Commands marked as "Previously used" in the Bluetooth Core Specification
Version 6.0 were not updated to keep the library compatible with old HCI
controllers.
---
lib/bluetooth/hci.c | 253 ++++++++++++++++++++++++++++++++++++++------
1 file changed, 218 insertions(+), 35 deletions(-)
diff --git a/lib/bluetooth/hci.c b/lib/bluetooth/hci.c
index a1eccaf1e..402aee441 100644
--- a/lib/bluetooth/hci.c
+++ b/lib/bluetooth/hci.c
@@ -333,7 +333,10 @@ int hci_strtolm(char *str, unsigned int *val)
return ret;
}
-/* Command mapping */
+/* Command mapping
+ * Core Specification Version 6.0 | Vol 4, Part E
+ * 6.27. Supported commands
+ */
static const hci_map commands_map[] = {
{ "Inquiry", 0 },
{ "Inquiry Cancel", 1 },
@@ -355,7 +358,7 @@ static const hci_map commands_map[] = {
{ "Set Connection Encryption", 16 },
{ "Change Connection Link Key", 17 },
- { "Temporary Link Key", 18 },
+ { "Link Key Selection", 18 },
{ "Remote Name Request", 19 },
{ "Cancel Remote Name Request", 20 },
{ "Read Remote Supported Features", 21 },
@@ -430,13 +433,13 @@ static const hci_map commands_map[] = {
{ "Read Transmit Power Level", 82 },
{ "Read Synchronous Flow Control Enable", 83 },
{ "Write Synchronous Flow Control Enable", 84 },
- { "Set Host Controller To Host Flow Control", 85 },
+ { "Set Controller To Host Flow Control", 85 },
{ "Host Buffer Size", 86 },
{ "Host Number Of Completed Packets", 87 },
{ "Read Link Supervision Timeout", 88 },
{ "Write Link Supervision Timeout", 89 },
- { "Read Number of Supported IAC", 90 },
+ { "Read Number Of Supported IAC", 90 },
{ "Read Current IAC LAP", 91 },
{ "Write Current IAC LAP", 92 },
{ "Read Page Scan Period Mode", 93 },
@@ -444,9 +447,9 @@ static const hci_map commands_map[] = {
{ "Read Page Scan Mode", 95 },
{ "Write Page Scan Mode", 96 },
- { "Set AFH Channel Classification", 97 },
- { "Reserved", 98 },
- { "Reserved", 99 },
+ { "Set AFH Host Channel Classification", 97 },
+ { "LE CS Read Remote FAE Table", 98 },
+ { "LE CS Write Cached Remote FAE Table", 99 },
{ "Read Inquiry Scan Type", 100 },
{ "Write Inquiry Scan Type", 101 },
{ "Read Inquiry Mode", 102 },
@@ -474,19 +477,19 @@ static const hci_map commands_map[] = {
{ "Read BD ADDR", 121 },
{ "Read Failed Contact Counter", 122 },
{ "Reset Failed Contact Counter", 123 },
- { "Get Link Quality", 124 },
+ { "Read Link Quality", 124 },
{ "Read RSSI", 125 },
{ "Read AFH Channel Map", 126 },
- { "Read BD Clock", 127 },
+ { "Read Clock", 127 },
{ "Read Loopback Mode", 128 },
{ "Write Loopback Mode", 129 },
- { "Enable Device Under Test Mode", 130 },
- { "Setup Synchronous Connection", 131 },
- { "Accept Synchronous Connection", 132 },
- { "Reject Synchronous Connection", 133 },
- { "Reserved", 134 },
- { "Reserved", 135 },
+ { "Enable Implementation Under Test Mode", 130 },
+ { "Setup Synchronous Connection Request", 131 },
+ { "Accept Synchronous Connection Request", 132 },
+ { "Reject Synchronous Connection Request", 133 },
+ { "LE CS Create Config", 134 },
+ { "LE CS Remove Config", 135 },
{ "Read Extended Inquiry Response", 136 },
{ "Write Extended Inquiry Response", 137 },
@@ -520,9 +523,9 @@ static const hci_map commands_map[] = {
{ "Send Keypress Notification", 162 },
{ "IO Capability Request Negative Reply", 163 },
{ "Read Encryption Key Size", 164 },
- { "Reserved", 165 },
