Re: [PATCH v3 1/8] Documentation: ABI: add oversampling frequency in sysfs-bus-iio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 10 Jun 2025 09:34:34 +0200
Jorge Marques <jorge.marques@xxxxxxxxxx> wrote:

Trivial: 
In the patch title use the actual file name of the new ABI.

add oversampling_frequency in sysfs-bus-iio


> Some devices have an internal clock used to space out the conversion
> trigger for the oversampling filter, Consider an ADC with conversion and
> data ready pins topology:
> 
>   Sampling trigger |       |       |       |       |
>   ADC conversion   ++++    ++++    ++++    ++++    ++++
>   ADC data ready      *       *       *       *       *
> 
> With the oversampling frequency, conversions are spaced:
> 
>   Sampling trigger |       |       |       |       |
>   ADC conversion   + + + + + + + + + + + + + + + + + + + +
>   ADC data ready         *       *       *       *       *
> 
> In some devices and ranges, this internal clock can be used to evenly
> space the conversions between the sampling edge. In other devices the
> oversampling frequency is fixed or is computed based on the sampling
> frequency parameter, and the parameter is read only.
> 
> Signed-off-by: Jorge Marques <jorge.marques@xxxxxxxxxx>
> ---
>  Documentation/ABI/testing/sysfs-bus-iio | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index ef52c427a015cf47bb9847782e13afbee01e9f31..e60367255be89a9acc827ec1a749b729735f60e6 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -139,6 +139,23 @@ Contact:	linux-iio@xxxxxxxxxxxxxxx
>  Description:
>  		Hardware dependent values supported by the oversampling filter.
>  
> +What:		/sys/bus/iio/devices/iio:deviceX/oversampling_frequency
> +KernelVersion:	6.17
> +Contact:	linux-iio@xxxxxxxxxxxxxxx
> +Description:
> +		Some devices have internal clocks for oversampling.

Wrapping on each sentence is unusual. David pointed this out in v2.
Wrap at 80 chars as a single paragraph.

> +		Sets the resulting frequency in Hz to trigger a conversion used by
> +		the oversampling filter.
> +		If the device has a fixed internal clock or is computed based on
> +		the sampling frequency parameter, the parameter is read only.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/oversampling_frequency_available
> +KernelVersion:	6.17
> +Contact:	linux-iio@xxxxxxxxxxxxxxx
> +Description:
> +		Hardware dependent values supported by the oversampling
> +		frequency.
> +
>  What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_raw
>  What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw
>  What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_raw
> 





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux