Use LINEAR_RANGE() instead of hand-writing it. It is more robust, should
the layout of the structure change one day.
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
drivers/leds/rgb/leds-mt6370-rgb.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/leds/rgb/leds-mt6370-rgb.c b/drivers/leds/rgb/leds-mt6370-rgb.c
index ebd3ba878dd5..c5927d0eb830 100644
--- a/drivers/leds/rgb/leds-mt6370-rgb.c
+++ b/drivers/leds/rgb/leds-mt6370-rgb.c
@@ -199,17 +199,17 @@ static const struct reg_field mt6372_reg_fields[F_MAX_FIELDS] = {
/* Current unit: microamp, time unit: millisecond */
static const struct linear_range common_led_ranges[R_MAX_RANGES] = {
- [R_LED123_CURR] = { 4000, 1, 6, 4000 },
- [R_LED4_CURR] = { 2000, 1, 3, 2000 },
- [R_LED_TRFON] = { 125, 0, 15, 200 },
- [R_LED_TOFF] = { 250, 0, 15, 400 },
+ [R_LED123_CURR] = LINEAR_RANGE(4000, 1, 6, 4000),
+ [R_LED4_CURR] = LINEAR_RANGE(2000, 1, 3, 2000),
+ [R_LED_TRFON] = LINEAR_RANGE(125, 0, 15, 200),
+ [R_LED_TOFF] = LINEAR_RANGE(250, 0, 15, 400),
};
static const struct linear_range mt6372_led_ranges[R_MAX_RANGES] = {
- [R_LED123_CURR] = { 2000, 1, 14, 2000 },
- [R_LED4_CURR] = { 2000, 1, 14, 2000 },
- [R_LED_TRFON] = { 125, 0, 15, 250 },
- [R_LED_TOFF] = { 250, 0, 15, 500 },
+ [R_LED123_CURR] = LINEAR_RANGE(2000, 1, 14, 2000),
+ [R_LED4_CURR] = LINEAR_RANGE(2000, 1, 14, 2000),
+ [R_LED_TRFON] = LINEAR_RANGE(125, 0, 15, 250),
+ [R_LED_TOFF] = LINEAR_RANGE(250, 0, 15, 500),
};
static const unsigned int common_tfreqs[] = {
--
2.49.0
