This probably should have cc'd linux-api...
On Tue, Apr 08, 2025 at 10:41:58AM +0000, John Garry wrote:
> XFS will be able to support large atomic writes (atomic write > 1x block)
> in future. This will be achieved by using different operating methods,
> depending on the size of the write.
>
> Specifically a new method of operation based in FS atomic extent remapping
> will be supported in addition to the current HW offload-based method.
>
> The FS method will generally be appreciably slower performing than the
> HW-offload method. However the FS method will be typically able to
> contribute to achieving a larger atomic write unit max limit.
>
> XFS will support a hybrid mode, where HW offload method will be used when
> possible, i.e. HW offload is used when the length of the write is
> supported, and for other times FS-based atomic writes will be used.
>
> As such, there is an atomic write length at which the user may experience
> appreciably slower performance.
>
> Advertise this limit in a new statx field, stx_atomic_write_unit_max_opt.
>
> When zero, it means that there is no such performance boundary.
>
> Masks STATX{_ATTR}_WRITE_ATOMIC can be used to get this new field. This is
> ok for older kernels which don't support this new field, as they would
> report 0 in this field (from zeroing in cp_statx()) already. Furthermore
> those older kernels don't support large atomic writes - apart from block
> fops, but there would be consistent performance there for atomic writes
> in range [unit min, unit max].
>
> Signed-off-by: John Garry <john.g.garry@xxxxxxxxxx>
Seems fine to me, but I imagine others have stronger opinions.
Acked-by: "Darrick J. Wong" <djwong@xxxxxxxxxx>
--D
> ---
> block/bdev.c | 3 ++-
> fs/ext4/inode.c | 2 +-
> fs/stat.c | 6 +++++-
> fs/xfs/xfs_iops.c | 2 +-
> include/linux/fs.h | 3 ++-
> include/linux/stat.h | 1 +
> include/uapi/linux/stat.h | 8 ++++++--
> 7 files changed, 18 insertions(+), 7 deletions(-)
>
> diff --git a/block/bdev.c b/block/bdev.c
> index 4844d1e27b6f..b4afc1763e8e 100644
> --- a/block/bdev.c
> +++ b/block/bdev.c
> @@ -1301,7 +1301,8 @@ void bdev_statx(struct path *path, struct kstat *stat,
>
> generic_fill_statx_atomic_writes(stat,
> queue_atomic_write_unit_min_bytes(bd_queue),
> - queue_atomic_write_unit_max_bytes(bd_queue));
> + queue_atomic_write_unit_max_bytes(bd_queue),
> + 0);
> }
>
> stat->blksize = bdev_io_min(bdev);
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index 1dc09ed5d403..51a45699112c 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -5663,7 +5663,7 @@ int ext4_getattr(struct mnt_idmap *idmap, const struct path *path,
> awu_max = sbi->s_awu_max;
> }
>
> - generic_fill_statx_atomic_writes(stat, awu_min, awu_max);
> + generic_fill_statx_atomic_writes(stat, awu_min, awu_max, 0);
> }
>
> flags = ei->i_flags & EXT4_FL_USER_VISIBLE;
> diff --git a/fs/stat.c b/fs/stat.c
> index f13308bfdc98..c41855f62d22 100644
> --- a/fs/stat.c
> +++ b/fs/stat.c
> @@ -136,13 +136,15 @@ EXPORT_SYMBOL(generic_fill_statx_attr);
> * @stat: Where to fill in the attribute flags
> * @unit_min: Minimum supported atomic write length in bytes
> * @unit_max: Maximum supported atomic write length in bytes
> + * @unit_max_opt: Optimised maximum supported atomic write length in bytes
> *
> * Fill in the STATX{_ATTR}_WRITE_ATOMIC flags in the kstat structure from
> * atomic write unit_min and unit_max values.
