Should an error occur after a successful regulator_bulk_enable() call,
regulator_bulk_disable() should be called, as already done in the remove
function.
Instead of adding an error handling path in the probe, switch from
devm_regulator_bulk_get() to devm_regulator_bulk_get_enable() and
simplify the remove function and some other places accordingly.
Finally, add a missing const when defining rt5665_supply_names to please
checkpatch and constify a few bytes.
Fixes: 33ada14a26c8 ("ASoC: add rt5665 codec driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
Compile tested only
---
sound/soc/codecs/rt5665.c | 24 ++++--------------------
1 file changed, 4 insertions(+), 20 deletions(-)
diff --git a/sound/soc/codecs/rt5665.c b/sound/soc/codecs/rt5665.c
index e0d1991cffdb..bcb6d7c6f301 100644
--- a/sound/soc/codecs/rt5665.c
+++ b/sound/soc/codecs/rt5665.c
@@ -31,9 +31,7 @@
#include "rl6231.h"
#include "rt5665.h"
-#define RT5665_NUM_SUPPLIES 3
-
-static const char *rt5665_supply_names[RT5665_NUM_SUPPLIES] = {
+static const char * const rt5665_supply_names[] = {
"AVDD",
"MICVDD",
"VBAT",
@@ -46,7 +44,6 @@ struct rt5665_priv {
struct gpio_desc *gpiod_ldo1_en;
struct gpio_desc *gpiod_reset;
struct snd_soc_jack *hs_jack;
- struct regulator_bulk_data supplies[RT5665_NUM_SUPPLIES];
struct delayed_work jack_detect_work;
struct delayed_work calibrate_work;
struct delayed_work jd_check_work;
@@ -4471,8 +4468,6 @@ static void rt5665_remove(struct snd_soc_component *component)
struct rt5665_priv *rt5665 = snd_soc_component_get_drvdata(component);
regmap_write(rt5665->regmap, RT5665_RESET, 0);
-
- regulator_bulk_disable(ARRAY_SIZE(rt5665->supplies), rt5665->supplies);
}
#ifdef CONFIG_PM
@@ -4758,7 +4753,7 @@ static int rt5665_i2c_probe(struct i2c_client *i2c)
{
struct rt5665_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct rt5665_priv *rt5665;
- int i, ret;
+ int ret;
unsigned int val;
rt5665 = devm_kzalloc(&i2c->dev, sizeof(struct rt5665_priv),
@@ -4774,24 +4769,13 @@ static int rt5665_i2c_probe(struct i2c_client *i2c)
else
rt5665_parse_dt(rt5665, &i2c->dev);
- for (i = 0; i < ARRAY_SIZE(rt5665->supplies); i++)
- rt5665->supplies[i].supply = rt5665_supply_names[i];
-
- ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(rt5665->supplies),
- rt5665->supplies);
+ ret = devm_regulator_bulk_get_enable(&i2c->dev, ARRAY_SIZE(rt5665_supply_names),
+ rt5665_supply_names);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
return ret;
}
- ret = regulator_bulk_enable(ARRAY_SIZE(rt5665->supplies),
- rt5665->supplies);
- if (ret != 0) {
- dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
- return ret;
- }
-
-
rt5665->gpiod_ldo1_en = devm_gpiod_get_optional(&i2c->dev,
"realtek,ldo1-en",
GPIOD_OUT_HIGH);
--
2.49.0
