On 8/26/25 2:57 PM, Mike Snitzer wrote:
> Add 'io_cache_read' to NFSD's debugfs interface so that: Any data
> read by NFSD will either be:
> - cached using page cache (NFSD_IO_BUFFERED=1)
> - cached but removed from the page cache upon completion
> (NFSD_IO_DONTCACHE=2).
> - not cached (NFSD_IO_DIRECT=3)
>
> io_cache_read may be set by writing to:
> /sys/kernel/debug/nfsd/io_cache_read
>
> If NFSD_IO_DONTCACHE is specified using 2, FOP_DONTCACHE must be
> advertised as supported by the underlying filesystem (e.g. XFS),
> otherwise all IO flagged with RWF_DONTCACHE will fail with
> -EOPNOTSUPP.
>
> If NFSD_IO_DIRECT is specified using 3, the IO must be aligned
> relative to the underlying block device's logical_block_size. Also the
> memory buffer used to store the read must be aligned relative to the
> underlying block device's dma_alignment.
>
> Signed-off-by: Mike Snitzer <snitzer@xxxxxxxxxx>
> Reviewed-by: Jeff Layton <jlayton@xxxxxxxxxx>
> ---
> fs/nfsd/debugfs.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++
> fs/nfsd/nfsd.h | 9 ++++++++
> fs/nfsd/vfs.c | 18 +++++++++++++++
> 3 files changed, 84 insertions(+)
>
> diff --git a/fs/nfsd/debugfs.c b/fs/nfsd/debugfs.c
> index 84b0c8b559dc9..3cadd45868b48 100644
> --- a/fs/nfsd/debugfs.c
> +++ b/fs/nfsd/debugfs.c
> @@ -27,11 +27,65 @@ static int nfsd_dsr_get(void *data, u64 *val)
> static int nfsd_dsr_set(void *data, u64 val)
> {
> nfsd_disable_splice_read = (val > 0) ? true : false;
> + if (!nfsd_disable_splice_read) {
> + /*
> + * Cannot use NFSD_IO_DONTCACHE or NFSD_IO_DIRECT
> + * if splice_read is enabled.
> + */
> + nfsd_io_cache_read = NFSD_IO_BUFFERED;
> + }
> return 0;
> }
>
> DEFINE_DEBUGFS_ATTRIBUTE(nfsd_dsr_fops, nfsd_dsr_get, nfsd_dsr_set, "%llu\n");
>
> +/*
> + * /sys/kernel/debug/nfsd/io_cache_read
> + *
> + * Contents:
> + * %1: NFS READ will use buffered IO
> + * %2: NFS READ will use dontcache (buffered IO w/ dropbehind)
> + * %3: NFS READ will use direct IO
> + *
> + * The default value of this setting is zero (UNSPECIFIED).
Hi Mike -
I can't remember why we have the UNSPECIFIED setting? IME a debug
file reflects the current setting, so if our default behavior is
"buffered" then the first "cat io_cache_read" should reflect that
rather than "I haven't been changed yet". This doesn't seem like the
usual semantics of a /sys/kernel/debug file, IME.
For example, a user space application may want to read io_cache_read
to find out what the current behavior is. If it gets 0 (UNSPECIFIED)
then it has found out nothing.
However, if there is a good reason to keep UNSPECIFIED, then you
need to add a " %0: NFS READ uses the default behavior" to the
documenting comment for nfsd_io_cache_{read,write}.
My preference is to remove NFSD_IO_UNSPECIFIED from this patch
and her sister (4/7).
> + * This setting takes immediate effect for all NFS versions,
> + * all exports, and in all NFSD net namespaces.
> + */
> +
> +static int nfsd_io_cache_read_get(void *data, u64 *val)
> +{
> + *val = nfsd_io_cache_read;
> + return 0;
> +}
> +
> +static int nfsd_io_cache_read_set(void *data, u64 val)
> +{
> + int ret = 0;
> +
> + switch (val) {
> + case NFSD_IO_BUFFERED:
> + nfsd_io_cache_read = NFSD_IO_BUFFERED;
> + break;
> + case NFSD_IO_DONTCACHE:
> + case NFSD_IO_DIRECT:
> + /*
> + * Must disable splice_read when enabling
> + * NFSD_IO_DONTCACHE or NFSD_IO_DIRECT.
