If the port of a device does not support Device Initiated Power
Management (DIPM), that is, the port is flagged with ATA_FLAG_NO_DIPM,
the DIPM feature of a device should be disabled when the device is first
configured.
Introduce the function ata_dev_config_lpm() to disable DIPM on a
device that supports this feature if the port of the device is flagged
with ATA_FLAG_NO_DIPM. ata_dev_config_lpm() is called from
ata_dev_configure(), ensuring that a device DIPM feature is disabled
when it cannot be used.
Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
---
drivers/ata/libata-core.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3918ea624e0b..0d85474f6640 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2790,6 +2790,27 @@ static void ata_dev_config_cpr(struct ata_device *dev)
kfree(buf);
}
+/*
+ * Configure features related to link power management.
+ */
+static void ata_dev_config_lpm(struct ata_device *dev)
+{
+ struct ata_port *ap = dev->link->ap;
+ unsigned int err_mask;
+
+ /*
+ * If the device port does not support Device Initiated Power Management
+ * (DIPM), and the device supports this feature, disable it.
+ */
+ if (ap->flags & ATA_FLAG_NO_DIPM && ata_id_has_dipm(dev->id)) {
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_DISABLE, SATA_DIPM);
+ if (err_mask && err_mask != AC_ERR_DEV)
+ ata_dev_err(dev, "Disable DIPM failed, Emask 0x%x\n",
+ err_mask);
+ }
+}
+
static void ata_dev_print_features(struct ata_device *dev)
{
if (!(dev->flags & ATA_DFLAG_FEATURES_MASK))
@@ -2963,6 +2984,7 @@ int ata_dev_configure(struct ata_device *dev)
ata_dev_config_chs(dev);
}
+ ata_dev_config_lpm(dev);
ata_dev_config_fua(dev);
ata_dev_config_devslp(dev);
ata_dev_config_sense_reporting(dev);
--
2.50.0