> */
> void generic_fill_statx_atomic_writes(struct kstat *stat,
> unsigned int unit_min,
> - unsigned int unit_max)
> + unsigned int unit_max,
> + unsigned int unit_max_opt)
> {
> /* Confirm that the request type is known */
> stat->result_mask |= STATX_WRITE_ATOMIC;
> @@ -153,6 +155,7 @@ void generic_fill_statx_atomic_writes(struct kstat *stat,
> if (unit_min) {
> stat->atomic_write_unit_min = unit_min;
> stat->atomic_write_unit_max = unit_max;
> + stat->atomic_write_unit_max_opt = unit_max_opt;
> /* Initially only allow 1x segment */
> stat->atomic_write_segments_max = 1;
>
> @@ -732,6 +735,7 @@ cp_statx(const struct kstat *stat, struct statx __user *buffer)
> tmp.stx_atomic_write_unit_min = stat->atomic_write_unit_min;
> tmp.stx_atomic_write_unit_max = stat->atomic_write_unit_max;
> tmp.stx_atomic_write_segments_max = stat->atomic_write_segments_max;
> + tmp.stx_atomic_write_unit_max_opt = stat->atomic_write_unit_max_opt;
>
> return copy_to_user(buffer, &tmp, sizeof(tmp)) ? -EFAULT : 0;
> }
> diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
> index 756bd3ca8e00..f0e5d83195df 100644
> --- a/fs/xfs/xfs_iops.c
> +++ b/fs/xfs/xfs_iops.c
> @@ -610,7 +610,7 @@ xfs_report_atomic_write(
>
> if (xfs_inode_can_atomicwrite(ip))
> unit_min = unit_max = ip->i_mount->m_sb.sb_blocksize;
> - generic_fill_statx_atomic_writes(stat, unit_min, unit_max);
> + generic_fill_statx_atomic_writes(stat, unit_min, unit_max, 0);
> }
>
> STATIC int
> diff --git a/include/linux/fs.h b/include/linux/fs.h
> index 016b0fe1536e..7b19d8f99aff 100644
> --- a/include/linux/fs.h
> +++ b/include/linux/fs.h
> @@ -3475,7 +3475,8 @@ void generic_fillattr(struct mnt_idmap *, u32, struct inode *, struct kstat *);
> void generic_fill_statx_attr(struct inode *inode, struct kstat *stat);
> void generic_fill_statx_atomic_writes(struct kstat *stat,
> unsigned int unit_min,
> - unsigned int unit_max);
> + unsigned int unit_max,
> + unsigned int unit_max_opt);
> extern int vfs_getattr_nosec(const struct path *, struct kstat *, u32, unsigned int);
> extern int vfs_getattr(const struct path *, struct kstat *, u32, unsigned int);
> void __inode_add_bytes(struct inode *inode, loff_t bytes);
> diff --git a/include/linux/stat.h b/include/linux/stat.h
> index be7496a6a0dd..e3d00e7bb26d 100644
> --- a/include/linux/stat.h
> +++ b/include/linux/stat.h
> @@ -57,6 +57,7 @@ struct kstat {
> u32 dio_read_offset_align;
> u32 atomic_write_unit_min;
> u32 atomic_write_unit_max;
> + u32 atomic_write_unit_max_opt;
> u32 atomic_write_segments_max;
> };
>
> diff --git a/include/uapi/linux/stat.h b/include/uapi/linux/stat.h
> index f78ee3670dd5..1686861aae20 100644
> --- a/include/uapi/linux/stat.h
> +++ b/include/uapi/linux/stat.h
> @@ -182,8 +182,12 @@ struct statx {
> /* File offset alignment for direct I/O reads */
> __u32 stx_dio_read_offset_align;
>
> - /* 0xb8 */
> - __u64 __spare3[9]; /* Spare space for future expansion */
> + /* Optimised max atomic write unit in bytes */
> + __u32 stx_atomic_write_unit_max_opt;
> + __u32 __spare2[1];
> +
> + /* 0xc0 */
> + __u64 __spare3[8]; /* Spare space for future expansion */
>
> /* 0x100 */
> };
> --
> 2.31.1
>
>
