On Fri, 11 Apr 2025 at 17:28, Ilpo Järvinen
<ilpo.jarvinen@xxxxxxxxxxxxxxx> wrote:
>
> On Sat, 22 Mar 2025, Antheas Kapenekakis wrote:
>
> > The EC of OneXPlayer devices used to only control the fan.
> > This is no longer the case, with the EC of OneXPlayer gaining
> > additional functionality (turbo button, turbo led, battery controls).
> >
> > As it will be beneficial from a complexity perspective
> > to retain this driver as a single unit, move it out
> > of hwmon, and into platform/x86. Also, remove the
> > hwmon documentation to avoid it becoming stale.
>
> Perhaps mention that the sysfs interface will be documented into
> Documentation/ABI/ as it sound bit harsh to just remove documentation
> because it could become stale :-) ?
The reasoning here was more complex. It was boilerplate hwmon
documentation so if it stayed it would have stayed there. However,
there was a disagreement with how it should be reworded, so Guenter
suggested it be removed, since hwmon documentation for platform
drivers is optional.
Thanks for the review. I will try to get through the other emails the
next week and do a v9
Antheas
> >
> > While at it, add myself to the maintainer's file.
> >
> > Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> > Reviewed-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
> > Reviewed-by: Derek J. Clark <derekjohn.clark@xxxxxxxxx>
> > Signed-off-by: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
> > ---
> > Documentation/hwmon/index.rst | 2 +-
> > Documentation/hwmon/oxp-sensors.rst | 89 -------------------
> > MAINTAINERS | 7 +-
> > drivers/hwmon/Kconfig | 11 ---
> > drivers/hwmon/Makefile | 1 -
> > drivers/platform/x86/Kconfig | 12 +++
> > drivers/platform/x86/Makefile | 3 +
> > .../oxp-sensors.c => platform/x86/oxpec.c} | 10 +--
> > 8 files changed, 24 insertions(+), 111 deletions(-)
> > delete mode 100644 Documentation/hwmon/oxp-sensors.rst
> > rename drivers/{hwmon/oxp-sensors.c => platform/x86/oxpec.c} (98%)
> >
> > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> > index 874f8fd263252..dd7a54d5f2816 100644
> > --- a/Documentation/hwmon/index.rst
> > +++ b/Documentation/hwmon/index.rst
> > @@ -186,7 +186,7 @@ Hardware Monitoring Kernel Drivers
> > nzxt-kraken3
> > nzxt-smart2
> > occ
> > - oxp-sensors
> > + oxpec
> > pc87360
> > pc87427
> > pcf8591
> > diff --git a/Documentation/hwmon/oxp-sensors.rst b/Documentation/hwmon/oxp-sensors.rst
> > deleted file mode 100644
> > index 581c4dafbfa13..0000000000000
> > --- a/Documentation/hwmon/oxp-sensors.rst
> > +++ /dev/null
> > @@ -1,89 +0,0 @@
> > -.. SPDX-License-Identifier: GPL-2.0-or-later
> > -
> > -Kernel driver oxp-sensors
> > -=========================
> > -
> > -Authors:
> > - - Derek John Clark <derekjohn.clark@xxxxxxxxx>
> > - - Joaquín Ignacio Aramendía <samsagax@xxxxxxxxx>
> > -
> > -Description:
> > -------------
> > -
> > -Handheld devices from OneNetbook, AOKZOE, AYANEO, And OrangePi provide fan
> > -readings and fan control through their embedded controllers.
> > -
> > -Currently supports OneXPlayer devices, AOKZOE, AYANEO, and OrangePi
> > -handheld devices. AYANEO devices preceding the AIR and OneXPlayer devices
> > -preceding the Mini A07 are not supportable as the EC model is different
> > -and do not have manual control capabilities.
> > -
> > -Some OneXPlayer and AOKZOE models have a toggle for changing the behaviour
> > -of the "Turbo/Silent" button of the device. It will change the key event
> > -that it triggers with a flip of the `tt_toggle` attribute. See below for
> > -boards that support this function.
