On 6/22/25 11:40 PM, Alok Tiwari wrote:
> Corrected a typo error in the NVMe status code constant from
> NVME_SC_SELT_TEST_IN_PROGRESS to NVME_SC_SELF_TEST_IN_PROGRESS to
> accurately reflect its meaning.
>
> Signed-off-by: Alok Tiwari <alok.a.tiwari@xxxxxxxxxx>
Reviewed-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Thanks.
> ---
> drivers/nvme/host/constants.c | 4 ++--
> include/linux/nvme.h | 2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/nvme/host/constants.c b/drivers/nvme/host/constants.c
> index 1a0058be58210..dc90df9e13a21 100644
> --- a/drivers/nvme/host/constants.c
> +++ b/drivers/nvme/host/constants.c
> @@ -133,7 +133,7 @@ static const char * const nvme_statuses[] = {
> [NVME_SC_NS_NOT_ATTACHED] = "Namespace Not Attached",
> [NVME_SC_THIN_PROV_NOT_SUPP] = "Thin Provisioning Not Supported",
> [NVME_SC_CTRL_LIST_INVALID] = "Controller List Invalid",
> - [NVME_SC_SELT_TEST_IN_PROGRESS] = "Device Self-test In Progress",
> + [NVME_SC_SELF_TEST_IN_PROGRESS] = "Device Self-test In Progress",
> [NVME_SC_BP_WRITE_PROHIBITED] = "Boot Partition Write Prohibited",
> [NVME_SC_CTRL_ID_INVALID] = "Invalid Controller Identifier",
> [NVME_SC_SEC_CTRL_STATE_INVALID] = "Invalid Secondary Controller State",
> @@ -145,7 +145,7 @@ static const char * const nvme_statuses[] = {
> [NVME_SC_BAD_ATTRIBUTES] = "Conflicting Attributes",
> [NVME_SC_INVALID_PI] = "Invalid Protection Information",
> [NVME_SC_READ_ONLY] = "Attempted Write to Read Only Range",
> - [NVME_SC_CMD_SIZE_LIM_EXCEEDED ] = "Command Size Limits Exceeded",
> + [NVME_SC_CMD_SIZE_LIM_EXCEEDED] = "Command Size Limits Exceeded",
> [NVME_SC_ZONE_BOUNDARY_ERROR] = "Zoned Boundary Error",
> [NVME_SC_ZONE_FULL] = "Zone Is Full",
> [NVME_SC_ZONE_READ_ONLY] = "Zone Is Read Only",
> diff --git a/include/linux/nvme.h b/include/linux/nvme.h
> index b65a1b9f2116c..655d194f8e722 100644
> --- a/include/linux/nvme.h
> +++ b/include/linux/nvme.h
> @@ -2155,7 +2155,7 @@ enum {
> NVME_SC_NS_NOT_ATTACHED = 0x11a,
> NVME_SC_THIN_PROV_NOT_SUPP = 0x11b,
> NVME_SC_CTRL_LIST_INVALID = 0x11c,
> - NVME_SC_SELT_TEST_IN_PROGRESS = 0x11d,
> + NVME_SC_SELF_TEST_IN_PROGRESS = 0x11d,
> NVME_SC_BP_WRITE_PROHIBITED = 0x11e,
> NVME_SC_CTRL_ID_INVALID = 0x11f,
> NVME_SC_SEC_CTRL_STATE_INVALID = 0x120,
--
~Randy
