-------- Original Message --------
On 06/05/2025 16:33, Niklas Cassel <cassel@xxxxxxxxxx> wrote:
> On Tue, May 06, 2025 at 09:39:35AM +0200, Niklas Cassel wrote:
> > Hello there,
> >
> > Commit 8d3bf19f1b58 ("PCI: dwc: Don't wait for link up if driver can detect
> > Link Up event") added support for DWC to not wait for link up before
> > enumerating the bus. However, we cannot simply enumerate the bus after
> > receiving a Link Up IRQ, we still need to wait PCIE_T_RRS_READY_MS time
> > to allow a device to become ready after deasserting PERST. To avoid
> > bringing back an conditional delay during probe, perform the wait in the
> > threaded IRQ handler instead.
> >
> > Please review.
> >
> >
> > Kind regards,
> > Niklas
>
> Hello Laszlo,
>
> Since you have a RK3588 based board, sending a Tested-by
> tag on testing patches 1-2 makes sense.
>
> However, patches 3-4 are for Qualcomm based boards.
> I'm not sure if you also have a Qualcomm board at your disposal.
>
> If you don't, Manivannan can probably drop your Tested-by tags
> on patches 3-4, but it might be good to know until next time.
Hello Niklas,
You are right, I only have a Rockchip based board, which I have tested on.
Mannivan should drop my Tested-by tags on the qcom patches. My mistake, I am sorry.
>
> Thank you for testing!
>
You are welcome! Thank you for making my board work again.
Bye,
Laszlo
