This series depends on the config option patch [1]. [1] https://lore.kernel.org/all/20250825132427.1618089-3-pinkesh.vaghela@xxxxxxxxxxxxxx/ Updates: v2 -> v3: - Use full name in "From" and "Signed-off-by" fields information. - eswin,eic7700-ahci.yaml - Remove the introduction to the reg, interrupts, phys, and phy-names fields. - Modify the usage of the clocks field in the examples. - Corrected the order of dt properties. - phy-eic7700-sata.c - Register operations use the GENMASK macro and FIELD_PREP instead of the original bit offset method, and add "#include <linux/bitfield.h>". - Modified some macro definition names. - Remove the redundant initialization assignments for "ret" and "val". - Delete ".suppress_bind_attrs = true". - Modify the driver name. - Add "#include <linux/io.h>" to fix the robot test issue. - Link to v2: https://lore.kernel.org/lkml/20250819134722.220-1-luyulin@xxxxxxxxxxxxxxxxxx/ v2 -> v1: - Delete the original controller driver and use ahci_dwc.c instead. - Add eswin,eic7700-ahci.yaml - Correct the descriptions of reset, interrupt and other hardware resources for the sata controller on EIC7700 SoC. - The clocks for both sata controller and sata PHY are controlled via a register bit in the HSP bus and are not registered in the clock tree. Clock are managed within the PHY driver, therefore it is not described in this document. - Add $ref: snps,dwc-ahci-common.yaml#. - Add eswin,eic7700-sata-phy.yaml - Add this file to include the description of the PHY on EIC7700 SoC. - Add an eswin directory under the PHY driver path, and include the SATA PHY driver code for EIC7700 SoC. - Link to v1: https://lore.kernel.org/all/20250515085114.1692-1-hehuan1@xxxxxxxxxxxxxxxxxx/ Yulin Lu (3): dt-bindings: ata: eswin: Document for EIC7700 SoC ahci dt-bindings: phy: eswin: Document for EIC7700 SoC SATA PHY phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver .../bindings/ata/eswin,eic7700-ahci.yaml | 80 +++++++ .../bindings/phy/eswin,eic7700-sata-phy.yaml | 36 +++ drivers/phy/Kconfig | 1 + drivers/phy/Makefile | 1 + drivers/phy/eswin/Kconfig | 14 ++ drivers/phy/eswin/Makefile | 2 + drivers/phy/eswin/phy-eic7700-sata.c | 205 ++++++++++++++++++ 7 files changed, 339 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml create mode 100644 Documentation/devicetree/bindings/phy/eswin,eic7700-sata-phy.yaml create mode 100644 drivers/phy/eswin/Kconfig create mode 100644 drivers/phy/eswin/Makefile create mode 100644 drivers/phy/eswin/phy-eic7700-sata.c -- 2.25.1
