From: Eric Biggers <ebiggers@xxxxxxxxxx>
Stop wrapping skcipher and aead algorithms with the crypto SIMD helper
(crypto/simd.c). The only purpose of doing so was to work around x86
not always supporting kernel-mode FPU in softirqs. Specifically, if a
hardirq interrupted a task context kernel-mode FPU section and then a
softirqs were run at the end of that hardirq, those softirqs could not
use kernel-mode FPU. This has now been fixed. In combination with the
fact that the skcipher and aead APIs only support task and softirq
contexts, these can now just use kernel-mode FPU unconditionally on x86.
This simplifies the code and improves performance.
Signed-off-by: Eric Biggers <ebiggers@xxxxxxxxxx>
---
arch/x86/crypto/Kconfig | 3 ---
arch/x86/crypto/serpent_avx2_glue.c | 21 +++++++--------------
arch/x86/crypto/serpent_avx_glue.c | 21 +++++++--------------
arch/x86/crypto/serpent_sse2_glue.c | 21 +++++++--------------
4 files changed, 21 insertions(+), 45 deletions(-)
diff --git a/arch/x86/crypto/Kconfig b/arch/x86/crypto/Kconfig
index 55800d1ce668e..51c74a496126d 100644
--- a/arch/x86/crypto/Kconfig
+++ b/arch/x86/crypto/Kconfig
@@ -132,11 +132,10 @@ config CRYPTO_DES3_EDE_X86_64
config CRYPTO_SERPENT_SSE2_X86_64
tristate "Ciphers: Serpent with modes: ECB, CBC (SSE2)"
depends on X86 && 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_SERPENT
- select CRYPTO_SIMD
imply CRYPTO_CTR
help
Length-preserving ciphers: Serpent cipher algorithm
with ECB and CBC modes
@@ -148,11 +147,10 @@ config CRYPTO_SERPENT_SSE2_X86_64
config CRYPTO_SERPENT_SSE2_586
tristate "Ciphers: Serpent with modes: ECB, CBC (32-bit with SSE2)"
depends on X86 && !64BIT
select CRYPTO_SKCIPHER
select CRYPTO_SERPENT
- select CRYPTO_SIMD
imply CRYPTO_CTR
help
Length-preserving ciphers: Serpent cipher algorithm
with ECB and CBC modes
@@ -164,11 +162,10 @@ config CRYPTO_SERPENT_SSE2_586
config CRYPTO_SERPENT_AVX_X86_64
tristate "Ciphers: Serpent with modes: ECB, CBC (AVX)"
depends on X86 && 64BIT
select CRYPTO_SKCIPHER
select CRYPTO_SERPENT
- select CRYPTO_SIMD
imply CRYPTO_XTS
imply CRYPTO_CTR
help
Length-preserving ciphers: Serpent cipher algorithm
with ECB and CBC modes
diff --git a/arch/x86/crypto/serpent_avx2_glue.c b/arch/x86/crypto/serpent_avx2_glue.c
index 347e97f4b713b..f5f2121b79567 100644
--- a/arch/x86/crypto/serpent_avx2_glue.c
+++ b/arch/x86/crypto/serpent_avx2_glue.c
@@ -8,11 +8,10 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
#include <crypto/algapi.h>
-#include <crypto/internal/simd.h>
#include <crypto/serpent.h>
#include "serpent-avx.h"
#include "ecb_cbc_helpers.h"
@@ -63,27 +62,25 @@ static int cbc_decrypt(struct skcipher_request *req)
CBC_WALK_END();
}
static struct skcipher_alg serpent_algs[] = {
{
- .base.cra_name = "__ecb(serpent)",
- .base.cra_driver_name = "__ecb-serpent-avx2",
+ .base.cra_name = "ecb(serpent)",
+ .base.cra_driver_name = "ecb-serpent-avx2",
.base.cra_priority = 600,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = SERPENT_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct serpent_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = SERPENT_MIN_KEY_SIZE,
