Hello:
This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:
On Thu, 26 Jun 2025 15:52:16 +0200 you wrote:
> The device may support the Reference SYNC feature, which allows the
> combination of two inputs into a input pair. In this configuration,
> clock signals from both inputs are used to synchronize the DPLL device.
> The higher frequency signal is utilized for the loop bandwidth of the DPLL,
> while the lower frequency signal is used to syntonize the output signal of
> the DPLL device. This feature enables the provision of a high-quality loop
> bandwidth signal from an external source.
>
> [...]
Here is the summary with links:
- [net-next,v7,1/3] dpll: add reference-sync netlink attribute
https://git.kernel.org/netdev/net-next/c/7f15ee35972d
- [net-next,v7,2/3] dpll: add reference sync get/set
https://git.kernel.org/netdev/net-next/c/58256a26bfb3
- [net-next,v7,3/3] ice: add ref-sync dpll pins
https://git.kernel.org/netdev/net-next/c/5bcea241335b
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
