Re: [PATCH v4] PCI: Prevent power state transition of erroneous device

[Mario Limonciello <superm1@xxxxxxxxxx>]

On 5/20/2025 4:48 AM, Raag Jadav wrote:
> On Mon, May 19, 2025 at 11:42:31PM +0200, Denis Benato wrote:
> > On 5/19/25 12:41, Raag Jadav wrote:
> > > On Mon, May 19, 2025 at 03:58:08PM +0530, Raag Jadav wrote:
> > > > If error status is set on an AER capable device, most likely either the
> > > > device recovery is in progress or has already failed. Neither of the
> > > > cases are well suited for power state transition of the device, since
> > > > this can lead to unpredictable consequences like resume failure, or in
> > > > worst case the device is lost because of it. Leave the device in its
> > > > existing power state to avoid such issues.
> > > >
> > > > Signed-off-by: Raag Jadav <raag.jadav@xxxxxxxxx>
> > > > ---
> > > >
> > > > v2: Synchronize AER handling with PCI PM (Rafael)
> > > > v3: Move pci_aer_in_progress() to pci_set_low_power_state() (Rafael)
> > > >      Elaborate "why" (Bjorn)
> > > > v4: Rely on error status instead of device status
> > > >      Condense comment (Lukas)
> > > Since pci_aer_in_progress() is changed I've not included Rafael's tag with
> > > my understanding of this needing a revisit. If this was a mistake, please
> > > let me know.
> > >
> > > Denis, Mario, does this fix your issue?
> > Hello,
> >
> > Unfortunately no, I have prepared a dmesg but had to remove the bootup process because it was too long of a few kb: https://pastebin.com/1uBEA1FL
>
> Thanks for the test. It seems there's no hotplug event this time around
> and endpoint device is still intact without any PCI related failure.
>
> Also,
>
> amdgpu 0000:09:00.0: PCI PM: Suspend power state: D3hot
>
> Which means whatever you're facing is either not related to this patch,
> or at best exposed some nasty side-effect that's not handled correctly
> by the driver.
>
> I'd say amdgpu folks would be of better help for your case.
>
> Raag

So according to the logs Denis shared with v4 
(https://pastebin.com/1uBEA1FL) the GPU should have been going to BOCO. 
This stands for "Bus off Chip Off"

amdgpu 0000:09:00.0: amdgpu: Using BOCO for runtime pm

If it's going to D3hot - that's not going to be BOCO, it should be going 
to D3cold.

Denis, can you redo your logs with out Raag's patch patch and set 
CONFIG_PCI_DEBUG to compare?  The 6.14.6 log you shared already 
(https://pastebin.com/kLZtibcD) also chooses BOCO but I'm suspecting 
picks D3cold like it should.

> > > > More discussion on [1].
> > > > [1] https://lore.kernel.org/all/CAJZ5v0g-aJXfVH+Uc=9eRPuW08t-6PwzdyMXsC6FZRKYJtY03Q@xxxxxxxxxxxxxx/
> > > >
> > > >   drivers/pci/pci.c      |  9 +++++++++
> > > >   drivers/pci/pcie/aer.c | 13 +++++++++++++
> > > >   include/linux/aer.h    |  2 ++
> > > >   3 files changed, 24 insertions(+)
> > > >
> > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > > > index 4d7c9f64ea24..a20018692933 100644
> > > > --- a/drivers/pci/pci.c
> > > > +++ b/drivers/pci/pci.c
> > > > @@ -9,6 +9,7 @@
> > > >    */
> > > >   
> > > >   #include <linux/acpi.h>
> > > > +#include <linux/aer.h>
> > > >   #include <linux/kernel.h>
> > > >   #include <linux/delay.h>
> > > >   #include <linux/dmi.h>
> > > > @@ -1539,6 +1540,14 @@ static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state, bool
> > > >   	   || (state == PCI_D2 && !dev->d2_support))
> > > >   		return -EIO;
> > > >   
> > > > +	/*
> > > > +	 * If error status is set on an AER capable device, it is not well
> > > > +	 * suited for power state transition. Leave it in its existing power
> > > > +	 * state to avoid issues like unpredictable resume failure.
> > > > +	 */
> > > > +	if (pci_aer_in_progress(dev))
> > > > +		return -EIO;
> > > > +
> > > >   	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
> > > >   	if (PCI_POSSIBLE_ERROR(pmcsr)) {
> > > >   		pci_err(dev, "Unable to change power state from %s to %s, device inaccessible\n",
> > > > diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> > > > index a1cf8c7ef628..617fbac0d38a 100644
> > > > --- a/drivers/pci/pcie/aer.c
> > > > +++ b/drivers/pci/pcie/aer.c
> > > > @@ -237,6 +237,19 @@ int pcie_aer_is_native(struct pci_dev *dev)
> > > >   }
> > > >   EXPORT_SYMBOL_NS_GPL(pcie_aer_is_native, "CXL");
> > > >   
> > > > +bool pci_aer_in_progress(struct pci_dev *dev)
> > > > +{
> > > > +	int aer = dev->aer_cap;
> > > > +	u32 cor, uncor;
> > > > +
> > > > +	if (!pcie_aer_is_native(dev))
> > > > +		return false;
> > > > +
> > > > +	pci_read_config_dword(dev, aer + PCI_ERR_COR_STATUS, &cor);
> > > > +	pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, &uncor);
> > > > +	return cor || uncor;
> > > > +}
> > > > +
> > > >   static int pci_enable_pcie_error_reporting(struct pci_dev *dev)
> > > >   {
> > > >   	int rc;
> > > > diff --git a/include/linux/aer.h b/include/linux/aer.h
> > > > index 02940be66324..e6a380bb2e68 100644
> > > > --- a/include/linux/aer.h
> > > > +++ b/include/linux/aer.h
> > > > @@ -56,12 +56,14 @@ struct aer_capability_regs {
> > > >   #if defined(CONFIG_PCIEAER)
> > > >   int pci_aer_clear_nonfatal_status(struct pci_dev *dev);
> > > >   int pcie_aer_is_native(struct pci_dev *dev);
> > > > +bool pci_aer_in_progress(struct pci_dev *dev);
> > > >   #else
> > > >   static inline int pci_aer_clear_nonfatal_status(struct pci_dev *dev)
> > > >   {
> > > >   	return -EINVAL;
> > > >   }
> > > >   static inline int pcie_aer_is_native(struct pci_dev *dev) { return 0; }
> > > > +static inline bool pci_aer_in_progress(struct pci_dev *dev) { return false; }
> > > >   #endif
> > > >   
> > > >   void pci_print_aer(struct pci_dev *dev, int aer_severity,
> > > > --
> > > > 2.34.1