Add a device tree binding for the Toshiba TC9563 PCIe switch, which provides an Ethernet MAC integrated to the 3rd downstream port and two downstream PCIe ports. Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx> --- .../devicetree/bindings/pci/toshiba,tc9563.yaml | 178 +++++++++++++++++++++ 1 file changed, 178 insertions(+) diff --git a/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml b/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml new file mode 100644 index 0000000000000000000000000000000000000000..82c902b67852d6c4b0305764a2231fe04e83458d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/toshiba,tc9563.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC9563 PCIe switch + +maintainers: + - Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx> + +description: | + Toshiba TC9563 PCIe switch has one upstream and three downstream ports. + The 3rd downstream port has integrated endpoint device of Ethernet MAC. + Other two downstream ports are supposed to connect to external device. + + The TC9563 PCIe switch can be configured through I2C interface before + PCIe link is established to change FTS, ASPM related entry delays, + tx amplitude etc for better power efficiency and functionality. + +properties: + compatible: + enum: + - pci1179,0623 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: + GPIO controlling the RESX# pin. + + vdd18-supply: true + + vdd09-supply: true + + vddc-supply: true + + vddio1-supply: true + + vddio2-supply: true + + vddio18-supply: true + + i2c-parent: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + A phandle to the parent I2C node and the slave address of the device + used to do configure tc9563 to change FTS, tx amplitude etc. + items: + - description: Phandle to the I2C controller node + - description: I2C slave address + +patternProperties: + "^pcie@[1-3],0$": + description: + child nodes describing the internal downstream ports + the tc9563 switch. + type: object + allOf: + - $ref: "#/$defs/tc9563-node" + - $ref: /schemas/pci/pci-pci-bridge.yaml# + unevaluatedProperties: false + +$defs: + tc9563-node: + type: object + + properties: + toshiba,tx-amplitude-microvolt: + description: + Change Tx Margin setting for low power consumption. + + toshiba,no-dfe-support: + type: boolean + description: + Disable DFE (Decision Feedback Equalizer), which mitigates + intersymbol interference and some reflections caused by impedance mismatches. + +required: + - reset-gpios + - vdd18-supply + - vdd09-supply + - vddc-supply + - vddio1-supply + - vddio2-supply + - vddio18-supply + - i2c-parent + +allOf: + - $ref: "#/$defs/tc9563-node" + - $ref: /schemas/pci/pci-bus-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + pcie { + #address-cells = <3>; + #size-cells = <2>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + bus-range = <0x01 0xff>; + + pcie@0,0 { + compatible = "pci1179,0623"; + + reg = <0x10000 0x0 0x0 0x0 0x0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + bus-range = <0x02 0xff>; + + i2c-parent = <&qup_i2c 0x77>; + + vdd18-supply = <&vdd>; + vdd09-supply = <&vdd>; + vddc-supply = <&vdd>; + vddio1-supply = <&vdd>; + vddio2-supply = <&vdd>; + vddio18-supply = <&vdd>; + + reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + + pcie@1,0 { + compatible = "pciclass,0604"; + reg = <0x20800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x03 0xff>; + + toshiba,no-dfe-support; + }; + + pcie@2,0 { + compatible = "pciclass,0604"; + reg = <0x21000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x04 0xff>; + }; + + pcie@3,0 { + compatible = "pciclass,0604"; + reg = <0x21800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x05 0xff>; + + toshiba,tx-amplitude-microvolt = <10>; + + ethernet@0,0 { + reg = <0x50000 0x0 0x0 0x0 0x0>; + }; + + ethernet@0,1 { + reg = <0x50100 0x0 0x0 0x0 0x0>; + }; + }; + }; + }; + }; -- 2.34.1