> + */
> + nfsd_disable_splice_read = true;
> + nfsd_io_cache_read = val;
> + break;
> + default:
> + ret = -EINVAL;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +DEFINE_DEBUGFS_ATTRIBUTE(nfsd_io_cache_read_fops, nfsd_io_cache_read_get,
> + nfsd_io_cache_read_set, "%llu\n");
> +
> void nfsd_debugfs_exit(void)
> {
> debugfs_remove_recursive(nfsd_top_dir);
> @@ -44,4 +98,7 @@ void nfsd_debugfs_init(void)
>
> debugfs_create_file("disable-splice-read", S_IWUSR | S_IRUGO,
> nfsd_top_dir, NULL, &nfsd_dsr_fops);
> +
> + debugfs_create_file("io_cache_read", S_IWUSR | S_IRUGO,
> + nfsd_top_dir, NULL, &nfsd_io_cache_read_fops);
> }
> diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
> index 1cd0bed57bc2f..6ef799405145f 100644
> --- a/fs/nfsd/nfsd.h
> +++ b/fs/nfsd/nfsd.h
> @@ -153,6 +153,15 @@ static inline void nfsd_debugfs_exit(void) {}
>
> extern bool nfsd_disable_splice_read __read_mostly;
>
> +enum {
> + NFSD_IO_UNSPECIFIED = 0,
> + NFSD_IO_BUFFERED,
> + NFSD_IO_DONTCACHE,
> + NFSD_IO_DIRECT,
> +};
> +
> +extern u64 nfsd_io_cache_read __read_mostly;
And then here, initialize nfsd_io_cache_read to reflect the default
behavior. That would be NFSD_IO_BUFFERED for now... then later we might
want to change it to NFSD_IO_DIRECT, for instance.
Same suggestion for 4/7.
> +
> extern int nfsd_max_blksize;
>
> static inline int nfsd_v4client(struct svc_rqst *rq)
> diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
> index 79439ad93880a..8ea8b80097195 100644
> --- a/fs/nfsd/vfs.c
> +++ b/fs/nfsd/vfs.c
> @@ -49,6 +49,7 @@
> #define NFSDDBG_FACILITY NFSDDBG_FILEOP
>
> bool nfsd_disable_splice_read __read_mostly;
> +u64 nfsd_io_cache_read __read_mostly;
>
> /**
> * nfserrno - Map Linux errnos to NFS errnos
> @@ -1099,6 +1100,23 @@ __be32 nfsd_iter_read(struct svc_rqst *rqstp, struct svc_fh *fhp,
> size_t len;
>
> init_sync_kiocb(&kiocb, file);
> +
> + switch (nfsd_io_cache_read) {
> + case NFSD_IO_DIRECT:
> + /* Verify ondisk and memory DIO alignment */
> + if (nf->nf_dio_mem_align && nf->nf_dio_read_offset_align &&
> + (((offset | *count) & (nf->nf_dio_read_offset_align - 1)) == 0) &&
> + (base & (nf->nf_dio_mem_align - 1)) == 0)
> + kiocb.ki_flags = IOCB_DIRECT;
> + break;
> + case NFSD_IO_DONTCACHE:
> + kiocb.ki_flags = IOCB_DONTCACHE;
> + fallthrough;
Nit: Make this "break;". This is brittle: if someone adds something to
the NFSD_IO_BUFFERED arm but happens to miss that the DONTCACHE arm
above it is "fallthrough" then we have a latent bug.
Same suggestion for 4/7.
> + case NFSD_IO_UNSPECIFIED:
> + case NFSD_IO_BUFFERED:
> + break;
> + }
> +
> kiocb.ki_pos = offset;
>
> v = 0;
--
Chuck Lever
