Hi Florian,
On 20:53 Tue 22 Apr , Andrea della Porta wrote:
> The RP1 found on Raspberry Pi 5 board needs an external crystal at 50MHz.
> Add clk_rp1_xosc node to provide that.
>
> Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx>
> Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
A gentle reminder for patches 8 through 12 of this series, which I guess
would ideally be taken by you. Since the merge window is approaching, do
you think it's feasible to iterate a second pull request to Arnd with my
patches too?
With respect to your devicetree/next branch, my patches have the following
conflicts:
PATCH 9:
- arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts: &pcie1 and &pcie2
reference at the end, my patch was rebased on linux-next which has them
while your devicetree branch has not. This is trivial to fix too.
PATCH 9 and 10:
- arch/arm64/boot/dts/broadcom/Makefile on your branch has a line recently
added by Stefan's latest patch for RPi2. The fix is trivial.
PATCH 11 and 12:
- arch/arm64/configs/defconfig: just a couple of fuzz lines.
Please let me know if I should resend those patches adjusted for your tree.
Many thanks,
Andrea
> ---
> arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
> index 34470e3d7171..6ea3c102e0d6 100644
> --- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
> +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
> @@ -16,6 +16,13 @@ chosen: chosen {
> stdout-path = "serial10:115200n8";
> };
>
> + clk_rp1_xosc: clock-50000000 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-output-names = "rp1-xosc";
> + clock-frequency = <50000000>;
> + };
> +
> /* Will be filled by the bootloader */
> memory@0 {
> device_type = "memory";
> --
> 2.35.3
>