- { "Reserved", 166 },
- { "Reserved", 167 },
+ { "LE CS Read Local Supported Capabilities", 165 },
+ { "LE CS Read Remote Supported Capabilities", 166 },
+ { "LE CS Write Cached Remote Supported Capabilities", 167 },
{ "Create Physical Link", 168 },
{ "Accept Physical Link", 169 },
@@ -545,56 +548,236 @@ static const hci_map commands_map[] = {
{ "Read Flow Control Mode", 184 },
{ "Write Flow Control Mode", 185 },
{ "Read Data Block Size", 186 },
- { "Reserved", 187 },
- { "Reserved", 188 },
+ { "LE CS Test", 187 },
+ { "LE CS Test End", 188 },
{ "Enable AMP Receiver Reports", 189 },
{ "AMP Test End", 190 },
{ "AMP Test Command", 191 },
{ "Read Enhanced Transmit Power Level", 192 },
- { "Reserved", 193 },
+ { "LE CS Security Enable", 193 },
{ "Read Best Effort Flush Timeout", 194 },
{ "Write Best Effort Flush Timeout", 195 },
{ "Short Range Mode", 196 },
{ "Read LE Host Support", 197 },
{ "Write LE Host Support", 198 },
- { "Reserved", 199 },
+ { "LE CS Set Default Settings", 199 },
{ "LE Set Event Mask", 200 },
- { "LE Read Buffer Size", 201 },
- { "LE Read Local Supported Features", 202 },
+ { "LE Read Buffer Size [v1]", 201 },
+ { "LE Read Local Supported Features Page 0", 202 },
{ "Reserved", 203 },
{ "LE Set Random Address", 204 },
{ "LE Set Advertising Parameters", 205 },
- { "LE Read Advertising Channel TX Power", 206 },
+ { "LE Read Advertising Physical Channel Tx Power", 206 },
{ "LE Set Advertising Data", 207 },
{ "LE Set Scan Response Data", 208 },
- { "LE Set Advertise Enable", 209 },
+ { "LE Set Advertising Enable", 209 },
{ "LE Set Scan Parameters", 210 },
{ "LE Set Scan Enable", 211 },
{ "LE Create Connection", 212 },
{ "LE Create Connection Cancel", 213 },
- { "LE Read Accept List Size", 214 },
- { "LE Clear Accept List", 215 },
+ { "LE Read Filter Accept List Size", 214 },
+ { "LE Clear Filter Accept List", 215 },
- { "LE Add Device To Accept List", 216 },
- { "LE Remove Device From Accept List", 217 },
+ { "LE Add Device To Filter Accept List", 216 },
+ { "LE Remove Device From Filter Accept List", 217 },
{ "LE Connection Update", 218 },
{ "LE Set Host Channel Classification", 219 },
{ "LE Read Channel Map", 220 },
- { "LE Read Remote Used Features", 221 },
+ { "LE Read Remote Features Page 0", 221 },
{ "LE Encrypt", 222 },
{ "LE Rand", 223 },
- { "LE Start Encryption", 224 },
+ { "LE Enable Encryption", 224 },
{ "LE Long Term Key Request Reply", 225 },
{ "LE Long Term Key Request Negative Reply", 226 },
{ "LE Read Supported States", 227 },
- { "LE Receiver Test", 228 },
- { "LE Transmitter Test", 229 },
+ { "LE Receiver Test [v1]", 228 },
+ { "LE Transmitter Test [v1]", 229 },
{ "LE Test End", 230 },
- { "Reserved", 231 },
+ { "LE Enable Monitoring Advertisers", 231 },
+
+ { "LE CS Set Channel Classification", 232 },
+ { "LE CS Set Procedure Parameters", 233 },
+ { "LE CS Procedure Enable", 234 },
+ { "Enhanced Setup Synchronous Connection", 235 },
+ { "Enhanced Accept Synchronous Connection", 236 },
+ { "Read Local Supported Codecs [v1]", 237 },
+ { "Set MWS Channel Parameters", 238 },
+ { "Set External Frame Configuration", 239 },
+
+ { "Set MWS Signaling", 240 },
+ { "Set MWS Transport Layer", 241 },
+ { "Set MWS Scan Frequency Table", 242 },
+ { "Get MWS Transport Layer Configuration", 243 },
+ { "Set MWS PATTERN Configuration", 244 },
