Configure DDRPERFM node on stm32mp257f-ev1 board.
Disable the node as DDRPERFM will produce an error message if it's clock
(shared with the DDRCTRL on STM32MP25x) is secured by common bootloaders.
Signed-off-by: Clément Le Goffic <clement.legoffic@xxxxxxxxxxx>
---
arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 2f561ad40665..a48fb7b33198 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -123,6 +123,11 @@ csi_source: endpoint {
};
};
+&ddrperfm {
+ st,dram-type = <2>;
+ status = "disabled";
+};
+
&dcmipp {
status = "okay";
port {
--
2.43.0