.max_keysize = SERPENT_MAX_KEY_SIZE,
.setkey = serpent_setkey_skcipher,
.encrypt = ecb_encrypt,
.decrypt = ecb_decrypt,
}, {
- .base.cra_name = "__cbc(serpent)",
- .base.cra_driver_name = "__cbc-serpent-avx2",
+ .base.cra_name = "cbc(serpent)",
+ .base.cra_driver_name = "cbc-serpent-avx2",
.base.cra_priority = 600,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = SERPENT_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct serpent_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = SERPENT_MIN_KEY_SIZE,
.max_keysize = SERPENT_MAX_KEY_SIZE,
@@ -92,12 +89,10 @@ static struct skcipher_alg serpent_algs[] = {
.encrypt = cbc_encrypt,
.decrypt = cbc_decrypt,
},
};
-static struct simd_skcipher_alg *serpent_simd_algs[ARRAY_SIZE(serpent_algs)];
-
static int __init serpent_avx2_init(void)
{
const char *feature_name;
if (!boot_cpu_has(X86_FEATURE_AVX2) || !boot_cpu_has(X86_FEATURE_OSXSAVE)) {
@@ -108,19 +103,17 @@ static int __init serpent_avx2_init(void)
&feature_name)) {
pr_info("CPU feature '%s' is not supported.\n", feature_name);
return -ENODEV;
}
- return simd_register_skciphers_compat(serpent_algs,
- ARRAY_SIZE(serpent_algs),
- serpent_simd_algs);
+ return crypto_register_skciphers(serpent_algs,
+ ARRAY_SIZE(serpent_algs));
}
static void __exit serpent_avx2_fini(void)
{
- simd_unregister_skciphers(serpent_algs, ARRAY_SIZE(serpent_algs),
- serpent_simd_algs);
+ crypto_unregister_skciphers(serpent_algs, ARRAY_SIZE(serpent_algs));
}
module_init(serpent_avx2_init);
module_exit(serpent_avx2_fini);
diff --git a/arch/x86/crypto/serpent_avx_glue.c b/arch/x86/crypto/serpent_avx_glue.c
index 6c248e1ea4ef7..e640abc1cb8a7 100644
--- a/arch/x86/crypto/serpent_avx_glue.c
+++ b/arch/x86/crypto/serpent_avx_glue.c
@@ -11,11 +11,10 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
#include <crypto/algapi.h>
-#include <crypto/internal/simd.h>
#include <crypto/serpent.h>
#include "serpent-avx.h"
#include "ecb_cbc_helpers.h"
@@ -69,27 +68,25 @@ static int cbc_decrypt(struct skcipher_request *req)
CBC_WALK_END();
}
static struct skcipher_alg serpent_algs[] = {
{
- .base.cra_name = "__ecb(serpent)",
- .base.cra_driver_name = "__ecb-serpent-avx",
+ .base.cra_name = "ecb(serpent)",
+ .base.cra_driver_name = "ecb-serpent-avx",
.base.cra_priority = 500,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = SERPENT_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct serpent_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = SERPENT_MIN_KEY_SIZE,
.max_keysize = SERPENT_MAX_KEY_SIZE,
.setkey = serpent_setkey_skcipher,
.encrypt = ecb_encrypt,
.decrypt = ecb_decrypt,
}, {
- .base.cra_name = "__cbc(serpent)",
- .base.cra_driver_name = "__cbc-serpent-avx",
+ .base.cra_name = "cbc(serpent)",
+ .base.cra_driver_name = "cbc-serpent-avx",
.base.cra_priority = 500,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = SERPENT_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct serpent_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = SERPENT_MIN_KEY_SIZE,
.max_keysize = SERPENT_MAX_KEY_SIZE,
@@ -98,31 +95,27 @@ static struct skcipher_alg serpent_algs[] = {
.encrypt = cbc_encrypt,
.decrypt = cbc_decrypt,
