So, i also noticed that some of the parameters represented as boolean have no value constrain checks and accept integer values due to u8 implementation, so i wrote a note for every boolean parameter that have no constrain checks in code. and fixed a typo in fmwark instead of fwmark. Added notes for 19 confirmed parameters, Verified by code inspection and runtime testing. Signed-off-by: Abdelrahman Fekry <abdelrahmanfekry375@xxxxxxxxx> --- Documentation/networking/ip-sysctl.rst | 50 +++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 5 deletions(-) diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index f7ff8c53f412..99e786915204 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -68,6 +68,8 @@ ip_forward_use_pmtu - BOOLEAN - 0 - disabled - 1 - enabled + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. fwmark_reflect - BOOLEAN Controls the fwmark of kernel-generated IPv4 reply packets that are not @@ -89,6 +91,8 @@ fib_multipath_use_neigh - BOOLEAN - 0 - disabled - 1 - enabled + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. fib_multipath_hash_policy - INTEGER Controls which hash policy to use for multipath routes. Only valid @@ -489,6 +493,8 @@ tcp_fwmark_accept - BOOLEAN unaffected. Default: 0 + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. tcp_invalid_ratelimit - INTEGER Limit the maximal rate for sending duplicate acknowledgments @@ -603,6 +609,8 @@ tcp_moderate_rcvbuf - BOOLEAN automatically size the buffer (no greater than tcp_rmem[2]) to match the size required by the path for full throughput. Enabled by default. + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. tcp_mtu_probing - INTEGER Controls TCP Packetization-Layer Path MTU Discovery. Takes three @@ -636,6 +644,8 @@ tcp_no_ssthresh_metrics_save - BOOLEAN Controls whether TCP saves ssthresh metrics in the route cache. Default is 1, which disables ssthresh metrics. + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. tcp_orphan_retries - INTEGER This value influences the timeout of a locally closed TCP connection, @@ -703,7 +713,9 @@ tcp_retries1 - INTEGER RFC 1122 recommends at least 3 retransmissions, which is the default. - + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. + tcp_retries2 - INTEGER This value influences the timeout of an alive TCP connection, when RTO retransmissions remain unacknowledged. @@ -751,6 +763,8 @@ tcp_sack - BOOLEAN Enable select acknowledgments (SACKS). Default: 1 (enabled) + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. tcp_comp_sack_delay_ns - LONG INTEGER TCP tries to reduce number of SACK sent, using a timer @@ -787,6 +801,8 @@ tcp_slow_start_after_idle - BOOLEAN be timed out after an idle period. Default: 1 + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. tcp_stdurg - BOOLEAN Use the Host requirements interpretation of the TCP urgent pointer field. @@ -794,6 +810,8 @@ tcp_stdurg - BOOLEAN Linux might not communicate correctly with them. Default: 0 (disabled) + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. tcp_synack_retries - INTEGER Number of times SYNACKs for a passive TCP connection attempt will @@ -1034,6 +1052,8 @@ tcp_window_scaling - BOOLEAN - 1 - Enabled. Default: 1 (enabled) + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. tcp_shrink_window - BOOLEAN This changes how the TCP receive window is calculated. @@ -1049,6 +1069,8 @@ tcp_shrink_window - BOOLEAN scaling factor is also in effect. Default: 0 + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. tcp_wmem - vector of 3 INTEGERs: min, default, max min: Amount of memory reserved for send buffers for TCP sockets. @@ -1104,7 +1126,9 @@ tcp_thin_linear_timeouts - BOOLEAN Documentation/networking/tcp-thin.rst Default: 0 - + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. + tcp_limit_output_bytes - INTEGER Controls TCP Small Queue limit per tcp socket. TCP bulk sender tends to increase packets in flight until it @@ -1367,6 +1391,9 @@ cipso_rbm_optfmt - BOOLEAN categories in order to make the packet data 32-bit aligned. Default: 0 + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. + cipso_rbm_strictvalid - BOOLEAN If set, do a very strict check of the CIPSO option when @@ -1377,6 +1404,9 @@ cipso_rbm_strictvalid - BOOLEAN with other implementations that require strict checking. Default: 0 + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. + IP Variables ============ @@ -1437,6 +1467,9 @@ ip_nonlocal_bind - BOOLEAN which can be quite useful - but may break some applications. Default: 0 + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. + ip_autobind_reuse - BOOLEAN By default, bind() does not select the ports automatically even if @@ -1447,6 +1480,8 @@ ip_autobind_reuse - BOOLEAN option should only be set by experts. Default: 0 + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. + ip_dynaddr - INTEGER If set non-zero, enables support for dynamic addresses. If set to a non-zero value larger than 1, a kernel log @@ -1476,13 +1511,16 @@ tcp_early_demux - BOOLEAN Enable early demux for established TCP sockets. Default: 1 + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. + udp_early_demux - BOOLEAN Enable early demux for connected UDP sockets. Disable this if your system could experience more unconnected load. Default: 1 - + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. + icmp_echo_ignore_all - BOOLEAN If set non-zero, then the kernel will ignore all ICMP ECHO requests sent to it. @@ -1815,7 +1853,7 @@ src_valid_mark - BOOLEAN lookup. This permits rp_filter to function when the fwmark is used for routing traffic in both directions. - This setting also affects the utilization of fmwark when + This setting also affects the utilization of fwmark when performing source address selection for ICMP replies, or determining addresses stored for the IPOPT_TS_TSANDADDR and IPOPT_RR IP options. @@ -2324,7 +2362,9 @@ fwmark_reflect - BOOLEAN fwmark of the packet they are replying to. Default: 0 - + + note: Accepts integer values (0-255) but only 0/1 have defined behaviour. + ``conf/interface/*``: Change special settings per interface. -- 2.25.1
