On 21/07/2025 12:32, Dong Yibo wrote:
Initialize basic mbx function.
Signed-off-by: Dong Yibo <dong100@xxxxxxxxx>
---
drivers/net/ethernet/mucse/rnpgbe/Makefile | 5 +-
drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h | 46 ++
.../net/ethernet/mucse/rnpgbe/rnpgbe_chip.c | 5 +-
drivers/net/ethernet/mucse/rnpgbe/rnpgbe_hw.h | 2 +
.../net/ethernet/mucse/rnpgbe/rnpgbe_main.c | 1 +
.../net/ethernet/mucse/rnpgbe/rnpgbe_mbx.c | 623 ++++++++++++++++++
.../net/ethernet/mucse/rnpgbe/rnpgbe_mbx.h | 48 ++
7 files changed, 727 insertions(+), 3 deletions(-)
create mode 100644 drivers/net/ethernet/mucse/rnpgbe/rnpgbe_mbx.c
create mode 100644 drivers/net/ethernet/mucse/rnpgbe/rnpgbe_mbx.h
diff --git a/drivers/net/ethernet/mucse/rnpgbe/Makefile b/drivers/net/ethernet/mucse/rnpgbe/Makefile
index 42c359f459d9..41177103b50c 100644
--- a/drivers/net/ethernet/mucse/rnpgbe/Makefile
+++ b/drivers/net/ethernet/mucse/rnpgbe/Makefile
@@ -5,5 +5,6 @@
#
obj-$(CONFIG_MGBE) += rnpgbe.o
-rnpgbe-objs := rnpgbe_main.o\
- rnpgbe_chip.o
+rnpgbe-objs := rnpgbe_main.o \
+ rnpgbe_chip.o \
+ rnpgbe_mbx.o
diff --git a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h
index 2ae836fc8951..46e2bb2fe71e 100644
--- a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h
+++ b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h
@@ -63,9 +63,51 @@ struct mucse_mac_info {
int clk_csr;
};
+struct mucse_hw;
+
+enum MBX_ID {
+ MBX_VF0 = 0,
+ MBX_VF1,
+ MBX_VF2,
+ MBX_VF3,
+ MBX_VF4,
+ MBX_VF5,
+ MBX_VF6,
+ MBX_VF7,
+ MBX_CM3CPU,
+ MBX_FW = MBX_CM3CPU,
+ MBX_VFCNT
+};
+
+struct mucse_mbx_operations {
+ void (*init_params)(struct mucse_hw *hw);
+ int (*read)(struct mucse_hw *hw, u32 *msg,
+ u16 size, enum MBX_ID id);
+ int (*write)(struct mucse_hw *hw, u32 *msg,
+ u16 size, enum MBX_ID id);
+ int (*read_posted)(struct mucse_hw *hw, u32 *msg,
+ u16 size, enum MBX_ID id);
+ int (*write_posted)(struct mucse_hw *hw, u32 *msg,
+ u16 size, enum MBX_ID id);
+ int (*check_for_msg)(struct mucse_hw *hw, enum MBX_ID id);
+ int (*check_for_ack)(struct mucse_hw *hw, enum MBX_ID id);
+ void (*configure)(struct mucse_hw *hw, int num_vec,
+ bool enable);
+};
+
+struct mucse_mbx_stats {
+ u32 msgs_tx;
+ u32 msgs_rx;
+ u32 acks;
+ u32 reqs;
+ u32 rsts;
+};
+
#define MAX_VF_NUM (8)
struct mucse_mbx_info {
+ struct mucse_mbx_operations ops;
+ struct mucse_mbx_stats stats;
u32 timeout;
u32 usec_delay;
u32 v2p_mailbox;
@@ -99,6 +141,8 @@ struct mucse_mbx_info {
int share_size;
};
+#include "rnpgbe_mbx.h"
+
struct mucse_hw {
void *back;
u8 pfvfnum;
@@ -110,6 +154,8 @@ struct mucse_hw {
u16 vendor_id;
u16 subsystem_device_id;
u16 subsystem_vendor_id;
+ int max_vfs;
+ int max_vfs_noari;
enum rnpgbe_hw_type hw_type;
struct mucse_dma_info dma;
struct mucse_eth_info eth;
diff --git a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_chip.c b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_chip.c
index 38c094965db9..b0e5fda632f3 100644
--- a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_chip.c
+++ b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_chip.c
@@ -6,6 +6,7 @@
#include "rnpgbe.h"
#include "rnpgbe_hw.h"
+#include "rnpgbe_mbx.h"
/**
* rnpgbe_get_invariants_n500 - setup for hw info
@@ -67,7 +68,7 @@ static void rnpgbe_get_invariants_n500(struct mucse_hw *hw)
mbx->fw_pf_mbox_mask = 0x2e200;
mbx->fw_vf_share_ram = 0x2b000;
mbx->share_size = 512;
-
+ memcpy(&hw->mbx.ops, &mucse_mbx_ops_generic, sizeof(hw->mbx.ops));
that's bad pattern. it's better to have a constant set of callbacks per
device type and assign const pointer to it. It will make further debugs
much easier.