> > -
> > -Supported devices
> > ------------------
> > -
> > -Currently the driver supports the following handhelds:
> > -
> > - - AOKZOE A1
> > - - AOKZOE A1 PRO
> > - - AYANEO 2
> > - - AYANEO 2S
> > - - AYANEO AIR
> > - - AYANEO AIR 1S
> > - - AYANEO AIR Plus (Mendocino)
> > - - AYANEO AIR Pro
> > - - AYANEO Flip DS
> > - - AYANEO Flip KB
> > - - AYANEO Geek
> > - - AYANEO Geek 1S
> > - - AYANEO KUN
> > - - OneXPlayer 2
> > - - OneXPlayer 2 Pro
> > - - OneXPlayer AMD
> > - - OneXPlayer mini AMD
> > - - OneXPlayer mini AMD PRO
> > - - OneXPlayer OneXFly
> > - - OneXPlayer X1 A
> > - - OneXPlayer X1 i
> > - - OneXPlayer X1 mini
> > - - OrangePi NEO-01
> > -
> > -"Turbo/Silent" button behaviour toggle is only supported on:
> > - - AOK ZOE A1
> > - - AOK ZOE A1 PRO
> > - - OneXPlayer 2
> > - - OneXPlayer 2 Pro
> > - - OneXPlayer mini AMD (only with updated alpha BIOS)
> > - - OneXPlayer mini AMD PRO
> > - - OneXPlayer OneXFly
> > - - OneXPlayer X1 A
> > - - OneXPlayer X1 i
> > - - OneXPlayer X1 mini
> > -
> > -Sysfs entries
> > --------------
> > -
> > -The following attributes are supported:
> > -
> > -fan1_input
> > - Read Only. Reads current fan RPM.
> > -
> > -pwm1_enable
> > - Read Write. Enable manual fan control. Write "1" to set to manual, write "0"
> > - to let the EC control de fan speed. Read this attribute to see current status.
> > -
> > -pwm1
> > - Read Write. Read this attribute to see current duty cycle in the range [0-255].
> > - When pwm1_enable is set to "1" (manual) write any value in the range [0-255]
> > - to set fan speed.
> > -
> > -tt_toggle
> > - Read Write. Read this attribute to check the status of the turbo/silent
> > - button behaviour function. Write "1" to activate the switch and "0" to
> > - deactivate it. The specific keycodes and behaviour is specific to the device
> > - both with this function on and off. This attribute is attached to the platform
> > - driver and not to the hwmon driver (/sys/devices/platform/oxp-platform/tt_toggle)
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index c9763412a5089..20720f92e4a63 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -17656,12 +17656,13 @@ S: Maintained
> > F: drivers/mtd/nand/onenand/
> > F: include/linux/mtd/onenand*.h
> >
> > -ONEXPLAYER FAN DRIVER
> > +ONEXPLAYER PLATFORM EC DRIVER
> > +M: Antheas Kapenekakis <lkml@xxxxxxxxxxx>
> > M: Derek John Clark <derekjohn.clark@xxxxxxxxx>
> > M: Joaquín Ignacio Aramendía <samsagax@xxxxxxxxx>
> > -L: linux-hwmon@xxxxxxxxxxxxxxx
> > +L: platform-driver-x86@xxxxxxxxxxxxxxx
> > S: Maintained
> > -F: drivers/hwmon/oxp-sensors.c
> > +F: drivers/platform/x86/oxpec.c
> >
> > ONIE TLV NVMEM LAYOUT DRIVER
> > M: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index 4cbaba15d86ef..09f7aed96d15e 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -1774,17 +1774,6 @@ config SENSORS_NZXT_SMART2
> >
> > source "drivers/hwmon/occ/Kconfig"
> >
> > -config SENSORS_OXP
> > - tristate "OneXPlayer EC fan control"
> > - depends on ACPI_EC
> > - depends on X86
> > - help
> > - If you say yes here you get support for fan readings and control over
> > - OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant
> > - boards are supported.
> > -
> > - Can also be built as a module. In that case it will be called oxp-sensors.
