From: Kory Maincent (Dent Project) <kory.maincent@xxxxxxxxxxx>
This patch expands the status information provided by ethtool for PSE c33
with current port priority and max port priority. It also adds a call to
pse_ethtool_set_prio() to configure the PSE port priority.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@xxxxxxxxxxx>
Reviewed-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
Change in v6:
- Remove c33 standard reference from new netlink field in documentation.
- Remove report of budget evaluation strategy.
Change in v4:
- Remove disconnection policy features.
- Rename port priority to budget evaluation strategy.
Change in v3:
- Add disconnection policy.
Change in v2:
- Improve port priority documentation.
- Add port priority modes.
---
Documentation/netlink/specs/ethtool.yaml | 11 +++++++++++
Documentation/networking/ethtool-netlink.rst | 26 ++++++++++++++++++++++++++
include/uapi/linux/ethtool_netlink_generated.h | 2 ++
net/ethtool/pse-pd.c | 18 ++++++++++++++++++
4 files changed, 57 insertions(+)
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 25e7b9b361e4..39c50827fc7e 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -1381,6 +1381,14 @@ attribute-sets:
name: pse-pw-d-id
type: u32
name-prefix: ethtool-a-
+ -
+ name: pse-prio-max
+ type: u32
+ name-prefix: ethtool-a-
+ -
+ name: pse-prio
+ type: u32
+ name-prefix: ethtool-a-
-
name: rss
attr-cnt-name: __ethtool-a-rss-cnt
@@ -2202,6 +2210,8 @@ operations:
- c33-pse-avail-pw-limit
- c33-pse-pw-limit-ranges
- pse-pw-d-id
+ - pse-prio-max
+ - pse-prio
dump: *pse-get-op
-
name: pse-set
@@ -2216,6 +2226,7 @@ operations:
- podl-pse-admin-control
- c33-pse-admin-control
- c33-pse-avail-pw-limit
+ - pse-prio
-
name: rss-get
doc: Get RSS params.
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 49c9a0e79af5..efc410ae26c8 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -1790,6 +1790,10 @@ Kernel response contents:
``ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES`` nested Supported power limit
configuration ranges.
``ETHTOOL_A_PSE_PW_D_ID`` u32 Index of the PSE power domain
+ ``ETHTOOL_A_PSE_PRIO_MAX`` u32 Priority maximum configurable
+ on the PoE PSE
+ ``ETHTOOL_A_PSE_PRIO`` u32 Priority of the PoE PSE
+ currently configured
========================================== ====== =============================
When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
@@ -1866,6 +1870,12 @@ equal.
The ``ETHTOOL_A_PSE_PW_D_ID`` attribute identifies the index of PSE power
domain.
+When set, the optional ``ETHTOOL_A_PSE_PRIO_MAX`` attribute identifies
+the PSE maximum priority value.
+When set, the optional ``ETHTOOL_A_PSE_PRIO`` attributes is used to
+identifies the currently configured PSE priority.
+For a description of PSE priority attributes, see ``PSE_SET``.
+
PSE_SET
=======
@@ -1879,6 +1889,8 @@ Request contents:
``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` u32 Control PSE Admin state
``ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT`` u32 Control PoE PSE available
power limit
+ ``ETHTOOL_A_PSE_PRIO`` u32 Control priority of the
+ PoE PSE
====================================== ====== =============================
When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used
@@ -1901,6 +1913,20 @@ various existing products that document power consumption in watts rather than
classes. If power limit configuration based on classes is needed, the
conversion can be done in user space, for example by ethtool.
+When set, the optional ``ETHTOOL_A_PSE_PRIO`` attributes is used to
+control the PSE priority. Allowed priority value are between zero and
+the value of ``ETHTOOL_A_PSE_PRIO_MAX`` attribute.
+
+A lower value indicates a higher priority, meaning that a priority value
+of 0 corresponds to the highest port priority.
+Port priority serves two functions:
+
+ - Power-up Order: After a reset, ports are powered up in order of their
+ priority from highest to lowest. Ports with higher priority
+ (lower values) power up first.
+ - Shutdown Order: When the power budget is exceeded, ports with lower
+ priority (higher values) are turned off first.
+
PSE_NTF
=======
diff --git a/include/uapi/linux/ethtool_netlink_generated.h b/include/uapi/linux/ethtool_netlink_generated.h
index 210975dc7d42..43f6c6e4ae5f 100644
--- a/include/uapi/linux/ethtool_netlink_generated.h
+++ b/include/uapi/linux/ethtool_netlink_generated.h
@@ -629,6 +629,8 @@ enum {
ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT,
ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES,
ETHTOOL_A_PSE_PW_D_ID,
+ ETHTOOL_A_PSE_PRIO_MAX,
+ ETHTOOL_A_PSE_PRIO,
__ETHTOOL_A_PSE_CNT,
ETHTOOL_A_PSE_MAX = (__ETHTOOL_A_PSE_CNT - 1)
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index f5529a0b7c41..69ec735ffd4c 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -112,6 +112,9 @@ static int pse_reply_size(const struct ethnl_req_info *req_base,
len += st->c33_pw_limit_nb_ranges *
(nla_total_size(0) +
nla_total_size(sizeof(u32)) * 2);
+ if (st->prio_max)
+ /* _PSE_PRIO_MAX + _PSE_PRIO */
+ len += nla_total_size(sizeof(u32)) * 2;
return len;
}
@@ -206,6 +209,11 @@ static int pse_fill_reply(struct sk_buff *skb,
pse_put_pw_limit_ranges(skb, st))
return -EMSGSIZE;
+ if (st->prio_max > 0 &&
+ (nla_put_u32(skb, ETHTOOL_A_PSE_PRIO_MAX, st->prio_max) ||
+ nla_put_u32(skb, ETHTOOL_A_PSE_PRIO, st->prio)))
+ return -EMSGSIZE;
+
return 0;
}
@@ -227,6 +235,7 @@ const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
NLA_POLICY_RANGE(NLA_U32, ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED,
ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED),
[ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT] = { .type = NLA_U32 },
+ [ETHTOOL_A_PSE_PRIO] = { .type = NLA_U32 },
};
static int
@@ -275,6 +284,15 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
if (ret)
return ret;
+ if (tb[ETHTOOL_A_PSE_PRIO]) {
+ unsigned int prio;
+
+ prio = nla_get_u32(tb[ETHTOOL_A_PSE_PRIO]);
+ ret = pse_ethtool_set_prio(phydev->psec, info->extack, prio);
+ if (ret)
+ return ret;
+ }
+
if (tb[ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT]) {
unsigned int pw_limit;
--
2.34.1