},
};
-static struct simd_skcipher_alg *serpent_simd_algs[ARRAY_SIZE(serpent_algs)];
-
static int __init serpent_init(void)
{
const char *feature_name;
if (!cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM,
&feature_name)) {
pr_info("CPU feature '%s' is not supported.\n", feature_name);
return -ENODEV;
}
- return simd_register_skciphers_compat(serpent_algs,
- ARRAY_SIZE(serpent_algs),
- serpent_simd_algs);
+ return crypto_register_skciphers(serpent_algs,
+ ARRAY_SIZE(serpent_algs));
}
static void __exit serpent_exit(void)
{
- simd_unregister_skciphers(serpent_algs, ARRAY_SIZE(serpent_algs),
- serpent_simd_algs);
+ crypto_unregister_skciphers(serpent_algs, ARRAY_SIZE(serpent_algs));
}
module_init(serpent_init);
module_exit(serpent_exit);
diff --git a/arch/x86/crypto/serpent_sse2_glue.c b/arch/x86/crypto/serpent_sse2_glue.c
index d78f37e9b2cf7..80ee17ec21b46 100644
--- a/arch/x86/crypto/serpent_sse2_glue.c
+++ b/arch/x86/crypto/serpent_sse2_glue.c
@@ -16,11 +16,10 @@
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/err.h>
#include <crypto/algapi.h>
#include <crypto/b128ops.h>
-#include <crypto/internal/simd.h>
#include <crypto/serpent.h>
#include "serpent-sse2.h"
#include "ecb_cbc_helpers.h"
@@ -72,27 +71,25 @@ static int cbc_decrypt(struct skcipher_request *req)
CBC_WALK_END();
}
static struct skcipher_alg serpent_algs[] = {
{
- .base.cra_name = "__ecb(serpent)",
- .base.cra_driver_name = "__ecb-serpent-sse2",
+ .base.cra_name = "ecb(serpent)",
+ .base.cra_driver_name = "ecb-serpent-sse2",
.base.cra_priority = 400,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = SERPENT_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct serpent_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = SERPENT_MIN_KEY_SIZE,
.max_keysize = SERPENT_MAX_KEY_SIZE,
.setkey = serpent_setkey_skcipher,
.encrypt = ecb_encrypt,
.decrypt = ecb_decrypt,
}, {
- .base.cra_name = "__cbc(serpent)",
- .base.cra_driver_name = "__cbc-serpent-sse2",
+ .base.cra_name = "cbc(serpent)",
+ .base.cra_driver_name = "cbc-serpent-sse2",
.base.cra_priority = 400,
- .base.cra_flags = CRYPTO_ALG_INTERNAL,
.base.cra_blocksize = SERPENT_BLOCK_SIZE,
.base.cra_ctxsize = sizeof(struct serpent_ctx),
.base.cra_module = THIS_MODULE,
.min_keysize = SERPENT_MIN_KEY_SIZE,
.max_keysize = SERPENT_MAX_KEY_SIZE,
@@ -101,28 +98,24 @@ static struct skcipher_alg serpent_algs[] = {
.encrypt = cbc_encrypt,
.decrypt = cbc_decrypt,
},
};
-static struct simd_skcipher_alg *serpent_simd_algs[ARRAY_SIZE(serpent_algs)];
-
static int __init serpent_sse2_init(void)
{
if (!boot_cpu_has(X86_FEATURE_XMM2)) {
printk(KERN_INFO "SSE2 instructions are not detected.\n");
return -ENODEV;
}
- return simd_register_skciphers_compat(serpent_algs,
- ARRAY_SIZE(serpent_algs),
- serpent_simd_algs);
+ return crypto_register_skciphers(serpent_algs,
+ ARRAY_SIZE(serpent_algs));
}
static void __exit serpent_sse2_exit(void)
{
- simd_unregister_skciphers(serpent_algs, ARRAY_SIZE(serpent_algs),
- serpent_simd_algs);
+ crypto_unregister_skciphers(serpent_algs, ARRAY_SIZE(serpent_algs));
}
module_init(serpent_sse2_init);
module_exit(serpent_sse2_exit);
--
2.49.0
