On Thu, 14 Aug 2025 11:52:23 +0100, Nuno Sá wrote: > The LTC4283 is a negative voltage hot swap controller that drives an > external N-channel MOSFET to allow a board to be safely inserted and > removed from a live backplane. > > Main usage is as an Hardware Monitoring device. However, it has up to 8 > pins that can be configured and used as GPIOs and hence, the device can > also be a GPIO controller. > > Signed-off-by: Nuno Sá <nuno.sa@xxxxxxxxxx> > --- > .../devicetree/bindings/mfd/adi,ltc4283.yaml | 85 ++++++++++++++++++++++ > MAINTAINERS | 7 ++ > 2 files changed, 92 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/adi,ltc4283.yaml: Error in referenced schema matching $id: http://devicetree.org/schemas/gpio/adi,ltc4283.yaml Tried these paths (check schema $id if path is wrong): /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpio/adi,ltc4283.yaml /usr/local/lib/python3.13/dist-packages/dtschema/schemas/gpio/adi,ltc4283.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/adi,ltc4283.example.dtb: swap-controller@15 (adi,ltc4283): gpio: {'compatible': ['adi,ltc4283-gpio'], 'gpio-controller': True, '#gpio-cells': 2} should not be valid under {'description': "Can't find referenced schema: http://devicetree.org/schemas/gpio/adi,ltc4283.yaml#"} from schema $id: http://devicetree.org/schemas/mfd/adi,ltc4283.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/adi,ltc4283.example.dtb: swap-controller@15 (adi,ltc4283): hwmon: {'compatible': ['adi,ltc4283-hwmon'], 'adi,rsense-nano-ohms': [500], 'adi,current-limit-sense-microvolt': [[25000]], 'adi,current-limit-foldback-factor': [10], 'adi,cooling-delay-ms': [8190], 'adi,fet-bad-timer-delay-ms': [512]} should not be valid under {'description': "Can't find referenced schema: http://devicetree.org/schemas/hwmon/adi,ltc4283.yaml#"} from schema $id: http://devicetree.org/schemas/mfd/adi,ltc4283.yaml# Documentation/devicetree/bindings/mfd/adi,ltc4283.example.dtb: /example-0/i2c/swap-controller@15/gpio: failed to match any schema with compatible: ['adi,ltc4283-gpio'] Documentation/devicetree/bindings/mfd/adi,ltc4283.example.dtb: /example-0/i2c/swap-controller@15/hwmon: failed to match any schema with compatible: ['adi,ltc4283-hwmon'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250814-ltc4283-support-v1-1-88b2cef773f2@xxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
