Changes in v2:
- Deleted space before colon for consistency
- Standardized more boolean representation (0/1 with enabled/disabled)
Signed-off-by: Abdelrahman Fekry <abdelrahmanfekry375@xxxxxxxxx>
---
Documentation/networking/ip-sysctl.rst | 47 ++++++++++++++++++++------
1 file changed, 37 insertions(+), 10 deletions(-)
diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst
index 0f1251cce314..68778532faa5 100644
--- a/Documentation/networking/ip-sysctl.rst
+++ b/Documentation/networking/ip-sysctl.rst
@@ -8,14 +8,16 @@ IP Sysctl
==============================
ip_forward - BOOLEAN
- - 0 - disabled (default)
- - not 0 - enabled
+ - 0 (disabled)
+ - not 0 (enabled)
Forward Packets between interfaces.
This variable is special, its change resets all configuration
parameters to their default state (RFC1122 for hosts, RFC1812
for routers)
+
+ Default: 0 (disabled)
ip_default_ttl - INTEGER
Default value of TTL field (Time To Live) for outgoing (but not
@@ -75,7 +77,7 @@ fwmark_reflect - BOOLEAN
If unset, these packets have a fwmark of zero. If set, they have the
fwmark of the packet they are replying to.
- Default: 0
+ Default: 0 (disabled)
fib_multipath_use_neigh - BOOLEAN
Use status of existing neighbor entry when determining nexthop for
@@ -368,7 +370,7 @@ tcp_autocorking - BOOLEAN
queue. Applications can still use TCP_CORK for optimal behavior
when they know how/when to uncork their sockets.
- Default : 1
+ Default: 1 (enabled)
tcp_available_congestion_control - STRING
Shows the available congestion control choices that are registered.
@@ -407,6 +409,12 @@ tcp_congestion_control - STRING
tcp_dsack - BOOLEAN
Allows TCP to send "duplicate" SACKs.
+
+ Possible values:
+ - 0 (disabled)
+ - 1 (enabled)
+
+ Default: 1 (enabled)
tcp_early_retrans - INTEGER
Tail loss probe (TLP) converts RTOs occurring due to tail
@@ -623,6 +631,8 @@ tcp_no_metrics_save - BOOLEAN
increases overall performance, but may sometimes cause performance
degradation. If set, TCP will not cache metrics on closing
connections.
+
+ Default: 0 (disabled)
tcp_no_ssthresh_metrics_save - BOOLEAN
Controls whether TCP saves ssthresh metrics in the route cache.
@@ -684,6 +694,8 @@ tcp_retrans_collapse - BOOLEAN
Bug-to-bug compatibility with some broken printers.
On retransmit try to send bigger packets to work around bugs in
certain TCP stacks.
+
+ Default: 1 (enabled)
tcp_retries1 - INTEGER
This value influences the time, after which TCP decides, that
@@ -739,6 +751,8 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
tcp_sack - BOOLEAN
Enable select acknowledgments (SACKS).
+
+ Default: 1 (enabled)
tcp_comp_sack_delay_ns - LONG INTEGER
TCP tries to reduce number of SACK sent, using a timer
@@ -766,7 +780,7 @@ tcp_backlog_ack_defer - BOOLEAN
one ACK for the whole queue. This helps to avoid potential
long latencies at end of a TCP socket syscall.
- Default : true
+ Default: 1 (enabled)
tcp_slow_start_after_idle - BOOLEAN
If set, provide RFC2861 behavior and time out the congestion
@@ -781,7 +795,7 @@ tcp_stdurg - BOOLEAN
Most hosts use the older BSD interpretation, so if you turn this on
Linux might not communicate correctly with them.
- Default: FALSE
+ Default: 0 (disabled)
tcp_synack_retries - INTEGER
Number of times SYNACKs for a passive TCP connection attempt will
@@ -1018,6 +1032,10 @@ tcp_tw_reuse_delay - UNSIGNED INTEGER
tcp_window_scaling - BOOLEAN
Enable window scaling as defined in RFC1323.
+ - 0 (disabled)
+ - 1 (enabled)
+
+ Default: 1 (enabled)
tcp_shrink_window - BOOLEAN
This changes how the TCP receive window is calculated.
@@ -1160,7 +1178,7 @@ tcp_plb_enabled - BOOLEAN
congestion measure (e.g. ce_ratio). PLB needs a congestion measure to
make repathing decisions.
- Default: FALSE
+ Default: 0 (disabled)
tcp_plb_idle_rehash_rounds - INTEGER
Number of consecutive congested rounds (RTT) seen after which
@@ -1352,7 +1370,7 @@ cipso_rbm_optfmt - BOOLEAN
Default: 0
-cipso_rbm_structvalid - BOOLEAN
+cipso_rbm_strictvalid - BOOLEAN
If set, do a very strict check of the CIPSO option when
ip_options_compile() is called. If unset, relax the checks done during
ip_options_compile(). Either way is "safe" as errors are caught else
@@ -1543,7 +1561,7 @@ icmp_ignore_bogus_error_responses - BOOLEAN
If this is set to TRUE, the kernel will not give such warnings, which
will avoid log file clutter.
- Default: 1
+ Default: 1 (enabled)
icmp_errors_use_inbound_ifaddr - BOOLEAN
@@ -1560,7 +1578,7 @@ icmp_errors_use_inbound_ifaddr - BOOLEAN
then the primary address of the first non-loopback interface that
has one will be used regardless of this setting.
- Default: 0
+ Default: 0 (disabled)
igmp_max_memberships - INTEGER
Change the maximum number of multicast groups we can subscribe to.
@@ -1933,10 +1951,15 @@ mcast_resolicit - INTEGER
disable_policy - BOOLEAN
Disable IPSEC policy (SPD) for this interface
+
+ Default: 0
+
disable_xfrm - BOOLEAN
Disable IPSEC encryption on this interface, whatever the policy
+ Default: 0
+
igmpv2_unsolicited_report_interval - INTEGER
The interval in milliseconds in which the next unsolicited
IGMPv1 or IGMPv2 report retransmit will take place.
@@ -1951,11 +1974,15 @@ igmpv3_unsolicited_report_interval - INTEGER
ignore_routes_with_linkdown - BOOLEAN
Ignore routes whose link is down when performing a FIB lookup.
+
+ Default: 0 (disabled)
promote_secondaries - BOOLEAN
When a primary IP address is removed from this interface
promote a corresponding secondary IP address instead of
removing all the corresponding secondary IP addresses.
+
+ Default: 0 (disabled)
drop_unicast_in_l2_multicast - BOOLEAN
Drop any unicast IP packets that are received in link-layer
--
2.25.1
