM -0500, Bjorn Helgaas wrote:
> > On Tue, May 06, 2025 at 09:39:36AM +0200, Niklas Cassel wrote:
> > > Commit ec9fd499b9c6 ("PCI: dw-rockchip: Don't wait for link since we can
> > > detect Link Up") changed so that we no longer call dw_pcie_wait_for_link(),
> > > and instead enumerate the bus when receiving a Link Up IRQ.
> > >
> > > Laszlo Fiat reported (off-list) that his PLEXTOR PX-256M8PeGN NVMe SSD is
> > > no longer functional, and simply reverting commit ec9fd499b9c6 ("PCI:
> > > dw-rockchip: Don't wait for link since we can detect Link Up") makes his
> > > SSD functional again.
> > >
> > > It seems that we are enumerating the bus before the endpoint is ready.
> > > Adding a msleep(PCIE_T_RRS_READY_MS) before enumerating the bus in the
> > > threaded IRQ handler makes the SSD functional once again.
> >
> > This sounds like a problem that could happen with any controller, not
> > just dw-rockchip?
>
> Correct.
>
> > Are we missing some required delay that should be
> > in generic code? Or is this a PLEXTOR defect that everybody has to
> > pay the price for?
>
> So far, the Plextor drive is the only endpoint that we know of, which is
> not working without the delay.
>
> We have no idea if this Plextor drive is the only bad behaving endpoint or
> if there are many endpoints with similar issues, because before the
> use_linkup_irq() callback was introduced, we always had (the equivalent of)
> this delay.
>
> Since this will only delay once the link up IRQ is triggered, it will not
> affect the boot time when there are no endpoint plugged in to the slot, so
> it seemed quite harmless to reintroduce this delay before enumeration.
>
> But other suggestions are of course welcome.
>
>
> Since it seems that we can read the PCI vendor and PCI device ID, it seems
> that at least some config space reads seem to work, so I guess that we could
> try to quirk the PCI vendor and PCI device ID in the nvme driver.
>
> The nvme driver does have a NVME_QUIRK_DELAY_BEFORE_CHK_RDY quirk for some
> Samsung drive, perhaps we could try something similar to the Plextor drive?
Looks like NVME_QUIRK_DELAY_BEFORE_CHK_RDY is used for Seagate (Vendor
ID 0x1bb1), Samsung (0x144d), Memblaze (0x1c5f), and HGST/WDC (0x1c58,
annoyingly not shown as reserved by
https://pcisig.com/membership/member-companies?combine=1c58) adapters.
If we can read the Vendor and Device IDs (and, I assume, BARs and
other things used by enumeration), it sounds like possibly an NVMe
issue, not a PCI issue.
If we can use NVME_QUIRK_DELAY_BEFORE_CHK_RDY for this drive as well,
I think we should because it at least connects the extra delay with a
specific device.
> I don't personally have this problematic NVMe drive, so I am not able to test
> such a patch. The user who reported the problem, Laszlo, has been doing all
> the testing.
>
>
> Perhaps Laszlo could try something like:
>
>
> diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
> index 6b04473c0ab7..9c409af34548 100644
> --- a/drivers/nvme/host/core.c
> +++ b/drivers/nvme/host/core.c
> @@ -2865,6 +2865,12 @@ static const struct nvme_core_quirk_entry core_quirks[] = {
> .quirks = NVME_QUIRK_DELAY_BEFORE_CHK_RDY |
> NVME_QUIRK_NO_DEEPEST_PS |
> NVME_QUIRK_IGNORE_DEV_SUBNQN,
> + },
> + {
> +
> + .vid = 0x144d,
> + .mn = "Samsung Portable SSD X5",
> + .quirks = NVME_QUIRK_DELAY_BEFORE_CHK_RDY,
> }
> };
>
>
> .. with the .vid and .mn fields replacd with the correct ones for the Plextor
> drive. (Don't forget to revert patch in $subject when testing this alternate
> solution.)
>
> I don't have a preference for either solution.
>
>
> Kind regards,
> Niklas
