Hello:
This patch was applied to bluetooth/bluez.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>:
On Tue, 26 Aug 2025 11:05:43 +0200 you wrote:
> OBEX download from iPhone is currently slow due to small packet size
> used to transfer data which doesn't follow the MTU negotiated during
> L2CAP connection, i.e. 672 bytes instead of 32767:
>
> < ACL Data TX: Handle 11 flags 0x00 dlen 12
> L2CAP: Connection Request (0x02) ident 18 len 4
> PSM: 4103 (0x1007)
> Source CID: 72
> > ACL Data RX: Handle 11 flags 0x02 dlen 16
> L2CAP: Connection Response (0x03) ident 18 len 8
> Destination CID: 14608
> Source CID: 72
> Result: Connection successful (0x0000)
> Status: No further information available (0x0000)
> < ACL Data TX: Handle 11 flags 0x00 dlen 27
> L2CAP: Configure Request (0x04) ident 20 len 19
> Destination CID: 14608
> Flags: 0x0000
> Option: Maximum Transmission Unit (0x01) [mandatory]
> MTU: 32767
> Option: Retransmission and Flow Control (0x04) [mandatory]
> Mode: Enhanced Retransmission (0x03)
> TX window size: 63
> Max transmit: 3
> Retransmission timeout: 2000
> Monitor timeout: 12000
> Maximum PDU size: 1009
> > ACL Data RX: Handle 11 flags 0x02 dlen 26
> L2CAP: Configure Request (0x04) ident 72 len 18
> Destination CID: 72
> Flags: 0x0000
> Option: Retransmission and Flow Control (0x04) [mandatory]
> Mode: Enhanced Retransmission (0x03)
> TX window size: 32
> Max transmit: 255
> Retransmission timeout: 0
> Monitor timeout: 0
> Maximum PDU size: 65527
> Option: Frame Check Sequence (0x05) [mandatory]
> FCS: 16-bit FCS (0x01)
> < ACL Data TX: Handle 11 flags 0x00 dlen 29
> L2CAP: Configure Response (0x05) ident 72 len 21
> Source CID: 14608
> Flags: 0x0000
> Result: Success (0x0000)
> Option: Maximum Transmission Unit (0x01) [mandatory]
> MTU: 672
> Option: Retransmission and Flow Control (0x04) [mandatory]
> Mode: Enhanced Retransmission (0x03)
> TX window size: 32
> Max transmit: 255
> Retransmission timeout: 2000
> Monitor timeout: 12000
> Maximum PDU size: 1009
> > ACL Data RX: Handle 11 flags 0x02 dlen 32
> L2CAP: Configure Response (0x05) ident 20 len 24
> Source CID: 72
> Flags: 0x0000
> Result: Success (0x0000)
> Option: Maximum Transmission Unit (0x01) [mandatory]
> MTU: 32767
> Option: Retransmission and Flow Control (0x04) [mandatory]
> Mode: Enhanced Retransmission (0x03)
> TX window size: 63
> Max transmit: 3
> Retransmission timeout: 2000
> Monitor timeout: 12000
> Maximum PDU size: 1009
> Option: Frame Check Sequence (0x05) [mandatory]
> FCS: 16-bit FCS (0x01)
> ...
> < ACL Data TX: Handle 11 flags 0x00 dlen 34
> Channel: 14608 len 30 ctrl 0x0000 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
> I-frame: Unsegmented TxSeq 0 ReqSeq 0
> 00 00 80 00 1a 10 00 02 a0 46 00 13 71 63 dd 54 .........F..qc.T
> 4a 7e 11 e2 b4 7c 00 50 c2 49 00 48 b4 55 J~...|.P.I.H.U
> ...
> > ACL Data RX: Handle 11 flags 0x02 dlen 680
> Channel: 72 len 676 ctrl 0x0202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
> I-frame: Unsegmented TxSeq 1 ReqSeq 2
> < ACL Data TX: Handle 11 flags 0x00 dlen 13
> Channel: 14608 len 9 ctrl 0x0204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
> I-frame: Unsegmented TxSeq 2 ReqSeq 2
> > ACL Data RX: Handle 11 flags 0x02 dlen 680
> Channel: 72 len 676 ctrl 0x0304 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
> I-frame: Unsegmented TxSeq 2 ReqSeq 3
>
> [...]
Here is the summary with links:
- [BlueZ] obexd: client: Fix connect RX MTU
https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=99abc8a9e1e1
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
