On Tue, Apr 08, 2025 at 04:32:11PM +0200, Kory Maincent wrote: > From: Kory Maincent (Dent Project) <kory.maincent@xxxxxxxxxxx> > > Add support for devm_pse_irq_helper() to register PSE interrupts and report > events such as over-current or over-temperature conditions. This follows a > similar approach to the regulator API but also sends notifications using a > dedicated PSE ethtool netlink socket. > > Introduce an attached_phydev field in the pse_control structure to store > the phydev attached to the PSE PI, ensuring that PSE ethtool notifications > are sent to the correct network interface. > > The attached_phydev pointer is directly tied to the PHY lifecycle. It > is set when the PHY is registered and cleared when the PHY is removed. > There is no need to use a refcount, as doing so could interfere with > the PHY removal process. > > Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@xxxxxxxxxxx> Reviewed-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> Thank you! -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
