On Tue, 1 Jul 2025 09:50:11 +0200 Kamil Horák - 2N wrote: > PATCH 1 - Add MII-Lite PHY interface mode as defined by Broadcom for > their two-wire PHYs. It can be used with most Ethernet controllers > under certain limitations (no half-duplex link modes etc.). > > PATCH 2 - Add MII-Lite PHY interface type > > PATCH 3 - Activation of MII-Lite interface mode on Broadcom bcm5481x > PHYs > > PATCH 4 - Fix the BCM54811 PHY initialization so that it conforms > to the datasheet regarding a reserved bit in the LRE Control > register, which must be written to zero after every device reset. > Also fix the LRE Status register reading, there is another bit to > be ignored on bcm54811. I'm a bit lost why the first 3 patches are included in a series for net. My naive reading is we didn't support this extra mode, now we do, which sounds like a new feature.. Patch 4, sure, but the dependency is not obvious.