+ { "Set Triggered Clock Capture", 245 },
+ { "Truncated Page", 246 },
+ { "Truncated Page Cancel", 247 },
+
+ { "Set Connectionless Peripheral Broadcast", 248 },
+ { "Set Connectionless Peripheral Broadcast Receive", 249 },
+ { "Start Synchronization Train", 250 },
+ { "Receive Synchronization Train", 251 },
+ { "Set Reserved LT ADDR", 252 },
+ { "Delete Reserved LT ADDR", 253 },
+ { "Set Connectionless Peripheral Broadcast Data", 254 },
+ { "Read Synchronization Train Parameters", 255 },
+
+ { "Write Synchronization Train Parameters", 256 },
+ { "Remote OOB Extended Data Request Reply", 257 },
+ { "Read Secure Connections Host Support", 258 },
+ { "Write Secure Connections Host Support", 259 },
+ { "Read Authenticated Payload Timeout", 260 },
+ { "Write Authenticated Payload Timeout", 261 },
+ { "Read Local OOB Extended Data", 262 },
+ { "Write Secure Connections Test Mode", 263 },
+
+ { "Read Extended Page Timeout", 264 },
+ { "Write Extended Page Timeout", 265 },
+ { "Read Extended Inquiry Length", 266 },
+ { "Write Extended Inquiry Length", 267 },
+ { "LE Remote Connection Parameter Request Reply", 268 },
+ { "LE Remote Connection Parameter Request Negative Reply", 269 },
+ { "LE Set Data Length", 270 },
+ { "LE Read Suggested Default Data Length", 271 },
+
+ { "LE Write Suggested Default Data Length", 272 },
+ { "LE Read Local P-256 Public Key", 273 },
+ { "LE Generate DHKey [v1]", 274 },
+ { "LE Add Device To Resolving List", 275 },
+ { "LE Remove Device From Resolving List", 276 },
+ { "LE Clear Resolving List", 277 },
+ { "LE Read Resolving List Size", 278 },
+ { "LE Read Peer Resolvable Address", 279 },
+
+ { "LE Read Local Resolvable Address", 280 },
+ { "LE Set Address Resolution Enable", 281 },
+ { "LE Set Resolvable Private Address Timeout", 282 },
+ { "LE Read Maximum Data Length", 283 },
+ { "LE Read PH", 284 },
+ { "LE Set Default PHY", 285 },
+ { "LE Set PHY", 286 },
+ { "LE Receiver Test [v2]", 287 },
+
+ { "LE Transmitter Test [v2]", 288 },
+ { "LE Set Advertising Set Random Address", 289 },
+ { "LE Set Extended Advertising Parameters [v1]", 290 },
+ { "LE Set Extended Advertising Data", 291 },
+ { "LE Set Extended Scan Response Data", 292 },
+ { "LE Set Extended Advertising Enable", 293 },
+ { "LE Read Maximum Advertising Data Length", 294 },
+ { "LE Read Number of Supported Advertising Sets", 295 },
+
+ { "LE Remove Advertising Set", 296 },
+ { "LE Clear Advertising Sets", 297 },
+ { "LE Set Periodic Advertising Parameters [v1]", 298 },
+ { "LE Set Periodic Advertising Data", 299 },
+ { "LE Set Periodic Advertising Enable", 300 },
+ { "LE Set Extended Scan Parameters", 301 },
+ { "LE Set Extended Scan Enable", 302 },
+ { "LE Extended Create Connection [v1]", 303 },
+
+ { "LE Periodic Advertising Create Sync", 304 },
+ { "LE Periodic Advertising Create Sync Cancel", 305 },
+ { "LE Periodic Advertising Terminate Sync", 306 },
+ { "LE Add Device To Periodic Advertiser List", 307 },
+ { "LE Remove Device From Periodic Advertiser List", 308 },
+ { "LE Clear Periodic Advertiser List", 309 },
+ { "LE Read Periodic Advertiser List Size", 310 },
+ { "LE Read Transmit Power", 311 },
+
+ { "LE Read RF Path Compensation", 312 },
+ { "LE Write RF Path Compensation", 313 },
+ { "LE Set Privacy Mode", 314 },
+ { "LE Receiver Test [v3]", 315 },
