From: Nuno Sá <nuno.sa@xxxxxxxxxx>
The LTC4283 device has up to 8 pins that can be configured as GPIOs.
Note that PGIO pins are not set as GPIOs by default so if they are
configured to be used as GPIOs we need to make sure to initialize them
to a sane default. They are set as inputs by default.
Signed-off-by: Nuno Sá <nuno.sa@xxxxxxxxxx>
---
MAINTAINERS | 2 +
drivers/gpio/Kconfig | 10 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-ltc4283.c | 217 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 230 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 10f7869bc8d91a093d841b9e4229566b08f0eec0..6b898c57d94e186787444506623e04b6f024cfa3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14502,9 +14502,11 @@ F: drivers/hwmon/ltc4282.c
LTC4283 HARDWARE MONITOR AND GPIO DRIVER
M: Nuno Sá <nuno.sa@xxxxxxxxxx>
+L: linux-gpio@xxxxxxxxxxxxxxx
L: linux-hwmon@xxxxxxxxxxxxxxx
S: Supported
F: Documentation/devicetree/bindings/hwmon/adi,ltc4283.yaml
+F: drivers/gpio/gpio-ltc4283.c
F: drivers/hwmon/ltc4283.c
LTC4286 HARDWARE MONITOR DRIVER
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e43abb322fa6e15f19f2f498aa5adea03e6cd3bf..0273b0f8944b634f14141aac4d99f502d03b3a32 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -461,6 +461,16 @@ config GPIO_LPC32XX
Select this option to enable GPIO driver for
NXP LPC32XX devices.
+config GPIO_LTC4283
+ tristate "Analog Devices LTC4283 GPIO support"
+ depends on SENSORS_LTC4283
+ help
+ If you say yes here you want the GPIO function available in Analog
+ Devices LTC4283 Negative Voltage Hot Swap Controller.
+
+ This driver can also be built as a module. If so, the module will
+ be called gpio-ltc4283.
+
config GPIO_MB86S7X
tristate "GPIO support for Fujitsu MB86S7x Platforms"
help
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 379f55e9ed1e69cd9c5745f8643541b85953db1c..513f2b5c82ccff3a1da855d45abb5ad6abf5a14e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_GPIO_LP873X) += gpio-lp873x.o
obj-$(CONFIG_GPIO_LP87565) += gpio-lp87565.o
obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
obj-$(CONFIG_GPIO_LPC32XX) += gpio-lpc32xx.o
+obj-$(CONFIG_GPIO_LTC4283) += gpio-ltc4283.o
obj-$(CONFIG_GPIO_MACSMC) += gpio-macsmc.o
obj-$(CONFIG_GPIO_MADERA) += gpio-madera.o
obj-$(CONFIG_GPIO_MAX3191X) += gpio-max3191x.o
diff --git a/drivers/gpio/gpio-ltc4283.c b/drivers/gpio/gpio-ltc4283.c
new file mode 100644
index 0000000000000000000000000000000000000000..885af67146a87c62b5a315624282c523ee54bee0
--- /dev/null
+++ b/drivers/gpio/gpio-ltc4283.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Analog Devices LTC4283 GPIO driver
+ *
+ * Copyright 2025 Analog Devices Inc.
+ */
+#include <linux/auxiliary_bus.h>
+#include <linux/bitmap.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/regmap.h>
+
+#define LTC4283_PINS_MAX 8
+#define LTC4283_PGIOX_START_NR 4
+#define LTC4283_INPUT_STATUS 0x02
+#define LTC4283_PGIO_CONFIG 0x10
+#define LTC4283_PGIO_CFG_MASK(pin) \
+ GENMASK(((pin) - LTC4283_PGIOX_START_NR) * 2 + 1, (((pin) - LTC4283_PGIOX_START_NR) * 2))
+#define LTC4283_PGIO_CONFIG_2 0x11
+
+#define LTC42823_ADIO_CONFIG 0x12
+/* starts at bit 4 */
+#define LTC4283_ADIOX_CONFIG_MASK(pin) BIT((pin) + 4)
+#define LTC4283_PGIO_DIR_IN 3
+#define LTC4283_PGIO_DIR_OUT 2
+
+/* Non-constant mask variant of FIELD_GET() and FIELD_PREP() */
+#define field_get(_mask, _reg) (((_reg) & (_mask)) >> (ffs(_mask) - 1))
+#define field_prep(_mask, _val) (((_val) << (ffs(_mask) - 1)) & (_mask))
+
+struct ltc4283_gpio {
+ struct gpio_chip gpio_chip;
+ struct regmap *regmap;
+};
+
+static int ltc4283_pgio_get_direction(const struct ltc4283_gpio *st, unsigned int off)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(st->regmap, LTC4283_PGIO_CONFIG, &val);
+ if (ret)
+ return ret;
+
+ val = field_get(LTC4283_PGIO_CFG_MASK(off), val);
+ if (val == LTC4283_PGIO_DIR_IN)
+ return GPIO_LINE_DIRECTION_IN;
+
+ return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int ltc4283_gpio_get_direction(struct gpio_chip *gc, unsigned int off)
+{
+ struct ltc4283_gpio *st = gpiochip_get_data(gc);
+ unsigned int val;
