On Sun Sep 7, 2025 at 5:19 PM -05, Guenter Roeck wrote: > On 9/7/25 15:06, Kurt Borja wrote: >> All sht2x chips share the same communication protocol so add support for >> them. >> >> Cc: stable@xxxxxxxxxxxxxxx >> Signed-off-by: Kurt Borja <kuurtb@xxxxxxxxx> >> --- >> Documentation/hwmon/sht21.rst | 11 +++++++++++ >> drivers/hwmon/sht21.c | 3 +++ >> 2 files changed, 14 insertions(+) >> >> diff --git a/Documentation/hwmon/sht21.rst b/Documentation/hwmon/sht21.rst >> index 1bccc8e8aac8d3532ec17dcdbc6a172102877085..65f85ca68ecac1cba6ad23f783fd648305c40927 100644 >> --- a/Documentation/hwmon/sht21.rst >> +++ b/Documentation/hwmon/sht21.rst >> @@ -2,6 +2,17 @@ Kernel driver sht21 >> =================== >> >> Supported chips: >> + * Sensirion SHT20 >> + >> + Prefix: 'sht20' >> + >> + Addresses scanned: none >> + >> + Datasheet: Publicly available at the Sensirion website >> + >> + https://www.sensirion.com/file/datasheet_sht20 >> + >> + > > Too many empty lines. The next entries are also separated by 3 lines. I did it like that for symmetry. > > Please add SHT20 to Kconfig as well. Sure! > >> >> * Sensirion SHT21 >> >> diff --git a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c >> index 97327313529b467ed89d8f6b06c2d78efd54efbf..a2748659edc262dac9d87771f849a4fc0a29d981 100644 >> --- a/drivers/hwmon/sht21.c >> +++ b/drivers/hwmon/sht21.c >> @@ -275,7 +275,10 @@ static int sht21_probe(struct i2c_client *client) >> >> /* Device ID table */ >> static const struct i2c_device_id sht21_id[] = { >> + { "sht20" }, >> { "sht21" }, >> + { "sht25" }, >> + { "sht2x" }, > > AFAICS there is no sht2x chip. > > >> { } >> }; >> MODULE_DEVICE_TABLE(i2c, sht21_id); >> -- ~ Kurt