/* setup net feature here */
hw->feature_flags |= M_NET_FEATURE_SG |
M_NET_FEATURE_TX_CHECKSUM |
@@ -83,6 +84,7 @@ static void rnpgbe_get_invariants_n500(struct mucse_hw *hw)
M_NET_FEATURE_STAG_OFFLOAD;
/* start the default ahz, update later */
hw->usecstocount = 125;
+ hw->max_vfs = 7;
}
/**
@@ -117,6 +119,7 @@ static void rnpgbe_get_invariants_n210(struct mucse_hw *hw)
/* update hw feature */
hw->feature_flags |= M_HW_FEATURE_EEE;
hw->usecstocount = 62;
+ hw->max_vfs_noari = 7;
}
const struct rnpgbe_info rnpgbe_n500_info = {
diff --git a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_hw.h b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_hw.h
index 2c7372a5e88d..ff7bd9b21550 100644
--- a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_hw.h
+++ b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_hw.h
@@ -14,6 +14,8 @@
#define RNPGBE_RING_BASE (0x1000)
#define RNPGBE_MAC_BASE (0x20000)
#define RNPGBE_ETH_BASE (0x10000)
+
+#define RNPGBE_DMA_DUMY (0x000c)
/* chip resourse */
#define RNPGBE_MAX_QUEUES (8)
/* multicast control table */
diff --git a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c
index 08f773199e9b..1e8360cae560 100644
--- a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c
+++ b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c
@@ -114,6 +114,7 @@ static int rnpgbe_add_adapter(struct pci_dev *pdev,
hw->hw_addr = hw_addr;
hw->dma.dma_version = dma_version;
ii->get_invariants(hw);
+ hw->mbx.ops.init_params(hw);
return 0;
diff --git a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_mbx.c b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_mbx.c
new file mode 100644
index 000000000000..56ace3057fea
--- /dev/null
+++ b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_mbx.c
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2022 - 2025 Mucse Corporation. */
+
+#include <linux/pci.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include "rnpgbe.h"
+#include "rnpgbe_mbx.h"
+#include "rnpgbe_hw.h"
+
+/**
+ * mucse_read_mbx - Reads a message from the mailbox
+ * @hw: Pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: Id of vf/fw to read
+ *
+ * @return: 0 on success, negative on failure
+ **/
+int mucse_read_mbx(struct mucse_hw *hw, u32 *msg, u16 size,
+ enum MBX_ID mbx_id)
+{
+ struct mucse_mbx_info *mbx = &hw->mbx;
+
+ /* limit read to size of mailbox */
+ if (size > mbx->size)
+ size = mbx->size;
+
+ if (!mbx->ops.read)
+ return -EIO;
is it even possible? you control the set of callbacks, and these
operations must be setup to have HW working. avoid defensive programming
here and in other places you use callbacks.
+
+ return mbx->ops.read(hw, msg, size, mbx_id);
+}
+
[...]
