Hi Matthias, On 15/04/2025 13:18, Matthias Schiffer wrote: > k3-am65-cpsw-nuss controllers have a fixed internal TX delay, so RXID > mode is not actually possible and will result in a warning from the > driver going forward. > > Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx> > --- > .../devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml > index b11894fbaec47..c8128b8ca74fb 100644 > --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml > +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml > @@ -282,7 +282,7 @@ examples: > ti,syscon-efuse = <&mcu_conf 0x200>; > phys = <&phy_gmii_sel 1>; > > - phy-mode = "rgmii-rxid"; > + phy-mode = "rgmii-id"; > phy-handle = <&phy0>; > }; > }; FYI the following TI boards using this driver are using "rgmii-rxid". Will you be sending fixes to the device trees files? arch/arm64/boot/dts/ti k3-am625-beagleplay.dts: phy-mode = "rgmii-rxid"; k3-am625-sk.dts: phy-mode = "rgmii-rxid"; k3-am625-sk.dts.orig: phy-mode = "rgmii-rxid"; k3-am62a7-sk.dts: phy-mode = "rgmii-rxid"; k3-am62a-phycore-som.dtsi: phy-mode = "rgmii-rxid"; k3-am62p5-sk.dts: phy-mode = "rgmii-rxid"; k3-am62p5-sk.dts: phy-mode = "rgmii-rxid"; k3-am62-phycore-som.dtsi: phy-mode = "rgmii-rxid"; k3-am62-verdin-dev.dtsi: phy-mode = "rgmii-rxid"; k3-am62-verdin.dtsi: phy-mode = "rgmii-rxid"; k3-am62-verdin-ivy.dtsi: phy-mode = "rgmii-rxid"; k3-am62x-phyboard-lyra.dtsi: phy-mode = "rgmii-rxid"; k3-am62x-sk-common.dtsi: phy-mode = "rgmii-rxid"; k3-am642-evm.dts: phy-mode = "rgmii-rxid"; k3-am642-evm.dts: phy-mode = "rgmii-rxid"; k3-am642-sk.dts: phy-mode = "rgmii-rxid"; k3-am642-sk.dts: phy-mode = "rgmii-rxid"; k3-am642-tqma64xxl-mbax4xxl.dts: phy-mode = "rgmii-rxid"; k3-am642-tqma64xxl-mbax4xxl.dts: /* phy-mode is fixed up to rgmii-rxid by prueth driver to account for k3-am64-phycore-som.dtsi: phy-mode = "rgmii-rxid"; k3-am654-base-board.dts: phy-mode = "rgmii-rxid"; k3-am67a-beagley-ai.dts: phy-mode = "rgmii-rxid"; k3-am68-sk-base-board.dts: phy-mode = "rgmii-rxid"; k3-am69-sk.dts: phy-mode = "rgmii-rxid"; k3-j7200-common-proc-board.dts: phy-mode = "rgmii-rxid"; k3-j721e-beagleboneai64.dts: phy-mode = "rgmii-rxid"; k3-j721e-common-proc-board.dts: phy-mode = "rgmii-rxid"; k3-j721e-evm-gesi-exp-board.dtso: phy-mode = "rgmii-rxid"; k3-j721e-evm-gesi-exp-board.dtso: phy-mode = "rgmii-rxid"; k3-j721e-evm-gesi-exp-board.dtso: phy-mode = "rgmii-rxid"; k3-j721e-evm-gesi-exp-board.dtso: phy-mode = "rgmii-rxid"; k3-j721e-sk.dts: phy-mode = "rgmii-rxid"; k3-j721s2-common-proc-board.dts: phy-mode = "rgmii-rxid"; k3-j721s2-evm-gesi-exp-board.dtso: phy-mode = "rgmii-rxid"; k3-j722s-evm.dts: phy-mode = "rgmii-rxid"; k3-j784s4-j742s2-evm-common.dtsi: phy-mode = "rgmii-rxid"; k3-j784s4-j742s2-evm-common.dtsi: phy-mode = "rgmii-rxid"; -- cheers, -roger
