The Radxa NIO 12L board has an RGB LED, of which only red and blue
are controllable.
Red and blue LEDs: no need to choose, both are enabled.
Signed-off-by: Julien Massot <julien.massot@xxxxxxxxxxxxx>
---
.../boot/dts/mediatek/mt8395-radxa-nio-12l.dts | 31 ++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index fd596e2298285361ad7c2fb828feec598d75a73e..12288ad4d2932b7f78c96c0efe366a046721f919 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -10,6 +10,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
#include <dt-bindings/spmi/spmi.h>
@@ -73,6 +74,28 @@ button-volume-up {
};
};
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&gpio_leds_pins>;
+ pinctrl-names = "default";
+
+ /*
+ * This board has a RGB LED, of which only R and B
+ * are controllable.
+ */
+ led-0 {
+ label = "rgb-blue";
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ label = "rgb-red";
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
wifi_vreg: regulator-wifi-3v3-en {
compatible = "regulator-fixed";
regulator-name = "wifi_3v3_en";
@@ -647,6 +670,14 @@ pins {
};
};
+ gpio_leds_pins: gpio-leds-pins {
+ pins {
+ pinmux = <PINMUX_GPIO6__FUNC_GPIO6>,
+ <PINMUX_GPIO7__FUNC_GPIO7>;
+ output-low;
+ };
+ };
+
i2c2_pins: i2c2-pins {
pins-bus {
pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
--
2.50.1