> > -
> > config SENSORS_PCF8591
> > tristate "Philips PCF8591 ADC/DAC"
> > depends on I2C
> > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> > index b7ef0f0562d37..0edb08824b178 100644
> > --- a/drivers/hwmon/Makefile
> > +++ b/drivers/hwmon/Makefile
> > @@ -181,7 +181,6 @@ obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
> > obj-$(CONFIG_SENSORS_NZXT_KRAKEN2) += nzxt-kraken2.o
> > obj-$(CONFIG_SENSORS_NZXT_KRAKEN3) += nzxt-kraken3.o
> > obj-$(CONFIG_SENSORS_NZXT_SMART2) += nzxt-smart2.o
> > -obj-$(CONFIG_SENSORS_OXP) += oxp-sensors.o
> > obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
> > obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
> > obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
> > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> > index 0258dd879d64b..82cfc76bc5c9f 100644
> > --- a/drivers/platform/x86/Kconfig
> > +++ b/drivers/platform/x86/Kconfig
> > @@ -1186,6 +1186,18 @@ config SEL3350_PLATFORM
> > To compile this driver as a module, choose M here: the module
> > will be called sel3350-platform.
> >
> > +config OXP_EC
> > + tristate "OneXPlayer EC platform control"
> > + depends on ACPI_EC
> > + depends on HWMON
> > + depends on X86
> > + help
> > + Enables support for the platform EC of OneXPlayer and AOKZOE
> > + handheld devices. This includes fan speed, fan controls, and
> > + disabling the default TDP behavior of the device. Due to legacy
> > + reasons, this driver also provides hwmon functionality to Ayaneo
> > + devices and the OrangePi Neo.
> > +
> > endif # X86_PLATFORM_DEVICES
> >
> > config P2SB
> > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> > index e1b1429470674..f64a191c1162e 100644
> > --- a/drivers/platform/x86/Makefile
> > +++ b/drivers/platform/x86/Makefile
> > @@ -153,3 +153,6 @@ obj-$(CONFIG_WINMATE_FM07_KEYS) += winmate-fm07-keys.o
> >
> > # SEL
> > obj-$(CONFIG_SEL3350_PLATFORM) += sel3350-platform.o
> > +
> > +# OneXPlayer
> > +obj-$(CONFIG_OXP_EC) += oxpec.o
> > \ No newline at end of file
>
> Please fix the newline.
>
> > diff --git a/drivers/hwmon/oxp-sensors.c b/drivers/platform/x86/oxpec.c
> > similarity index 98%
> > rename from drivers/hwmon/oxp-sensors.c
> > rename to drivers/platform/x86/oxpec.c
> > index f7a64fbc8f33e..dc3a0871809cd 100644
> > --- a/drivers/hwmon/oxp-sensors.c
> > +++ b/drivers/platform/x86/oxpec.c
> > @@ -1,11 +1,8 @@
> > // SPDX-License-Identifier: GPL-2.0+
> > /*
> > - * Platform driver for OneXPlayer, AOKZOE, AYANEO, and OrangePi Handhelds
> > - * that expose fan reading and control via hwmon sysfs.
> > - *
> > - * Old OXP boards have the same DMI strings and they are told apart by
> > - * the boot cpu vendor (Intel/AMD). Of these older models only AMD is
> > - * supported.
> > + * Platform driver for OneXPlayer and AOKZOE devices. For the time being,
> > + * it also exposes fan controls for AYANEO, and OrangePi Handhelds via
> > + * hwmon sysfs.
> > *
> > * Fan control is provided via pwm interface in the range [0-255].
> > * Old AMD boards use [0-100] as range in the EC, the written value is
> > @@ -16,6 +13,7 @@
> > *
> > * Copyright (C) 2022 Joaquín I. Aramendía <samsagax@xxxxxxxxx>
> > * Copyright (C) 2024 Derek J. Clark <derekjohn.clark@xxxxxxxxx>
> > + * Copyright (C) 2025 Antheas Kapenekakis <lkml@xxxxxxxxxxx>
> > */
> >
> > #include <linux/acpi.h>
> >
>
> --
> i.