+ { "LE Transmitter Test [v3]", 316 },
+ { "LE Set Connectionless CTE Transmit Parameters", 317 },
+ { "LE Set Connectionless CTE Transmit Enable", 318 },
+ { "LE Set Connectionless IQ Sampling Enable", 319 },
+
+ { "LE Set Connection CTE Receive Parameters", 320 },
+ { "LE Set Connection CTE Transmit Parameters", 321 },
+ { "LE Connection CTE Request Enable", 322 },
+ { "LE Connection CTE Response Enable", 323 },
+ { "LE Read Antenna Information", 324 },
+ { "LE Set Periodic Advertising Receive Enable", 325 },
+ { "LE Periodic Advertising Sync Transfer", 326 },
+ { "LE Periodic Advertising Set Info Transfer", 327 },
+
+ { "LE Set Periodic Advertising Sync Transfer Parameters", 328 },
+ { "LE Set Default Periodic Advertising Sync Transfer Parameters", 329 },
+ { "LE Generate DHKey [v2]", 330 },
+ { "Read Local Simple Pairing Options", 331 },
+ { "LE Modify Sleep Clock Accuracy", 332 },
+ { "LE Read Buffer Size [v2]", 333 },
+ { "LE Read ISO TX Sync", 334 },
+ { "LE Set CIG Parameters", 335 },
+
+ { "LE Set CIG Parameters Test", 336 },
+ { "LE Create CIS", 337 },
+ { "LE Remove CIG", 338 },
+ { "LE Accept CIS Request", 339 },
+ { "LE Reject CIS Request", 340 },
+ { "LE Create BIG", 341 },
+ { "LE Create BIG Test", 342 },
+ { "LE Terminate BIG", 343 },
+
+ { "LE BIG Create Sync", 344 },
+ { "LE BIG Terminate Sync", 345 },
+ { "LE Request Peer SCA", 346 },
+ { "LE Setup ISO Data Path", 347 },
+ { "LE Remove ISO Data Path", 348 },
+ { "LE ISO Transmit Test", 349 },
+ { "LE ISO Receive Test", 350 },
+ { "LE ISO Read Test Counters", 351 },
+
+ { "LE ISO Test End", 352 },
+ { "LE Set Host Feature [v1]", 353 },
+ { "LE Read ISO Link Quality", 354 },
+ { "LE Enhanced Read Transmit Power Level", 355 },
+ { "LE Read Remote Transmit Power Level", 356 },
+ { "LE Set Path Loss Reporting Parameters", 357 },
+ { "LE Set Path Loss Reporting Enable", 358 },
+ { "LE Set Transmit Power Reporting Enable", 359 },
+
+ { "LE Transmitter Test [v4]", 360 },
+ { "Set Ecosystem Base Interval", 361 },
+ { "Read Local Supported Codecs [v2]", 362 },
+ { "Read Local Supported Codec Capabilities", 363 },
+ { "Read Local Supported Controller Delay", 364 },
+ { "Configure Data Path", 365 },
+ { "LE Set Data Related Address Changes", 366 },
+ { "Set Min Encryption Key Size", 367 },
+
+ { "LE Set Default Subrate command", 368 },
+ { "LE Subrate Request command", 369 },
+ { "LE Set Extended Advertising Parameters [v2]", 370 },
+ { "LE Set Decision Data", 371 },
+ { "LE Set Decision Instructions", 372 },
+ { "LE Set Periodic Advertising Subevent Data", 373 },
+ { "LE Set Periodic Advertising Response Data", 374 },
+ { "LE Set Periodic Sync Subevent", 375 },
+
+ { "LE Extended Create Connection [v2]", 376 },
+ { "LE Set Periodic Advertising Parameters [v2]", 377 },
+ { "LE Read All Local Supported Features", 378 },
+ { "LE Read All Remote Features", 379 },
+ { "LE Set Host Feature [v2]", 380 },
+ { "LE Add Device To Monitored Advertisers List", 381 },
+ { "LE Remove Device From Monitored Advertisers List", 382 },
+ { "LE Clear Monitored Advertisers List", 383 },
+
+ { "LE Read Monitored Advertisers List Size", 384 },
+ { "LE Frame Space Update", 385 },
+ { "Reserved", 386 },
+ { "Reserved", 387 },
+ { "Reserved", 388 },
+ { "Reserved", 389 },
+ { "Reserved", 390 },
+ { "Reserved", 391 },
{ NULL }
};
--
2.47.2
