Add the required node for haptic playback (Awinic AW86927).
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index 4c6cb4a644e2..9576efdf1e8d 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -866,7 +866,16 @@ ocp96011_sbu_mux: endpoint {
};
};
- /* AW86927FCR haptics @ 5a */
+ vibrator@5a {
+ compatible = "awinic,aw86927";
+ reg = <0x5a>;
+
+ interrupts-extended = <&tlmm 101 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&aw86927_int_default>;
+ pinctrl-names = "default";
+ };
};
&i2c2 {
@@ -1415,6 +1424,13 @@ usb_redrive_1v8_en_default: usb-redrive-1v8-en-default-state {
bias-disable;
output-high;
};
+
+ aw86927_int_default: aw86927-int-default-state {
+ pins = "gpio101";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
&uart5 {
--
2.43.0
