Branch: refs/heads/995586 Home: https://github.com/bluez/bluez Commit: 50da77ff57d484042901c8486d345d378ece453f https://github.com/bluez/bluez/commit/50da77ff57d484042901c8486d345d378ece453f Author: Frédéric Danis <frederic.danis@xxxxxxxxxxxxx> Date: 2025-08-26 (Tue, 26 Aug 2025) Changed paths: M obexd/client/session.c Log Message: ----------- obexd: client: Fix connect RX MTU OBEX download from iPhone is currently slow due to small packet size used to transfer data which doesn't follow the MTU negotiated during L2CAP connection, i.e. 672 bytes instead of 32767: < ACL Data TX: Handle 11 flags 0x00 dlen 12 L2CAP: Connection Request (0x02) ident 18 len 4 PSM: 4103 (0x1007) Source CID: 72 > ACL Data RX: Handle 11 flags 0x02 dlen 16 L2CAP: Connection Response (0x03) ident 18 len 8 Destination CID: 14608 Source CID: 72 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 11 flags 0x00 dlen 27 L2CAP: Configure Request (0x04) ident 20 len 19 Destination CID: 14608 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 32767 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 63 Max transmit: 3 Retransmission timeout: 2000 Monitor timeout: 12000 Maximum PDU size: 1009 > ACL Data RX: Handle 11 flags 0x02 dlen 26 L2CAP: Configure Request (0x04) ident 72 len 18 Destination CID: 72 Flags: 0x0000 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 32 Max transmit: 255 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 65527 Option: Frame Check Sequence (0x05) [mandatory] FCS: 16-bit FCS (0x01) < ACL Data TX: Handle 11 flags 0x00 dlen 29 L2CAP: Configure Response (0x05) ident 72 len 21 Source CID: 14608 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 32 Max transmit: 255 Retransmission timeout: 2000 Monitor timeout: 12000 Maximum PDU size: 1009 > ACL Data RX: Handle 11 flags 0x02 dlen 32 L2CAP: Configure Response (0x05) ident 20 len 24 Source CID: 72 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 32767 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Enhanced Retransmission (0x03) TX window size: 63 Max transmit: 3 Retransmission timeout: 2000 Monitor timeout: 12000 Maximum PDU size: 1009 Option: Frame Check Sequence (0x05) [mandatory] FCS: 16-bit FCS (0x01) ... < ACL Data TX: Handle 11 flags 0x00 dlen 34 Channel: 14608 len 30 ctrl 0x0000 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8} I-frame: Unsegmented TxSeq 0 ReqSeq 0 00 00 80 00 1a 10 00 02 a0 46 00 13 71 63 dd 54 .........F..qc.T 4a 7e 11 e2 b4 7c 00 50 c2 49 00 48 b4 55 J~...|.P.I.H.U ... > ACL Data RX: Handle 11 flags 0x02 dlen 680 Channel: 72 len 676 ctrl 0x0202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8} I-frame: Unsegmented TxSeq 1 ReqSeq 2 < ACL Data TX: Handle 11 flags 0x00 dlen 13 Channel: 14608 len 9 ctrl 0x0204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8} I-frame: Unsegmented TxSeq 2 ReqSeq 2 > ACL Data RX: Handle 11 flags 0x02 dlen 680 Channel: 72 len 676 ctrl 0x0304 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8} I-frame: Unsegmented TxSeq 2 ReqSeq 3 The OBEX CONNECT request uses the negotiated output MTU (672, 0x02a0) as the maximum OBEX packet length the client is able to receive instead of the negotiated input MTU (32767). This commit swap rx_mtu and tx_mtu as g_obex_new() is defined as: GObex *g_obex_new(GIOChannel *io, GObexTransportType transport_type, gssize rx_mtu, gssize tx_mtu); To unsubscribe from these emails, change your notification settings at https://github.com/bluez/bluez/settings/notifications
