Add a buttons node and properties describing the "ONOFD" (MC13783) and "PWRON" (MC13892/MC34708) buttons available in the fsl,mc13xxx PMIC ICs. Signed-off-by: Alexander Kurz <akurz@xxxxxxxx> --- .../devicetree/bindings/mfd/fsl,mc13xxx.yaml | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml b/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml index 94e2f6557376..761267b42c85 100644 --- a/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml +++ b/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml @@ -39,6 +39,41 @@ properties: interrupts: maxItems: 1 + buttons: + type: object + $ref: /schemas/input/input.yaml# + description: Buttons + properties: + reg: + description: | + One of + MC13783 BUTTON IDs: + 0: ONOFD1 + 1: ONOFD2 + 2: ONOFD3 + MC13892 BUTTON IDs: + 0: PWRON1 + 1: PWRON2 + 2: PWRON3 + MC34708 BUTTON IDs: + 0: PWRON1 + 1: PWRON2 + + debounce-delay-ms: + enum: [0, 30, 150, 750] + default: 30 + description: | + Sets the debouncing delay in milliseconds. + Valid values: 0, 30, 150 and 750ms. + + active-low: + description: Set active when pin is pulled low. + + fsl,enable-reset: + description: | + Setting of the global reset option. + type: boolean + leds: type: object $ref: /schemas/leds/common.yaml# @@ -119,6 +154,10 @@ allOf: const: fsl,mc13783 then: properties: + buttons: + properties: + reg: + enum: [0, 1, 2] leds: properties: fsl,led-control: @@ -137,6 +176,10 @@ allOf: const: fsl,mc13892 then: properties: + buttons: + properties: + reg: + enum: [0, 1, 2] leds: properties: fsl,led-control: @@ -155,6 +198,10 @@ allOf: const: fsl,mc34708 then: properties: + buttons: + properties: + reg: + enum: [0, 1] leds: properties: fsl,led-control: @@ -183,6 +230,17 @@ examples: fsl,mc13xxx-uses-rtc; fsl,mc13xxx-uses-adc; + buttons { + #address-cells = <1>; + #size-cells = <0>; + onkey1@0 { + reg = <0>; + debounce-delay-ms = <30>; + active-low; + fsl,enable-reset; + }; + }; + leds { #address-cells = <1>; #size-cells = <0>; -- 2.39.5