Makes the platform Bluetooth to be reset by hardware pin,
it provides two methods to do it for mediatek controller,
and it has been tested locally many times and can reset normally.
When an exception occurs, resetting Bluetooth by hardware pin
is more stable than resetting Bluetooth by software.
If the corresponding pin is not found in dts,
bluetooth can also be reset successfully.
Co-developed: Hao Qin <hao.qin@xxxxxxxxxxxx>
Co-developed: Chris Lu <chris.lu@xxxxxxxxxxxx>
Co-developed: Jiande Lu <jiande.lu@xxxxxxxxxxxx>
Signed-off-by: Zhangchao Zhang <ot_zhangchao.zhang@xxxxxxxxxxxx>
---
drivers/bluetooth/btmtk.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index 4390fd571dbd..29d6a93f255d 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -6,6 +6,8 @@
#include <linux/firmware.h>
#include <linux/usb.h>
#include <linux/iopoll.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
#include <linux/unaligned.h>
#include <net/bluetooth/bluetooth.h>
@@ -359,11 +361,41 @@ int btmtk_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
}
EXPORT_SYMBOL_GPL(btmtk_set_bdaddr);
+static int btmtk_hw_gpio_reset(struct hci_dev *hdev, struct btmtk_data *reset_work)
+{
+ struct gpio_desc *reset_gpio;
+
+ /* Find device node*/
+ hdev->dev.of_node = of_find_compatible_node(NULL, NULL, "mediatek,mt7925-bluetooth");
+ reset_gpio = gpiod_get_optional(hdev->dev.of_node, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(reset_gpio))
+ return PTR_ERR(reset_gpio);
+
+ if (!reset_gpio)
+ return -ENODEV;
+
+ if (test_and_set_bit(BTMTK_HW_RESET_ACTIVE, &reset_work->flags)) {
+ bt_dev_err(hdev, "last reset failed? Not resetting again");
+ gpiod_put(reset_gpio);
+ return -EBUSY;
+ }
+ gpiod_set_value_cansleep(reset_gpio, 0);
+ msleep(100);
+ gpiod_set_value_cansleep(reset_gpio, 1);
+ gpiod_put(reset_gpio);
+ return 0;
+}
+
void btmtk_reset_sync(struct hci_dev *hdev)
{
struct btmtk_data *reset_work = hci_get_priv(hdev);
int err;
+ /* Try hardware GPIO reset*/
+ err = btmtk_hw_gpio_reset(hdev, reset_work);
+ if (!err)
+ return;
+ /* Otherwise, do software reset */
hci_dev_lock(hdev);
err = hci_cmd_sync_queue(hdev, reset_work->reset_sync, NULL, NULL);
--
2.45.2
