On Fri, Jul 25, 2025 at 11:55:54AM +0300, Nikolay Aleksandrov wrote: > On 7/24/25 11:16, Hangbin Liu wrote: > > Introduce a new option ad_actor_port_prio, allowing users to set the actor > > port priority on a per-port basis in LACPDU. > > > > This priority can be used in future enhancements to influence aggregator > > selection via ad_select policy. > > > > Signed-off-by: Hangbin Liu <liuhangbin@xxxxxxxxx> > > --- > > Documentation/networking/bonding.rst | 9 +++++++ > > drivers/net/bonding/bond_3ad.c | 2 ++ > > drivers/net/bonding/bond_netlink.c | 16 +++++++++++++ > > drivers/net/bonding/bond_options.c | 35 ++++++++++++++++++++++++++++ > > include/net/bond_3ad.h | 1 + > > include/net/bond_options.h | 1 + > > include/uapi/linux/if_link.h | 1 + > > 7 files changed, 65 insertions(+) > > > > diff --git a/Documentation/networking/bonding.rst b/Documentation/networking/bonding.rst > > index a4c1291d2561..5e105e7ac8e6 100644 > > --- a/Documentation/networking/bonding.rst > > +++ b/Documentation/networking/bonding.rst > > @@ -193,6 +193,15 @@ ad_actor_sys_prio > > This parameter has effect only in 802.3ad mode and is available through > > SysFs interface. > > > > +ad_actor_port_prio > > + > > + In an AD system, this specifies the port priority. The allowed range > > + is 1 - 65535. If the value is not specified, it takes 255 as the > > > Leaving this as a note: it is set to 255 because actor_port_priorty is initialized to 255 > and port_priority is initialized to actor_port_priority at slave > bind time. Hi Nikolay, Is this a note for you? Or you want me add it to the doc? Thanks Hangbin