+ int ret;
+
+ if (off >= LTC4283_PGIOX_START_NR)
+ return ltc4283_pgio_get_direction(st, off);
+
+ ret = regmap_read(st->regmap, LTC42823_ADIO_CONFIG, &val);
+ if (ret)
+ return ret;
+
+ if (val & LTC4283_ADIOX_CONFIG_MASK(off))
+ return GPIO_LINE_DIRECTION_IN;
+
+ return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int ltc4283_gpio_direction_set(const struct ltc4283_gpio *st,
+ unsigned int off, bool input)
+{
+ if (off >= LTC4283_PGIOX_START_NR) {
+ unsigned int val = LTC4283_PGIO_DIR_OUT;
+
+ if (input)
+ val = LTC4283_PGIO_DIR_IN;
+
+ val = field_prep(LTC4283_PGIO_CFG_MASK(off), val);
+ return regmap_update_bits(st->regmap, LTC4283_PGIO_CONFIG,
+ LTC4283_PGIO_CFG_MASK(off), val);
+ }
+
+ return regmap_update_bits(st->regmap, LTC42823_ADIO_CONFIG,
+ LTC4283_ADIOX_CONFIG_MASK(off),
+ field_prep(LTC4283_ADIOX_CONFIG_MASK(off), input));
+}
+
+static int __ltc4283_gpio_set_value(const struct ltc4283_gpio *st,
+ unsigned int off, int val)
+{
+ u32 reg = off < LTC4283_PGIOX_START_NR ? LTC42823_ADIO_CONFIG : LTC4283_PGIO_CONFIG_2;
+
+ return regmap_update_bits(st->regmap, reg, BIT(off),
+ field_prep(BIT(off), !!val));
+}
+
+static int ltc4283_gpio_direction_input(struct gpio_chip *gc, unsigned int off)
+{
+ struct ltc4283_gpio *st = gpiochip_get_data(gc);
+
+ return ltc4283_gpio_direction_set(st, off, true);
+}
+
+static int ltc4283_gpio_direction_output(struct gpio_chip *gc, unsigned int off, int val)
+{
+ struct ltc4283_gpio *st = gpiochip_get_data(gc);
+ int ret;
+
+ ret = ltc4283_gpio_direction_set(st, off, false);
+ if (ret)
+ return ret;
+
+ return __ltc4283_gpio_set_value(st, off, val);
+}
+
+static int ltc4283_gpio_get_value(struct gpio_chip *gc, unsigned int off)
+{
+ struct ltc4283_gpio *st = gpiochip_get_data(gc);
+ unsigned int val, reg;
+ int ret, dir;
+
+ dir = ltc4283_gpio_get_direction(gc, off);
+ if (dir < 0)
+ return dir;
+
+ if (dir == GPIO_LINE_DIRECTION_IN) {
+ ret = regmap_read(st->regmap, LTC4283_INPUT_STATUS, &val);
+ if (ret)
+ return ret;
+
+ /* ADIO1 is at bit 3. */
+ if (off < LTC4283_PGIOX_START_NR)
+ return !!(val & BIT(3 - off));
+
+ /* PGIO1 is at bit 7. */
+ return !!(val & BIT(7 - (off - LTC4283_PGIOX_START_NR)));
+ }
+
+ if (off < LTC4283_PGIOX_START_NR)
+ reg = LTC42823_ADIO_CONFIG;
+ else
+ reg = LTC4283_PGIO_CONFIG_2;
+
+ ret = regmap_read(st->regmap, reg, &val);
+ if (ret)
+ return ret;
+
+ return !!(val & BIT(off));
+}
+
+static int ltc4283_gpio_set_value(struct gpio_chip *gc, unsigned int off, int val)
+{
+ struct ltc4283_gpio *st = gpiochip_get_data(gc);
+
+ return __ltc4283_gpio_set_value(st, off, val);
+}
+
+static int ltc4283_init_valid_mask(struct gpio_chip *gc, unsigned long *valid_mask,
+ unsigned int ngpios)
+{
+ unsigned long *mask = dev_get_platdata(gc->parent);
+
+ bitmap_copy(valid_mask, mask, ngpios);
+ return 0;
+}
+
+static int ltc4283_gpio_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct device *dev = &adev->dev;
+ struct ltc4283_gpio *st;
+ struct gpio_chip *gc;
+
+ st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
+ if (!st)
+ return -ENOMEM;
+
+ st->regmap = dev_get_regmap(dev->parent, NULL);
+
+ gc = &st->gpio_chip;
+ gc->parent = dev;
+ gc->get_direction = ltc4283_gpio_get_direction;
+ gc->direction_input = ltc4283_gpio_direction_input;
+ gc->direction_output = ltc4283_gpio_direction_output;
+ gc->get = ltc4283_gpio_get_value;
+ gc->set = ltc4283_gpio_set_value;
+ gc->init_valid_mask = ltc4283_init_valid_mask;
+ gc->can_sleep = true;
+
+ gc->base = -1;
+ gc->ngpio = LTC4283_PINS_MAX;
+ gc->label = adev->name;
+ gc->owner = THIS_MODULE;
+
+ return devm_gpiochip_add_data(dev, &st->gpio_chip, st);
+}
+
+static const struct auxiliary_device_id ltc4283_aux_id_table[] = {
+ { "ltc4283.gpio" },
+ { }
+};
+MODULE_DEVICE_TABLE(auxiliary, ltc4283_aux_id_table);
+
+static struct auxiliary_driver ltc4283_gpio_driver = {
+ .probe = ltc4283_gpio_probe,
+ .id_table = ltc4283_aux_id_table,
+};
+module_auxiliary_driver(ltc4283_gpio_driver);
+
+MODULE_AUTHOR("Nuno Sá <nuno.sa@xxxxxxxxxx>");
+MODULE_DESCRIPTION("GPIO LTC4283 Driver");
+MODULE_LICENSE("GPL");
--
2.51.0
