This series adds document, phy, configs support for PCIe in QCS8300. The series depend on the following devicetree. This series depends on PCIe SMMU for QCS8300: https://lore.kernel.org/all/dc535643-235d-46e9-b241-7d7b0e75e6ac@xxxxxxxxxxxxxxxx/ Have follwing changes: - Add dedicated schema for the PCIe controllers found on QCS8300. - Add compatible for qcs8300 platform. - Add configurations in devicetree for PCIe0, including registers, clocks, interrupts and phy setting sequence. - Add configurations in devicetree for PCIe1, including registers, clocks, interrupts and phy setting sequence. Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@xxxxxxxxxxx> --- Changes in v5: - Add QCOM PCIe controller version in commit msg (Mani) - Modify platform dts change subject (Dmitry) - Update bindings to fix the dtb check errors. - Remove qcs8300 compatible in driver, do not need it (Dmitry) - Fixed compile error found by kernel test robot - Link to v4: https://lore.kernel.org/linux-phy/20241220055239.2744024-1-quic_ziyuzhan@xxxxxxxxxxx/ Changes in v4: - Add received tag - Fixed compile error found by kernel test robot - Link to v3: https://lore.kernel.org/lkml/202412211301.bQO6vXpo-lkp@xxxxxxxxx/T/#mdd63e5be39acbf879218aef91c87b12d4540e0f7 Changes in v3: - Add received tag(Rob & Dmitry) - Update pcie_phy in gcc node to soc dtsi(Dmitry & Konrad) - remove pcieprot0 node(Konrad & Mani) - Fix format comments(Konrad) - Update base-commit to tag: next-20241213(Bjorn) - Corrected of_device_id.data from 1.9.0 to 1.34.0. - Link to v2: https://lore.kernel.org/all/20241128081056.1361739-1-quic_ziyuzhan@xxxxxxxxxxx/ Changes in v2: - Fix some format comments and match the style in x1e80100(Konrad) - Add global interrupt for PCIe0 and PCIe1(Konrad) - split the soc dtsi and the platform dts into two changes(Konrad) - Link to v1: https://lore.kernel.org/all/20241114095409.2682558-1-quic_ziyuzhan@xxxxxxxxxxx/ Ziyue Zhang (6): dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for sa8775p dt-bindings: PCI: qcom,pcie-sa8775p: document qcs8300 arm64: dts: qcom: qcs8300: enable pcie0 arm64: dts: qcom: qcs8300-ride: enable pcie0 interface arm64: dts: qcom: qcs8300: enable pcie1 arm64: dts: qcom: qcs8300-ride: enable pcie1 interface .../bindings/pci/qcom,pcie-sa8775p.yaml | 26 +- .../phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 4 +- arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 80 +++++ arch/arm64/boot/dts/qcom/qcs8300.dtsi | 297 +++++++++++++++++- 4 files changed, 396 insertions(+), 11 deletions(-) base-commit: a269b93a67d815c8215fbfadeb857ae5d5f519d3 -- 2.34.1
